14 Sep
2018
14 Sep
'18
9:34 a.m.
Hello dears,
I'm using kamailio devel version as an IMS (P-CSCF,S-CSCC,I-CSCF) with forking mode
,when more than one client registered with the same AOR and the servers received a call to
that Aor All the clients ringing , after that one of the clients answer the call which
will cause cancel message with reason call completed elsewhere .
This cancel message affect on the running call which answered by one of the client and
terminate it .
So how to set up kamailio to allow registration only for one client per Aor or to prevent
the affection of this cancel messages .
Thanks in advance & best regards
14 Sep
14 Sep
9:44 a.m.
https://kamailio.org/docs/modules/5.1.x/modules/registrar.html#registrar.p.…
On Fri, Sep 14, 2018 at 9:35 AM eyas barhouk <eyas37(a)hotmail.com> wrote:
Hello dears,
I'm using kamailio devel version as an IMS (P-CSCF,S-CSCC,I-CSCF) with
forking mode ,when more than one client registered with the same AOR and
the servers received a call to that Aor All the clients ringing , after
that one of the clients answer the call which will cause cancel message
with reason call completed elsewhere .
This cancel message affect on the running call which answered by one of
the client and terminate it .
So how to set up kamailio to allow registration only for one client per
Aor or to prevent the affection of this cancel messages .
Thanks in advance & best regards
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
10:03 a.m.
Dear thanks for your response
I'm using kamilio ims_registrar-scscf module Instead of register module
So is the parameter max_contacts on thats module do the same ??
________________________________
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Sergiu Pojoga
<pojogas(a)gmail.com>
Sent: Friday, September 14, 2018 4:44:24 PM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Allow registration only for one client per AOR
https://kamailio.org/docs/modules/5.1.x/modules/registrar.html#registrar.p.…
On Fri, Sep 14, 2018 at 9:35 AM eyas barhouk
<eyas37@hotmail.com<mailto:eyas37@hotmail.com>> wrote:
Hello dears,
I'm using kamailio devel version as an IMS (P-CSCF,S-CSCC,I-CSCF) with forking mode
,when more than one client registered with the same AOR and the servers received a call to
that Aor All the clients ringing , after that one of the clients answer the call which
will cause cancel message with reason call completed elsewhere .
This cancel message affect on the running call which answered by one of the client and
terminate it .
So how to set up kamailio to allow registration only for one client per Aor or to prevent
the affection of this cancel messages .
Thanks in advance & best regards
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
4:32 p.m.
Am Freitag, 14. September 2018, 16:03:33 CEST schrieb eyas barhouk:
Dear thanks for your response
I'm using kamilio ims_registrar-scscf module Instead of register module
So is the parameter max_contacts on thats module do the same ??
Hello,
it seems it does. I am not an expert for this IMS modules. It seems that the
storage for the registrar is also the ims_usrloc_scscf module. But maybe
somebody which uses this modules can comment on that too.
This module unfortunately has no documentation, I will open a github issue for
it. It seems that the parameter is named "maxcontact". There is another
parameter "maxcontact_behaviour", set to 1 it will reject the contact, set to
2 it will replace the oldest.
Best regards,
Henning
--
Henning Westerholt
https://skalatan.de/blog/
15 Sep
15 Sep
3:17 a.m.
Hi, Mybe it is better to add some policy in kamailio config file to do it.
As you could see in kamailio.cfg,
if (!impu_registered("location")) {
xlog("L_ERR", "Not REGISTERED\n");
save("PRE_REG_SAR_REPLY","location");
exit;
} else {
isc_match_filter_reg("1","location");
save("REG_SAR_REPLY","location");
exit;
}
If the IMPU is registered or not, the save function is executed, You
could add your favourite policy here,
WIth Regards.Mojtaba
On Sat, Sep 15, 2018 at 1:02 AM Henning Westerholt <hw(a)kamailio.org> wrote:
Am Freitag, 14. September 2018, 16:03:33 CEST schrieb eyas barhouk:
--
--Mojtaba Esfandiari.S
Dear thanks for your response
I'm using kamilio ims_registrar-scscf module Instead of register module
So is the parameter max_contacts on thats module do the same ??
Hello,
it seems it does. I am not an expert for this IMS modules. It seems that the
storage for the registrar is also the ims_usrloc_scscf module. But maybe
somebody which uses this modules can comment on that too.
This module unfortunately has no documentation, I will open a github issue for
it. It seems that the parameter is named "maxcontact". There is another
parameter "maxcontact_behaviour", set to 1 it will reject the contact, set to
2 it will replace the oldest.
Best regards,
Henning
--
Henning Westerholt
https://skalatan.de/blog/
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
11:19 a.m.
Thanks dears for your kind response
But after testing the both ways (modifying the parameters and the configuration),
I still have the same issue , the s-cscf generate a Cancel message with reason : call
completed elsewhere after receiving the 200 ok message and then transmit it to the proxy
wich affect on the RTPengine and terminate the call .
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Mojtaba
<mespio(a)gmail.com>
Sent: Saturday, September 15, 2018 7:17:39 AM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Allow registration only for one client per AOR
Hi, Mybe it is better to add some policy in kamailio config file to do it.
As you could see in kamailio.cfg,
if (!impu_registered("location")) {
xlog("L_ERR", "Not REGISTERED\n");
save("PRE_REG_SAR_REPLY","location");
exit;
} else {
isc_match_filter_reg("1","location");
save("REG_SAR_REPLY","location");
exit;
}
If the IMPU is registered or not, the save function is executed, You
could add your favourite policy here,
WIth Regards.Mojtaba
On Sat, Sep 15, 2018 at 1:02 AM Henning Westerholt <hw(a)kamailio.org> wrote:
Am Freitag, 14. September 2018, 16:03:33 CEST schrieb eyas barhouk:
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Dear thanks for your response
I'm using kamilio ims_registrar-scscf module Instead of register module
So is the parameter max_contacts on thats module do the same ??
Hello,
it seems it does. I am not an expert for this IMS modules. It seems that the
storage for the registrar is also the ims_usrloc_scscf module. But maybe
somebody which uses this modules can comment on that too.
This module unfortunately has no documentation, I will open a github issue for
it. It seems that the parameter is named "maxcontact". There is another
parameter "maxcontact_behaviour", set to 1 it will reject the contact, set to
2 it will replace the oldest.
Best regards,
Henning
--
Henning Westerholt
https://skalatan.de/blog/
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2161
days inactive
2162
days old
5 comments
4 participants
participants (4)
-
eyas barhouk -
Henning Westerholt -
Mojtaba -
Sergiu Pojoga