Hi guys
I'm new to OpenSER so I used a article to install and configure it, I was able to connect to it from my lan, but it never works from my public IP. This is the tutorila I used: http://www.oldskoolphreak.com/tfiles/voip/beginners_openser.txt I forwarded port 5060 to the server but its no use. I also tried this on two diffrent ISPs with the same result. Is there anything that I need to change in the configuration to make it accept connections from a public IP?
On 8/18/07, Arya arya6000@gmail.com wrote:
Hi guys
I'm new to OpenSER so I used a article to install and configure it, I was able to connect to it from my lan, but it never works from my public IP. This is the tutorila I used: http://www.oldskoolphreak.com/tfiles/voip/beginners_openser.txt I forwarded port 5060 to the server but its no use. I also tried this on two diffrent ISPs with the same result. Is there anything that I need to change in the configuration to make it accept connections from a public IP?
Hi
suggest you to post your config
and
use ngrep to capture the network trace
ram
-
Arya -
ram