hi,
i did not, as i thought it didn't it because it was registering as a public IP already. i will try that. thanks
regards, nhadie
Eneref wrote:
Do you have STUN support enabled on the PAP2?
N.
Nhadie wrote:
Hi All,
I'm testing the default of config of ser, and just adding some nathelper command to make it 2 UA's work, I have an x-lite and a PAP2 both are behind nat.
X-lite is being detected by ser as behind NAT, but the PAP2 isn't, the ser thinks the PAP2 is registering with public IP.
When I call from PAP2 to X-lite, i have no problem, because the c= IN on the SIP/200 OK reply is already public IP, so wehen PAP2 sends an ACK or BYE it sends it the c=IN of X-lite which is public IP.
But when I call vice versa, that PAP send c=IN as private IP so when X-lite sends an ACK/BYE, it wil send it to the private IP. which obviously will not be able to be recieved by PAP2.
How can I fix this? Another thing i don't get is that why PAP2 registers as not behind NAT, but when it replies to messages, it is sending the private IP on the c= IN.
Anyone experienced this before?
TIA
Regards, Nhadie _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers