Dears,
Am trying to apply Kamailio LCR feature lab test, after am finally able to run Kamailio with no errors, am not able to reach my target clarified in this following scenario:
Call 961312345 - route the call to 192.x.x.15 in first place and if failed route the call to 192.x.x.10. I applied needed configuration in lcr tables (attached image) and the routing script is:
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
if (!method=="REGISTER")
record_route();
if (loose_route()) {
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
append_hf("P-hint: outbound\r\n");
route(1);
};
if (is_method("INVITE"))
{
if (!load_gws(1)) {
sl_send_reply("503", "Unable to load gateways");
exit;
}
}
if (uri==myself) {
if (method=="REGISTER") {
save("location");
exit;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
# native SIP destinations are handled using ourUSRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
route(1);
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
BUT when attempting a call am getting the message 'Call failed: Not found .'
Any help to achieve the successful call using above scenario is highly appreciated.
Thanks in advance.
F.Chahrour
Attachment here!
From: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Fatima Chahrour~Vanrise Support Sent: Wednesday, August 08, 2012 6:32 PM To: 'SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List' Subject: [SR-Users] Kamailio LCR Module test scenario
Dears,
Am trying to apply Kamailio LCR feature lab test, after am finally able to run Kamailio with no errors, am not able to reach my target clarified in this following scenario:
Call 961312345 - route the call to 192.x.x.15 in first place and if failed route the call to 192.x.x.10. I applied needed configuration in lcr tables (attached image) and the routing script is:
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
if (!method=="REGISTER")
record_route();
if (loose_route()) {
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
append_hf("P-hint: outbound\r\n");
route(1);
};
if (is_method("INVITE"))
{
if (!load_gws(1)) {
sl_send_reply("503", "Unable to load gateways");
exit;
}
}
if (uri==myself) {
if (method=="REGISTER") {
save("location");
exit;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
# native SIP destinations are handled using ourUSRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
route(1);
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
BUT when attempting a call am getting the message 'Call failed: Not found .'
Any help to achieve the successful call using above scenario is highly appreciated.
Thanks in advance.
F.Chahrour
The below problem was solved after modifying the related routing logic.
Thanks!
From: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Fatima Chahrour~Vanrise Support Sent: Wednesday, August 08, 2012 8:23 PM To: 'SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List' Subject: Re: [SR-Users] Kamailio LCR Module test scenario
Attachment here!
From: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Fatima Chahrour~Vanrise Support Sent: Wednesday, August 08, 2012 6:32 PM To: 'SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List' Subject: [SR-Users] Kamailio LCR Module test scenario
Dears,
Am trying to apply Kamailio LCR feature lab test, after am finally able to run Kamailio with no errors, am not able to reach my target clarified in this following scenario:
Call 961312345 - route the call to 192.x.x.15 in first place and if failed route the call to 192.x.x.10. I applied needed configuration in lcr tables (attached image) and the routing script is:
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
if (!method=="REGISTER")
record_route();
if (loose_route()) {
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
append_hf("P-hint: outbound\r\n");
route(1);
};
if (is_method("INVITE"))
{
if (!load_gws(1)) {
sl_send_reply("503", "Unable to load gateways");
exit;
}
}
if (uri==myself) {
if (method=="REGISTER") {
save("location");
exit;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
# native SIP destinations are handled using ourUSRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
route(1);
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
BUT when attempting a call am getting the message 'Call failed: Not found .'
Any help to achieve the successful call using above scenario is highly appreciated.
Thanks in advance.
F.Chahrour
-
Fatima Chahrour~ Vanrise Technical Support -
Fatima Chahrour~Vanrise Support