I managed to create about 1900 concurrent calls using a single Kamailio and RTPProxy server. But after this number RTPProxy returns 0 and the following error is shown in the Kamailio log files:
incorrect port 0 in reply from rtp proxy
What is the problem here? Also number of file descriptors that RTPProxy can use are set to a million.
Hello,
have you used a single rtpproxy instance? Was there RTP traffic for all 1900 calls? Is this with rtpproxy 1.2 or 2.0?
Cheers, Daniel
On 14/11/16 10:44, Gholamreza Sabery wrote:
I managed to create about 1900 concurrent calls using a single Kamailio and RTPProxy server. But after this number RTPProxy returns 0 and the following error is shown in the Kamailio log files:
incorrect port 0 in reply from rtp proxy What is the problem here? Also number of file descriptors that RTPProxy can use are set to a million.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Dear Daniel:
I used a single RTPProxy instance. RTPProxy version = 20040107. And yes there was traffic for all calls but traffic is one-way. One leg sends the call and the other just receives it.
On Mon, Nov 14, 2016 at 1:40 PM, Daniel-Constantin Mierla <miconda@gmail.com
wrote:
Hello,
have you used a single rtpproxy instance? Was there RTP traffic for all 1900 calls? Is this with rtpproxy 1.2 or 2.0?
Cheers, Daniel
On 14/11/16 10:44, Gholamreza Sabery wrote:
I managed to create about 1900 concurrent calls using a single Kamailio and RTPProxy server. But after this number RTPProxy returns 0 and the following error is shown in the Kamailio log files:
incorrect port 0 in reply from rtp proxy
What is the problem here? Also number of file descriptors that RTPProxy can use are set to a million.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
first thing to look at is the port range. There are some parameter that you can provide to rtpproxy in command line in order to increase the range of port it can use -- see 'rtpproxy -h' or 'man rtpproxy'.
Cheers, Daniel
On 14/11/16 11:14, Gholamreza Sabery wrote:
Dear Daniel:
I used a single RTPProxy instance. RTPProxy version = 20040107. And yes there was traffic for all calls but traffic is one-way. One leg sends the call and the other just receives it.
On Mon, Nov 14, 2016 at 1:40 PM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
Hello, have you used a single rtpproxy instance? Was there RTP traffic for all 1900 calls? Is this with rtpproxy 1.2 or 2.0? Cheers, Daniel On 14/11/16 10:44, Gholamreza Sabery wrote:I managed to create about 1900 concurrent calls using a single Kamailio and RTPProxy server. But after this number RTPProxy returns 0 and the following error is shown in the Kamailio log files: incorrect port 0 in reply from rtp proxy What is the problem here? Also number of file descriptors that RTPProxy can use are set to a million. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
I already set these parameters:
rtpproxy -m 5000 -M 65000
As well limits for number of open files are set to 1000000 (ulimit -n). When I increased log level of RTPProxy I saw: ERR:create_twinlistener:GENERAL: can't create IPv4 socket: Too many open files in system
On Mon, Nov 14, 2016 at 1:46 PM, Daniel-Constantin Mierla <miconda@gmail.com
wrote:
Hello,
first thing to look at is the port range. There are some parameter that you can provide to rtpproxy in command line in order to increase the range of port it can use -- see 'rtpproxy -h' or 'man rtpproxy'.
Cheers, Daniel
On 14/11/16 11:14, Gholamreza Sabery wrote:
Dear Daniel:
I used a single RTPProxy instance. RTPProxy version = 20040107. And yes there was traffic for all calls but traffic is one-way. One leg sends the call and the other just receives it.
On Mon, Nov 14, 2016 at 1:40 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
have you used a single rtpproxy instance? Was there RTP traffic for all 1900 calls? Is this with rtpproxy 1.2 or 2.0?
Cheers, Daniel
On 14/11/16 10:44, Gholamreza Sabery wrote:
I managed to create about 1900 concurrent calls using a single Kamailio and RTPProxy server. But after this number RTPProxy returns 0 and the following error is shown in the Kamailio log files:
incorrect port 0 in reply from rtp proxy
What is the problem here? Also number of file descriptors that RTPProxy can use are set to a million.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cg i-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
Are you getting the error first time when you reach first 1900 sessions? Or after a while, after some previous sessions are ended?
Cheers, Daniel
On 14/11/16 11:19, Gholamreza Sabery wrote:
I already set these parameters:
rtpproxy -m 5000 -M 65000
As well limits for number of open files are set to 1000000 (ulimit -n). When I increased log level of RTPProxy I saw: ERR:create_twinlistener:GENERAL: can't create IPv4 socket: Too many open files in system
On Mon, Nov 14, 2016 at 1:46 PM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
Hello, first thing to look at is the port range. There are some parameter that you can provide to rtpproxy in command line in order to increase the range of port it can use -- see 'rtpproxy -h' or 'man rtpproxy'. Cheers, Daniel On 14/11/16 11:14, Gholamreza Sabery wrote:Dear Daniel: I used a single RTPProxy instance. RTPProxy version = 20040107. And yes there was traffic for all calls but traffic is one-way. One leg sends the call and the other just receives it. On Mon, Nov 14, 2016 at 1:40 PM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote: Hello, have you used a single rtpproxy instance? Was there RTP traffic for all 1900 calls? Is this with rtpproxy 1.2 or 2.0? Cheers, Daniel On 14/11/16 10:44, Gholamreza Sabery wrote:I managed to create about 1900 concurrent calls using a single Kamailio and RTPProxy server. But after this number RTPProxy returns 0 and the following error is shown in the Kamailio log files: incorrect port 0 in reply from rtp proxy What is the problem here? Also number of file descriptors that RTPProxy can use are set to a million. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
No not the first time. But over time. I rebooted my system and error is gone! It seems that it happens over time.
On Mon, Nov 14, 2016 at 6:12 PM, Daniel-Constantin Mierla <miconda@gmail.com
wrote:
Are you getting the error first time when you reach first 1900 sessions? Or after a while, after some previous sessions are ended? Cheers, Daniel
On 14/11/16 11:19, Gholamreza Sabery wrote:
I already set these parameters:
rtpproxy -m 5000 -M 65000
As well limits for number of open files are set to 1000000 (ulimit -n). When I increased log level of RTPProxy I saw: ERR:create_twinlistener:GENERAL: can't create IPv4 socket: Too many open files in system
On Mon, Nov 14, 2016 at 1:46 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
first thing to look at is the port range. There are some parameter that you can provide to rtpproxy in command line in order to increase the range of port it can use -- see 'rtpproxy -h' or 'man rtpproxy'.
Cheers, Daniel
On 14/11/16 11:14, Gholamreza Sabery wrote:
Dear Daniel:
I used a single RTPProxy instance. RTPProxy version = 20040107. And yes there was traffic for all calls but traffic is one-way. One leg sends the call and the other just receives it.
On Mon, Nov 14, 2016 at 1:40 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
have you used a single rtpproxy instance? Was there RTP traffic for all 1900 calls? Is this with rtpproxy 1.2 or 2.0?
Cheers, Daniel
On 14/11/16 10:44, Gholamreza Sabery wrote:
I managed to create about 1900 concurrent calls using a single Kamailio and RTPProxy server. But after this number RTPProxy returns 0 and the following error is shown in the Kamailio log files:
incorrect port 0 in reply from rtp proxy
What is the problem here? Also number of file descriptors that RTPProxy can use are set to a million.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cg i-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
--
Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
Are you ending the rtp proxy sessions when the call are ended? What rtpproxy functions are you using in the configuration file?
Cheers, Daniel
On 14/11/16 18:18, Gholamreza Sabery wrote:
No not the first time. But over time. I rebooted my system and error is gone! It seems that it happens over time.
On Mon, Nov 14, 2016 at 6:12 PM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
Are you getting the error first time when you reach first 1900 sessions? Or after a while, after some previous sessions are ended? Cheers, Daniel On 14/11/16 11:19, Gholamreza Sabery wrote:I already set these parameters: rtpproxy -m 5000 -M 65000 As well limits for number of open files are set to 1000000 (ulimit -n). When I increased log level of RTPProxy I saw: ERR:create_twinlistener:GENERAL: can't create IPv4 socket: Too many open files in system On Mon, Nov 14, 2016 at 1:46 PM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote: Hello, first thing to look at is the port range. There are some parameter that you can provide to rtpproxy in command line in order to increase the range of port it can use -- see 'rtpproxy -h' or 'man rtpproxy'. Cheers, Daniel On 14/11/16 11:14, Gholamreza Sabery wrote:Dear Daniel: I used a single RTPProxy instance. RTPProxy version = 20040107. And yes there was traffic for all calls but traffic is one-way. One leg sends the call and the other just receives it. On Mon, Nov 14, 2016 at 1:40 PM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote: Hello, have you used a single rtpproxy instance? Was there RTP traffic for all 1900 calls? Is this with rtpproxy 1.2 or 2.0? Cheers, Daniel On 14/11/16 10:44, Gholamreza Sabery wrote:I managed to create about 1900 concurrent calls using a single Kamailio and RTPProxy server. But after this number RTPProxy returns 0 and the following error is shown in the Kamailio log files: incorrect port 0 in reply from rtp proxy What is the problem here? Also number of file descriptors that RTPProxy can use are set to a million. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
Hi
Increase fs.file-max in your /etc/sysctl.conf . eg: fs.file-max = 50000 And then do sysctl -p Decrease SILENT_TIMEOUT in your rtpengine.conf (eg:SILENT_TIMEOUT=120) - it's default 1 hour and if some calls don't have media then rtpengine will just keep the UDP ports in use until this timeout expires.
Regards, Dragos
On 15/11/2016 09:01, Daniel-Constantin Mierla wrote:
Are you ending the rtp proxy sessions when the call are ended? What rtpproxy functions are you using in the configuration file?
Cheers, Daniel
On 14/11/16 18:18, Gholamreza Sabery wrote:
No not the first time. But over time. I rebooted my system and error is gone! It seems that it happens over time.
On Mon, Nov 14, 2016 at 6:12 PM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
Are you getting the error first time when you reach first 1900 sessions? Or after a while, after some previous sessions are ended? Cheers, Daniel On 14/11/16 11:19, Gholamreza Sabery wrote:I already set these parameters: rtpproxy -m 5000 -M 65000 As well limits for number of open files are set to 1000000 (ulimit -n). When I increased log level of RTPProxy I saw: ERR:create_twinlistener:GENERAL: can't create IPv4 socket: Too many open files in system On Mon, Nov 14, 2016 at 1:46 PM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote: Hello, first thing to look at is the port range. There are some parameter that you can provide to rtpproxy in command line in order to increase the range of port it can use -- see 'rtpproxy -h' or 'man rtpproxy'. Cheers, Daniel On 14/11/16 11:14, Gholamreza Sabery wrote:Dear Daniel: I used a single RTPProxy instance. RTPProxy version = 20040107. And yes there was traffic for all calls but traffic is one-way. One leg sends the call and the other just receives it. On Mon, Nov 14, 2016 at 1:40 PM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote: Hello, have you used a single rtpproxy instance? Was there RTP traffic for all 1900 calls? Is this with rtpproxy 1.2 or 2.0? Cheers, Daniel On 14/11/16 10:44, Gholamreza Sabery wrote:I managed to create about 1900 concurrent calls using a single Kamailio and RTPProxy server. But after this number RTPProxy returns 0 and the following error is shown in the Kamailio log files: incorrect port 0 in reply from rtp proxy What is the problem here? Also number of file descriptors that RTPProxy can use are set to a million. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com-- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Yes. I finish the session at the end of each call. Also I am using rtpproxy_manage("r"). My configuration regarding RTPProxy is default config which comes with Kamailio sample config file.
On Tue, Nov 15, 2016 at 11:44 AM, Dragos Oancea dragos.oancea@athonet.com wrote:
Hi
Increase fs.file-max in your /etc/sysctl.conf . eg: fs.file-max = 50000 And then do sysctl -p Decrease SILENT_TIMEOUT in your rtpengine.conf (eg:SILENT_TIMEOUT=120) - it's default 1 hour and if some calls don't have media then rtpengine will just keep the UDP ports in use until this timeout expires.
Regards, Dragos
On 15/11/2016 09:01, Daniel-Constantin Mierla wrote:
Are you ending the rtp proxy sessions when the call are ended? What rtpproxy functions are you using in the configuration file?
Cheers, Daniel
On 14/11/16 18:18, Gholamreza Sabery wrote:
No not the first time. But over time. I rebooted my system and error is gone! It seems that it happens over time.
On Mon, Nov 14, 2016 at 6:12 PM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
Are you getting the error first time when you reach first 1900 sessions? Or after a while, after some previous sessions are ended? Cheers, Daniel On 14/11/16 11:19, Gholamreza Sabery wrote:I already set these parameters: rtpproxy -m 5000 -M 65000 As well limits for number of open files are set to 1000000 (ulimit -n). When I increased log level of RTPProxy I saw: ERR:create_twinlistener:GENERAL: can't create IPv4 socket: Too many open files in system On Mon, Nov 14, 2016 at 1:46 PM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote: Hello, first thing to look at is the port range. There are some parameter that you can provide to rtpproxy in command line in order to increase the range of port it can use -- see 'rtpproxy -h' or 'man rtpproxy'. Cheers, Daniel On 14/11/16 11:14, Gholamreza Sabery wrote:Dear Daniel: I used a single RTPProxy instance. RTPProxy version = 20040107. And yes there was traffic for all calls but traffic is one-way. One leg sends the call and the other just receives it. On Mon, Nov 14, 2016 at 1:40 PM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote: Hello, have you used a single rtpproxy instance? Was there RTP traffic for all 1900 calls? Is this with rtpproxy 1.2 or 2.0? Cheers, Daniel On 14/11/16 10:44, Gholamreza Sabery wrote:I managed to create about 1900 concurrent calls using a single Kamailio and RTPProxy server. But after this number RTPProxy returns 0 and the following error is shown in the Kamailio log files: incorrect port 0 in reply from rtp proxy What is the problem here? Also number of file descriptors that RTPProxy can use are set to a million. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) -sr-users mailing list
sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda
<http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 -_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
-- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda><http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 --- Daniel-Constantin Mierla http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda
<http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 --- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 28-30, 2016 -
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Daniel-Constantin Mierla -
Dragos Oancea -
Gholamreza Sabery