24 Apr
2008
24 Apr
'08
3:07 a.m.
---------- Forwarded message ----------
From: Marcio <mrgalhan(a)gmail.com>
Date: 23/04/2008 21:06
Subject: Re: [OpenSER-Users] Install Perl Module
To: Mik Cheez <michael_bulk(a)wildgate.com>
Thanks Mik....
Actually....I had not tried....was following the step-by-step module
Perl....
But you don't set environment vars? PERLLDOPTS:, PERLCCOPTS: and
TYPEMAP:....
Marcio
2008/4/23, Mik Cheez <michael_bulk(a)wildgate.com>om>:
All I've ever had to do is add the following in 'Makefile':
include_modules?= perl
I also take out the 'perl' entry from 'exclude_modules?= ...'
Will that work, or is that part of what you've been doing?
Mik
Marcio wrote:
Hi...
Anybody could me help, to install perl module as is explained in 1.2
item of the variables enviroments would have put the output this
cmds....into " Makefile.deps -> CROSS_COMPILE ?=" <output cmd
"perl
-MExtUtils::Embed -e ldopts">, <"perl -MExtUtils::Embed -e
ccopts"> and
<"echo "`perl -MConfig -e 'print
$Config{installprivlib}'`/ExtUtils/typemap"> ???
or just put the output of these cmds into environments variables :
PERLLDOPTS:, PERLCCOPTS: and TYPEMAP: and run the Makefile.....???
Does anyone know how...?
Any hints.....??
thx...
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
24 Apr
24 Apr
5:17 p.m.
You shouldn't have to worry about setting the environment variables
unless you're going to distribute the binary. As long as you have perl
installed, you should be fine with just making the change in your Makefile.
Marcio wrote:
---------- Forwarded message ----------
From: *Marcio* <mrgalhan(a)gmail.com <mailto:mrgalhan@gmail.com>>
Date: 23/04/2008 21:06
Subject: Re: [OpenSER-Users] Install Perl Module
To: Mik Cheez <michael_bulk(a)wildgate.com <mailto:michael_bulk@wildgate.com>>
Thanks Mik....
Actually....I had not tried....was following the step-by-step module
Perl....
But you don't set environment vars? PERLLDOPTS:, PERLCCOPTS: and
TYPEMAP:....
Marcio
2008/4/23, Mik Cheez <michael_bulk(a)wildgate.com
<mailto:michael_bulk@wildgate.com>>:
All I've ever had to do is add the following in 'Makefile':
include_modules?= perl
I also take out the 'perl' entry from 'exclude_modules?= ...'
Will that work, or is that part of what you've been doing?
Mik
Marcio wrote:
Hi...
Anybody could me help, to install perl module as is explained
in 1.2 item of the variables enviroments would have put the
output this cmds....into " Makefile.deps -> CROSS_COMPILE ?="
<output cmd "perl -MExtUtils::Embed -e ldopts">, <"perl
-MExtUtils::Embed -e ccopts"> and <"echo "`perl -MConfig -e
'print $Config{installprivlib}'`/ExtUtils/typemap"> ???
or just put the output of these cmds into environments
variables : PERLLDOPTS:, PERLCCOPTS: and TYPEMAP: and run the
Makefile.....???
Does anyone know how...?
Any hints.....??
thx...
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
9:02 p.m.
New subject: [OpenSER-Users] Fwd: Install Perl Module
Well, I think has that something wrong here....because...when I initialized
the Openser, after updates into Makefile (include_modules?= perl and take
out 'perl' entry of the exclude_modules?= ).....compiled ( make all ) and
installed ( make install )....no probs...but checked the following errors :
INFO: perl:mod_init: initializing...
ERROR: perl:mod_init: insufficient module parameters. Module not
loaded.
ERROR: core: init_mod: failed to initialize module perl
ERROR: core:main: error while initializing modules
I have no idea of what....
Did you already saw this happen?
thx,
Marcio
2008/4/24, Mik Cheez <michael_bulk(a)wildgate.com>om>:
You shouldn't have to worry about setting the environment variables unless
you're going to distribute the binary. As long as you have perl installed,
you should be fine with just making the change in your Makefile.
Marcio wrote:
---------- Forwarded message ----------
From: *Marcio* <mrgalhan(a)gmail.com <mailto:mrgalhan@gmail.com>>
Date: 23/04/2008 21:06
Subject: Re: [OpenSER-Users] Install Perl Module
To: Mik Cheez <michael_bulk(a)wildgate.com <mailto:
michael_bulk(a)wildgate.com>>
Thanks Mik....
Actually....I had not tried....was following the step-by-step module
Perl....
But you don't set environment vars? PERLLDOPTS:, PERLCCOPTS: and
TYPEMAP:....
Marcio
2008/4/23, Mik Cheez <michael_bulk(a)wildgate.com <mailto:
michael_bulk(a)wildgate.com>>t;>:
All I've ever had to do is add the following in 'Makefile':
include_modules?= perl
I also take out the 'perl' entry from 'exclude_modules?= ...'
Will that work, or is that part of what you've been doing?
Mik
Marcio wrote:
Hi...
Anybody could me help, to install perl module as is explained
in 1.2 item of the variables enviroments would have put the
output this cmds....into " Makefile.deps -> CROSS_COMPILE ?="
<output cmd "perl -MExtUtils::Embed -e ldopts">, <"perl
-MExtUtils::Embed -e ccopts"> and <"echo "`perl -MConfig -e
'print $Config{installprivlib}'`/ExtUtils/typemap"> ???
or just put the output of these cmds into environments
variables : PERLLDOPTS:, PERLCCOPTS: and TYPEMAP: and run the
Makefile.....???
Does anyone know how...?
Any hints.....??
thx...
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
25 Apr
25 Apr
4:54 p.m.
New subject: [OpenSER-Users] Fwd: Install Perl Module
Hi,
On Thursday 24 April 2008, Marcio wrote:
Well, I think has that something wrong
here....because...when I initialized
the Openser, after updates into Makefile (include_modules?= perl and take
out 'perl' entry of the exclude_modules?= ).....compiled ( make all ) and
installed ( make install )....no probs...but checked the following errors :
INFO: perl:mod_init: initializing...
ERROR: perl:mod_init: insufficient module parameters. Module not
loaded.
The error messages tell you what to do: supply all required module parameters.
These are described in the README:
==============================================================
1.5. Exported Parameters
1.5.1. filename (string)
This is the file name of your script. This may be set once
only, but it may include an arbitary number of functions and
"use" as many Perl module as necessary.
May not be empty!
==============================================================
I.e., in your config file, enter a line like this:
modparam("perl", "filename", "/path/to/your/perl/script")
Good luck,
Bastian
--
Collax GmbH . Burkheimer Straße 3 . 79111 Freiburg . Germany
p: +49 (0) 761-45684-24
f: +49 (0) 761-45684-10 www.collax.com
Geschäftsführer: William K. Hite / Boris Nalbach
AG München HRB 158898 . Ust.-IdNr: DE 814464942
\ This mind intentionally left blank.
6061
days inactive
6062
days old
3 comments
3 participants
participants (3)
-
Bastian Friedrich -
Marcio -
Mik Cheez