Hi again,
I start rtpproxy like this: rtpproxy -2f -l 193.55.55.55/10.245.x.x can someone give me a quick hint what problem could cause this output:
outgoing calls work & have this output:
received command "U 5e04ce62ad145445YTczODQwZGYxMDVhODNjODYwZWE0YzQxOTA3OGEwMmM.10.245.16.55 45746 6879e139" new session 5e04ce62ad145445YTczODQwZGYxMDVhODNjODYwZWE0YzQxOTA3OGEwMmM., tag 68 9 requested, type strong new session on a port 35000 created, tag 6879e139 pre-filling caller's address with 10.245.16.55:45746 sending reply "35000 193.77.54.68 "
incoming calls dont work & have this output:
received command "L 30e096903015a6b321b8fcbe29eafda8@217.10.67.4 10.245.16.55 44 224 as15976aa3 71195064" lookup request failed: session 30e096903015a6b321b8fcbe29eafda8@217.10.67.4, tags as15976aa3/71195064 not found sending reply "0 193.77.54.68 "
Thanks
Sebastian
-----Ursprüngliche Nachricht----- Von: Sebastian Gabris Sebastian.Gabris@web.de Gesendet: 11.08.06 13:47:11 An: serusers@lists.iptel.org Betreff: [Serusers] Problem with incoming calls
Hi everybody,
Like told in the subject i got problems with incomnig calls, SIP signalling works but RTP doesnt. When I make a call from my UA to the VoIP-Provider all works well, sip & rtp. I start rtpproxy in bridged mode: rtpproxy -l publicIP/privateIP.
I use this scenario:
UA(private IP) <-> (privateIP) SER (publicIP) <-> VoIP-Provider
i try to figure out where my mistake is in this config file:
route[1] { if(dst_ip == 10.245.104.68) { force_rtp_proxy("","193.77.54.68"); } else { force_rtp_proxy("","10.245.104.68"); };
t_on_reply("1"); if (!t_relay()) { sl_reply_error(); };
}
onreply_route[1] { if (status =~ "(183)|2[0-9][0-9]") { if(dst_ip == 10.245.104.68) { force_rtp_proxy("","193.77.54.68"); } else { force_rtp_proxy("","10.245.104.68"); };
};
}
By the way, is there a option to view rtpproxy debug info?
Thanks in advance!
Sebastian ______________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
_____________________________________________________________________ Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! http://smartsurfer.web.de/?mc=100071&distributionid=000000000071
use_media_proxy() was not called for the INVITE, only the OK. g-)
Sebastian Gabris wrote:
Hi again,
I start rtpproxy like this: rtpproxy -2f -l 193.55.55.55/10.245.x.x can someone give me a quick hint what problem could cause this output:
outgoing calls work & have this output:
received command "U 5e04ce62ad145445YTczODQwZGYxMDVhODNjODYwZWE0YzQxOTA3OGEwMmM.10.245.16.55 45746 6879e139" new session 5e04ce62ad145445YTczODQwZGYxMDVhODNjODYwZWE0YzQxOTA3OGEwMmM., tag 68 9 requested, type strong new session on a port 35000 created, tag 6879e139 pre-filling caller's address with 10.245.16.55:45746 sending reply "35000 193.77.54.68 "
incoming calls dont work & have this output:
received command "L 30e096903015a6b321b8fcbe29eafda8@217.10.67.4 10.245.16.55 44 224 as15976aa3 71195064" lookup request failed: session 30e096903015a6b321b8fcbe29eafda8@217.10.67.4, tags as15976aa3/71195064 not found sending reply "0 193.77.54.68 "
Thanks
Sebastian
-----Ursprüngliche Nachricht----- Von: Sebastian Gabris Sebastian.Gabris@web.de Gesendet: 11.08.06 13:47:11 An: serusers@lists.iptel.org Betreff: [Serusers] Problem with incoming calls
Hi everybody,
Like told in the subject i got problems with incomnig calls, SIP signalling works but RTP doesnt. When I make a call from my UA to the VoIP-Provider all works well, sip & rtp. I start rtpproxy in bridged mode: rtpproxy -l publicIP/privateIP.
I use this scenario:
UA(private IP) <-> (privateIP) SER (publicIP) <-> VoIP-Provider
i try to figure out where my mistake is in this config file:
route[1] { if(dst_ip == 10.245.104.68) { force_rtp_proxy("","193.77.54.68"); } else { force_rtp_proxy("","10.245.104.68"); };
t_on_reply("1"); if (!t_relay()) { sl_reply_error(); };
}
onreply_route[1] { if (status =~ "(183)|2[0-9][0-9]") { if(dst_ip == 10.245.104.68) { force_rtp_proxy("","193.77.54.68"); } else { force_rtp_proxy("","10.245.104.68"); };
};
}
By the way, is there a option to view rtpproxy debug info?
Thanks in advance!
Sebastian ______________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! http://smartsurfer.web.de/?mc=100071&distributionid=000000000071
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers