27 Dec
2007
27 Dec
'07
12:14 p.m.
Hi Lazer,
i need a simple config that achieves the following (w/
out a db)
if a user is not registered then all calls should go to a default gw
192.168.10.1
the default gw will only respond w/ a 302 or a 404
if a 302 is received then openser should forward the call on to the
new gw listed in the reply
if a 404 is received the call should be forwarded to a different gw
172.16.20.1
if the send gw is done then the call should die.
Try with somehting like this (not tested):
if (!lookup("location")) {
route(5);
exit;
}
route[5] {
rewritehostport("192.168.10.1:5060");
t_on_failure("1");
route(1);
exit;
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1] {
if (t_check_status("404")) {
rewritehostport("172.16.20.1:5060");
append_branch();
t_relay();
} else {
get_redirects("*");
t_relay();
}
}
Saludos
JesusR.
here is what i was thinking of but as a newbie i may be
off my rocker
i seem to get an error
ERROR: t_check_status: cannot check status for a reply which has no
T-state established
but again my whole approach may be wrong.
if (!lookup("location")) {
rewritehostport ("192.168.10.1:5060");
if (t_check_status("(404)|(480)")) {
log("404 or 480 negative reply\n");
rewritehostport ("172.16.20.1:5060");
}
else{
t_on_failure("1");
t_relay();
}
failure_route[1] {
get_redirects("*");
t_relay();
}
}
Saludos
JesusR.
------------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------------
27 Dec
27 Dec
6:45 p.m.
New subject: [OpenSER-Users] newbie help - handeling 302s and 404s
Hi,
thanx for taking the time to answer my question.
when i try to run openser i get the following errors . how do i debug
them ? this is my first time using version 1.1.x
[root@IPX100 openser]# openser -f openser.cfg
0(9514) loading module /usr/lib/openser/modules/sl.so
0(9514) loading module /usr/lib/openser/modules/tm.so
0(9514) loading module /usr/lib/openser/modules/rr.so
0(9514) loading module /usr/lib/openser/modules/maxfwd.so
0(9514) loading module /usr/lib/openser/modules/usrloc.so
0(9514) loading module /usr/lib/openser/modules/registrar.so
0(9514) loading module /usr/lib/openser/modules/textops.so
0(9514) loading module /usr/lib/openser/modules/uac_redirect.so
0(9514) set_mod_param_regex: usrloc matches module usrloc
0(9514) set_mod_param_regex: found <db_mode> in module usrloc
[/usr/lib/openser/modules/usrloc.so]
0(9514) set_mod_param_regex: rr matches module rr
0(9514) set_mod_param_regex: found <enable_full_lr> in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <mf_process_maxfwd_header>(1) in
module maxfwd [/usr/lib/openser/modules/maxfwd.so]
0(9514) find_cmd_export_t: found <sl_send_reply>(2) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <sl_send_reply>(2) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <record_route>(0) in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <loose_route>(0) in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <append_hf>(1) in module textops
[/usr/lib/openser/modules/textops.so]
0(9514) find_cmd_export_t: found <save>(1) in module registrar
[/usr/lib/openser/modules/registrar.so]
0(9514) find_cmd_export_t: found <lookup>(1) in module registrar
[/usr/lib/openser/modules/registrar.so]
0(9514) parse error (129,6-7): syntax error
0(9514) parse error (129,6-7): missing '(' or ')' ?
0(9514) parse error (129,6-7): bad command: missing ';'?
0(9514) parse error (129,7-8): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) parse error (129,8-9): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) parse error (129,10-11): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) find_cmd_export_t: found <t_on_failure>(1) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <sl_reply_error>(0) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <t_check_status>(1) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <get_redirects>(1) in module
uac_redirect [/usr/lib/openser/modules/uac_redirect.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) parse error (157,1-2): syntax error
0(9514) parse error (157,1-2):
ERROR: bad config file (8 errors)
0(9514) DEBUG: tm_shutdown : start
0(9514) DEBUG: tm_shutdown : emptying hash table
0(9514) DEBUG: tm_shutdown : releasing timers
0(9514) DEBUG: tm_shutdown : removing semaphores
0(9514) DEBUG: tm_shutdown : destroying tmcb lists
0(9514) DEBUG: tm_shutdown : done
0(9514) shm_mem_destroy
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
#route(1);
};
if (uri==myself) {
if (method=="REGISTER") {
save("location");
exit;
};
#this closes the if uri ==
}
if (!lookup("location")) {
route(5);
exit;
};
## ANYTHING ADDED BELOW CAUSE OPENSER TO CRASH ???####
route[5] {
rewritehostport("10.10.10.10:5060");
t_on_failure("1");
route(1);
exit;
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1] {
if (t_check_status("404")) {
rewritehostport("192.168.10.1:5060");
append_branch();
t_relay();
} else {
get_redirects("*");
t_relay();
}
}
#this closes the route
}
On Dec 27, 2007 12:14 PM, Jesus Rodriguez <jesusr(a)voztele.com> wrote:
Hi Lazer,
i need a simple config that achieves the following
(w/ out a db)
if a user is not registered then all calls should go to a default gw
192.168.10.1
the default gw will only respond w/ a 302 or a 404
if a 302 is received then openser should forward the call on to the
new gw listed in the reply
if a 404 is received the call should be forwarded to a different gw
172.16.20.1
if the send gw is done then the call should die.
Try with somehting like this (not tested):
if (!lookup("location")) {
route(5);
exit;
}
route[5] {
rewritehostport("192.168.10.1:5060");
t_on_failure("1");
route(1);
exit;
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1] {
if (t_check_status("404")) {
rewritehostport("172.16.20.1:5060");
append_branch();
t_relay();
} else {
get_redirects("*");
t_relay();
}
}
Saludos
JesusR.
here is what i was thinking of but as a newbie i
may be off my rocker
i seem to get an error
ERROR: t_check_status: cannot check status for a reply which has no
T-state established
but again my whole approach may be wrong.
if (!lookup("location")) {
rewritehostport ("192.168.10.1:5060");
if (t_check_status("(404)|(480)")) {
log("404 or 480 negative reply\n");
rewritehostport ("172.16.20.1:5060");
}
else{
t_on_failure("1");
t_relay();
}
failure_route[1] {
get_redirects("*");
t_relay();
}
}
Saludos
JesusR.
------------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------------
6:49 p.m.
New subject: [OpenSER-Users] newbie help - handeling 302s and 404s
Hi Lazer,
thanx for taking the time to answer my question.
when i try to run openser i get the following errors . how do i debug
them ? this is my first time using version 1.1.x
Try with 1.2.x version.
Regards.
Saludos
JesusR.
[root@IPX100 openser]# openser -f openser.cfg
0(9514) loading module /usr/lib/openser/modules/sl.so
0(9514) loading module /usr/lib/openser/modules/tm.so
0(9514) loading module /usr/lib/openser/modules/rr.so
0(9514) loading module /usr/lib/openser/modules/maxfwd.so
0(9514) loading module /usr/lib/openser/modules/usrloc.so
0(9514) loading module /usr/lib/openser/modules/registrar.so
0(9514) loading module /usr/lib/openser/modules/textops.so
0(9514) loading module /usr/lib/openser/modules/uac_redirect.so
0(9514) set_mod_param_regex: usrloc matches module usrloc
0(9514) set_mod_param_regex: found <db_mode> in module usrloc
[/usr/lib/openser/modules/usrloc.so]
0(9514) set_mod_param_regex: rr matches module rr
0(9514) set_mod_param_regex: found <enable_full_lr> in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <mf_process_maxfwd_header>(1) in
module maxfwd [/usr/lib/openser/modules/maxfwd.so]
0(9514) find_cmd_export_t: found <sl_send_reply>(2) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <sl_send_reply>(2) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <record_route>(0) in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <loose_route>(0) in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <append_hf>(1) in module textops
[/usr/lib/openser/modules/textops.so]
0(9514) find_cmd_export_t: found <save>(1) in module registrar
[/usr/lib/openser/modules/registrar.so]
0(9514) find_cmd_export_t: found <lookup>(1) in module registrar
[/usr/lib/openser/modules/registrar.so]
0(9514) parse error (129,6-7): syntax error
0(9514) parse error (129,6-7): missing '(' or ')' ?
0(9514) parse error (129,6-7): bad command: missing ';'?
0(9514) parse error (129,7-8): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) parse error (129,8-9): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) parse error (129,10-11): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) find_cmd_export_t: found <t_on_failure>(1) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <sl_reply_error>(0) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <t_check_status>(1) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <get_redirects>(1) in module
uac_redirect [/usr/lib/openser/modules/uac_redirect.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) parse error (157,1-2): syntax error
0(9514) parse error (157,1-2):
ERROR: bad config file (8 errors)
0(9514) DEBUG: tm_shutdown : start
0(9514) DEBUG: tm_shutdown : emptying hash table
0(9514) DEBUG: tm_shutdown : releasing timers
0(9514) DEBUG: tm_shutdown : removing semaphores
0(9514) DEBUG: tm_shutdown : destroying tmcb lists
0(9514) DEBUG: tm_shutdown : done
0(9514) shm_mem_destroy
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
#route(1);
};
if (uri==myself) {
if (method=="REGISTER") {
save("location");
exit;
};
#this closes the if uri ==
}
if (!lookup("location")) {
route(5);
exit;
};
## ANYTHING ADDED BELOW CAUSE OPENSER TO CRASH ???####
route[5] {
rewritehostport("10.10.10.10:5060");
t_on_failure("1");
route(1);
exit;
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1] {
if (t_check_status("404")) {
rewritehostport("192.168.10.1:5060");
append_branch();
t_relay();
} else {
get_redirects("*");
t_relay();
}
}
#this closes the route
}
On Dec 27, 2007 12:14 PM, Jesus Rodriguez <jesusr(a)voztele.com> wrote:
Saludos
JesusR.
------------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------------
Hi Lazer,
i need a simple config that achieves the
following (w/ out a db)
if a user is not registered then all calls should go to a default gw
192.168.10.1
the default gw will only respond w/ a 302 or a 404
if a 302 is received then openser should forward the call on to the
new gw listed in the reply
if a 404 is received the call should be forwarded to a different gw
172.16.20.1
if the send gw is done then the call should die.
Try with somehting like this (not tested):
if (!lookup("location")) {
route(5);
exit;
}
route[5] {
rewritehostport("192.168.10.1:5060");
t_on_failure("1");
route(1);
exit;
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1] {
if (t_check_status("404")) {
rewritehostport("172.16.20.1:5060");
append_branch();
t_relay();
} else {
get_redirects("*");
t_relay();
}
}
Saludos
JesusR.
here is what i was thinking of but as a newbie i
may be off my
rocker
i seem to get an error
ERROR: t_check_status: cannot check status for a reply which has no
T-state established
but again my whole approach may be wrong.
if (!lookup("location")) {
rewritehostport ("192.168.10.1:5060");
if (t_check_status("(404)|(480)")) {
log("404 or 480 negative reply\n");
rewritehostport ("172.16.20.1:5060");
}
else{
t_on_failure("1");
t_relay();
}
failure_route[1] {
get_redirects("*");
t_relay();
}
}
Saludos
JesusR.
------------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------------
5 Jan
5 Jan
3:45 a.m.
New subject: [OpenSER-Users] newbie help - handeling 302s and 404s
As per the logs, the error is in the syntax. It mentions missing brackets
somewhere.
Starts from where it says
".. 0(9514) parse error (129,6-7): syntax error
0(9514) parse error (129,6-7): missing '(' or ')' ?
0(9514) parse error (129,6-7): bad command: missing ';'?
0(9514) parse error (129,7-8): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)"
Do as it says - also in 1.1.1 'exit' was replaced by 'break' in some
sections - see changelog. I have had this before.
If I was you, I would go there (really useful tip:- it gives you the line
number/s where the errors occured). Go to the first error and debug
downwards from there. You'd find it's probably the 'exit' in the first
route
function.
Where it says:
if (!lookup("location")) {
route(5);
exit;
};
On 27/12/2007, Lazer Ramm <vchouse(a)gmail.com> wrote:
Hi,
thanx for taking the time to answer my question.
when i try to run openser i get the following errors . how do i debug
them ? this is my first time using version 1.1.x
[root@IPX100 openser]# openser -f openser.cfg
0(9514) loading module /usr/lib/openser/modules/sl.so
0(9514) loading module /usr/lib/openser/modules/tm.so
0(9514) loading module /usr/lib/openser/modules/rr.so
0(9514) loading module /usr/lib/openser/modules/maxfwd.so
0(9514) loading module /usr/lib/openser/modules/usrloc.so
0(9514) loading module /usr/lib/openser/modules/registrar.so
0(9514) loading module /usr/lib/openser/modules/textops.so
0(9514) loading module /usr/lib/openser/modules/uac_redirect.so
0(9514) set_mod_param_regex: usrloc matches module usrloc
0(9514) set_mod_param_regex: found <db_mode> in module usrloc
[/usr/lib/openser/modules/usrloc.so]
0(9514) set_mod_param_regex: rr matches module rr
0(9514) set_mod_param_regex: found <enable_full_lr> in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <mf_process_maxfwd_header>(1) in
module maxfwd [/usr/lib/openser/modules/maxfwd.so]
0(9514) find_cmd_export_t: found <sl_send_reply>(2) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <sl_send_reply>(2) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <record_route>(0) in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <loose_route>(0) in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <append_hf>(1) in module textops
[/usr/lib/openser/modules/textops.so]
0(9514) find_cmd_export_t: found <save>(1) in module registrar
[/usr/lib/openser/modules/registrar.so]
0(9514) find_cmd_export_t: found <lookup>(1) in module registrar
[/usr/lib/openser/modules/registrar.so]
0(9514) parse error (129,6-7): syntax error
0(9514) parse error (129,6-7): missing '(' or ')' ?
0(9514) parse error (129,6-7): bad command: missing ';'?
0(9514) parse error (129,7-8): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) parse error (129,8-9): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) parse error (129,10-11): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) find_cmd_export_t: found <t_on_failure>(1) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <sl_reply_error>(0) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <t_check_status>(1) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <get_redirects>(1) in module
uac_redirect [/usr/lib/openser/modules/uac_redirect.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) parse error (157,1-2): syntax error
0(9514) parse error (157,1-2):
ERROR: bad config file (8 errors)
0(9514) DEBUG: tm_shutdown : start
0(9514) DEBUG: tm_shutdown : emptying hash table
0(9514) DEBUG: tm_shutdown : releasing timers
0(9514) DEBUG: tm_shutdown : removing semaphores
0(9514) DEBUG: tm_shutdown : destroying tmcb lists
0(9514) DEBUG: tm_shutdown : done
0(9514) shm_mem_destroy
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
#route(1);
};
if (uri==myself) {
if (method=="REGISTER") {
save("location");
exit;
};
#this closes the if uri ==
}
if (!lookup("location")) {
route(5);
exit;
};
## ANYTHING ADDED BELOW CAUSE OPENSER TO CRASH ???####
route[5] {
rewritehostport("10.10.10.10:5060");
t_on_failure("1");
route(1);
exit;
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1] {
if (t_check_status("404")) {
rewritehostport("192.168.10.1:5060");
append_branch();
t_relay();
} else {
get_redirects("*");
t_relay();
}
}
#this closes the route
}
On Dec 27, 2007 12:14 PM, Jesus Rodriguez <jesusr(a)voztele.com> wrote:
Hi Lazer,
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
i need a simple config that achieves the following
(w/ out a db)
if a user is not registered then all calls should go to a default gw
192.168.10.1
the default gw will only respond w/ a 302 or a 404
if a 302 is received then openser should forward the call on to the
new gw listed in the reply
if a 404 is received the call should be forwarded to a different gw
172.16.20.1
if the send gw is done then the call should die.
Try with somehting like this (not tested):
if (!lookup("location")) {
route(5);
exit;
}
route[5] {
rewritehostport("192.168.10.1:5060");
t_on_failure("1");
route(1);
exit;
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1] {
if (t_check_status("404")) {
rewritehostport("172.16.20.1:5060");
append_branch();
t_relay();
} else {
get_redirects("*");
t_relay();
}
}
Saludos
JesusR.
here is what i was thinking of but as a newbie i
may be off my rocker
i seem to get an error
ERROR: t_check_status: cannot check status for a reply which has no
T-state established
but again my whole approach may be wrong.
if (!lookup("location")) {
rewritehostport ("192.168.10.1:5060");
if (t_check_status("(404)|(480)")) {
log("404 or 480 negative reply\n");
rewritehostport ("172.16.20.1:5060");
}
else{
t_on_failure("1");
t_relay();
}
failure_route[1] {
get_redirects("*");
t_relay();
}
}
Saludos
JesusR.
------------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------------
3:54 a.m.
New subject: [OpenSER-Users] newbie help - handeling 302s and 404s
Or rather (as you've pointed out yourself), from
*## ANYTHING ADDED BELOW CAUSE OPENSER TO CRASH ???####
route[5] {
rewritehostport("**10.10.10.10:5060 *
<http://10.10.10.10:5060/>*");
* * t_on_failure("1");
route(1);
exit;
}*
If you follow the logic, looks to me like it's 'exit-ting' twice. First call
jumps to route[5], then within route[5] you've also callled the
*route[1]* sub-routine
- which also contains an 'exit', so from within *route[1]* it never returns
to *route[5]* as you've intended.
On 05/01/2008, Max Gregorian <gregorian442(a)googlemail.com> wrote:
As per the logs, the error is in the syntax. It mentions missing brackets
somewhere.
Starts from where it says
".. 0(9514) parse error (129,6-7): syntax error
0(9514) parse error (129,6-7): missing '(' or ')' ?
0(9514) parse error (129,6-7): bad command: missing ';'?
0(9514) parse error (129,7-8): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)"
Do as it says - also in 1.1.1 'exit' was replaced by 'break' in some
sections - see changelog. I have had this before.
If I was you, I would go there (really useful tip:- it gives you the line
number/s where the errors occured). Go to the first error and debug
downwards from there. You'd find it's probably the 'exit' in the first
route
function.
Where it says:
if (!lookup("location")) {
route(5);
exit;
};
On 27/12/2007, Lazer Ramm <vchouse(a)gmail.com> wrote:
Hi,
thanx for taking the time to answer my question.
when i try to run openser i get the following errors . how do i debug
them ? this is my first time using version 1.1.x
[root@IPX100 openser]# openser -f openser.cfg
0(9514) loading module /usr/lib/openser/modules/sl.so
0(9514) loading module /usr/lib/openser/modules/tm.so
0(9514) loading module /usr/lib/openser/modules/rr.so
0(9514) loading module /usr/lib/openser/modules/maxfwd.so
0(9514) loading module /usr/lib/openser/modules/usrloc.so
0(9514) loading module /usr/lib/openser/modules/registrar.so
0(9514) loading module /usr/lib/openser/modules/textops.so
0(9514) loading module /usr/lib/openser/modules/uac_redirect.so
0(9514) set_mod_param_regex: usrloc matches module usrloc
0(9514) set_mod_param_regex: found <db_mode> in module usrloc
[/usr/lib/openser/modules/usrloc.so]
0(9514) set_mod_param_regex: rr matches module rr
0(9514) set_mod_param_regex: found <enable_full_lr> in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <mf_process_maxfwd_header>(1) in
module maxfwd [/usr/lib/openser/modules/maxfwd.so]
0(9514) find_cmd_export_t: found <sl_send_reply>(2) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <sl_send_reply>(2) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <record_route>(0) in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <loose_route>(0) in module rr
[/usr/lib/openser/modules/rr.so]
0(9514) find_cmd_export_t: found <append_hf>(1) in module textops
[/usr/lib/openser/modules/textops.so]
0(9514) find_cmd_export_t: found <save>(1) in module registrar
[/usr/lib/openser/modules/registrar.so]
0(9514) find_cmd_export_t: found <lookup>(1) in module registrar
[/usr/lib/openser/modules/registrar.so]
0(9514) parse error (129,6-7): syntax error
0(9514) parse error (129,6-7): missing '(' or ')' ?
0(9514) parse error (129,6-7): bad command: missing ';'?
0(9514) parse error (129,7-8): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) parse error (129,8-9): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) parse error (129,10-11): bad command (!!!attention: from
v1.0.0+ use 'return' instead of 'break'!!!)
0(9514) find_cmd_export_t: found <t_on_failure>(1) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <sl_reply_error>(0) in module sl
[/usr/lib/openser/modules/sl.so]
0(9514) find_cmd_export_t: found <t_check_status>(1) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) find_cmd_export_t: found <get_redirects>(1) in module
uac_redirect [/usr/lib/openser/modules/uac_redirect.so]
0(9514) find_cmd_export_t: found <t_relay>(0) in module tm
[/usr/lib/openser/modules/tm.so]
0(9514) parse error (157,1-2): syntax error
0(9514) parse error (157,1-2):
ERROR: bad config file (8 errors)
0(9514) DEBUG: tm_shutdown : start
0(9514) DEBUG: tm_shutdown : emptying hash table
0(9514) DEBUG: tm_shutdown : releasing timers
0(9514) DEBUG: tm_shutdown : removing semaphores
0(9514) DEBUG: tm_shutdown : destroying tmcb lists
0(9514) DEBUG: tm_shutdown : done
0(9514) shm_mem_destroy
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
#route(1);
};
if (uri==myself) {
if (method=="REGISTER") {
save("location");
exit;
};
#this closes the if uri ==
}
if (!lookup("location")) {
route(5);
exit;
};
## ANYTHING ADDED BELOW CAUSE OPENSER TO CRASH ???####
route[5] {
rewritehostport("10.10.10.10:5060");
t_on_failure("1");
route(1);
exit;
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1] {
if (t_check_status("404")) {
rewritehostport(" 192.168.10.1:5060");
append_branch();
t_relay();
} else {
get_redirects("*");
t_relay();
}
}
#this closes the route
}
On Dec 27, 2007 12:14 PM, Jesus Rodriguez < jesusr(a)voztele.com> wrote:
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
Hi Lazer,
rocker
i need a simple config that achieves the following
(w/ out a db)
if a user is not registered then all calls should go to a default gw
192.168.10.1
the default gw will only respond w/ a 302 or a 404
if a 302 is received then openser should forward the call on to the
new gw listed in the reply
if a 404 is received the call should be forwarded to a different gw
172.16.20.1
if the send gw is done then the call should die.
Try with somehting like this (not tested):
if (!lookup("location")) {
route(5);
exit;
}
route[5] {
rewritehostport("192.168.10.1:5060 ");
t_on_failure("1");
route(1);
exit;
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1] {
if (t_check_status("404")) {
rewritehostport(" 172.16.20.1:5060");
append_branch();
t_relay();
} else {
get_redirects("*");
t_relay();
}
}
Saludos
JesusR.
>here is what i was thinking of but as a newbie i may be off my >i seem to get an error
>
> ERROR: t_check_status: cannot check status for a reply which has no
T-state
established
but again my whole approach may be wrong.
if (!lookup("location")) {
rewritehostport (" 192.168.10.1:5060");
if (t_check_status("(404)|(480)")) {
log("404 or 480 negative reply\n");
rewritehostport (" 172.16.20.1:5060");
}
else{
t_on_failure("1");
t_relay();
}
failure_route[1] {
get_redirects("*");
t_relay();
}
}
Saludos
JesusR.
------------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------------
6196
days inactive
6205
days old
4 comments
3 participants
participants (3)
-
Jesus Rodriguez -
Lazer Ramm -
Max Gregorian