3 Jun
2020
3 Jun
'20
2:44 a.m.
Hi;
I'm using the received parameter to send a MESSAGE to unregsiter the first
user that is registered to register the second one.
Using:
*modparam("usrloc", "received_column"*
*modparam("registrar|nathelper", "received_avp",*
and when I do a:
select received from location;
as you can see is null.
+----------+
| received |
+----------+
| NULL |
+----------+
In IPV4 is working fine, but in IPV6 is not. Can you tell me how can I get
this value?
Im going crazy with that.
reg_fetch_contacts("location", "$fu",
"existingContact");
if( $(ulc(existingContact=>user_agent)[0]) =~ "SPI/v"){
$var(oldDeviceId) =
$(ulc(existingContact=>callid)[0]{s.substr,9,0});
$var(newDeviceId) = $(hdr(Call-ID){s.substr,9,0});
if($var(oldDeviceId) != $var(newDeviceId) ){
xlog("L_INFO","New device id is
different:warn previous user another user overide him");
$var(address) = $(ulc(existingContact=>
*received*)[0]);
$var(ruri) = $(var(address){s.substr,4,0});
#Send a SIP Request signalling the problem
and its reason on the body
$uac_req(method)="MESSAGE";
$uac_req(ruri) = "sip:"+ $au + "@" +
$var(ruri);
$uac_req(furi) = "sip:kamailio@sip_domain";
$uac_req(turi) = $fu;
$uac_req(hdrs)="Max-Forwards: 70\r\nEvent:
reg\r\nContent-Type:
text/plain\r\nAccept-Contact:*;+g.ext.app.registration\r\n";
$uac_req(body)="Already registered with
another device id";
uac_req_send();
drop;
}
}
Thank you.
3 Jun
3 Jun
6:41 a.m.
Not exactly an answer to your specific question, but it might help solve
your problem in a different way...
If you using the registrar module with save()... you might be able to take
advantage in some way of the flags 0x04:
https://kamailio.org/docs/modules/5.3.x/modules/registrar.html#registrar.f.…
*"0x04 - store and maintain one contact per AoR. If there are other contact
addresses for AoR not matching current registration, remove them. This mode
ensures one contact per AoR (user)."*
Regarding "received", I would think that you have it on IPV4 because the UA
is probably behind NAT, and you are adding it in config script, with IPv6,
there is no NAT, and --most likely-- you are not adding it, thus it's not
saved to the database. Check if you are using fix_nated_register()
somewhere in your config file.. For IPv6 it might be easier if you just
pull the IP from the Contact info.
Sorry if this isn't very helpful, I'm guessing a little based on the info
you provided :)
Cheers,
Joel.
On Tue, Jun 2, 2020 at 4:46 PM Ahmed Marsou <amarsou1988(a)gmail.com> wrote:
Hi;
I'm using the received parameter to send a MESSAGE to unregsiter the first
user that is registered to register the second one.
Using:
*modparam("usrloc", "received_column"*
*modparam("registrar|nathelper", "received_avp",*
and when I do a:
select received from location;
as you can see is null.
+----------+
| received |
+----------+
| NULL |
+----------+
In IPV4 is working fine, but in IPV6 is not. Can you tell me how can I get
this value?
Im going crazy with that.
reg_fetch_contacts("location", "$fu",
"existingContact");
if( $(ulc(existingContact=>user_agent)[0]) =~ "SPI/v"){
$var(oldDeviceId) =
$(ulc(existingContact=>callid)[0]{s.substr,9,0});
$var(newDeviceId) = $(hdr(Call-ID){s.substr,9,0});
if($var(oldDeviceId) != $var(newDeviceId) ){
xlog("L_INFO","New device id is
different:warn previous user another user overide him");
$var(address) = $(ulc(existingContact=>
*received*)[0]);
$var(ruri) = $(var(address){s.substr,4,0});
#Send a SIP Request signalling the problem
and its reason on the body
$uac_req(method)="MESSAGE";
$uac_req(ruri) = "sip:"+ $au + "@" +
$var(ruri);
$uac_req(furi) = "sip:kamailio@sip_domain
";
$uac_req(turi) = $fu;
$uac_req(hdrs)="Max-Forwards: 70\r\nEvent:
reg\r\nContent-Type:
text/plain\r\nAccept-Contact:*;+g.ext.app.registration\r\n";
$uac_req(body)="Already registered with
another device id";
uac_req_send();
drop;
}
}
Thank you.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1:27 p.m.
Hi, thanks for your response. I appreciate the help, I really appreciate
it.
My problem is that I have to send a MESSAGE to an application to show the
user a message.
Like that:
*$ var (address) = $ (ulc (existingContact => received) [0]);$ var (ruri) =
$ (var (address) {s.substr, 4,0});# Submit a SIP request stating the
problem and its reason in the body$ uac_req (method) = "MESSAGE";$ uac_req
(ruri) = "sip:" + $ au + "@" + $ var (ruri);$ uac_req (furi) =
"sip:
kamailio @ sip_domain";$ uac_req (turi) = $ fu;$ uac_req (hdrs) =
"Max-Forwards: 70 \ r \ nEvent: reg \ r \ nContent-Type: text / plain \ r \
nAccept-Contact: *; + g.ext.app.registration \ r \ n" ;$ uac_req (body) =
"Already registered with another device ID";uac_req_send ();*
For the previous user, I mean. The first record, not the second. How can I
get the first source IP address to replace $ var (address) = $ (ulc
(existingContact => received) [0]); and send him the message? If I use save
(); module, I will have the same problem, because I will not be able to
find the previous IP source.
Thank you so much.
Kind regards.
El mié., 3 jun. 2020 5:43, Joel Serrano <joel(a)textplus.com> escribió:
Not exactly an answer to your specific question, but
it might help solve
your problem in a different way...
If you using the registrar module with save()... you might be able to take
advantage in some way of the flags 0x04:
https://kamailio.org/docs/modules/5.3.x/modules/registrar.html#registrar.f.…
*"0x04 - store and maintain one contact per AoR. If there are other
contact addresses for AoR not matching current registration, remove them.
This mode ensures one contact per AoR (user)."*
Regarding "received", I would think that you have it on IPV4 because the
UA is probably behind NAT, and you are adding it in config script, with
IPv6, there is no NAT, and --most likely-- you are not adding it, thus it's
not saved to the database. Check if you are using fix_nated_register()
somewhere in your config file.. For IPv6 it might be easier if you just
pull the IP from the Contact info.
Sorry if this isn't very helpful, I'm guessing a little based on the info
you provided :)
Cheers,
Joel.
On Tue, Jun 2, 2020 at 4:46 PM Ahmed Marsou <amarsou1988(a)gmail.com> wrote:
Hi;
I'm using the received parameter to send a MESSAGE to unregsiter the
first user that is registered to register the second one.
Using:
*modparam("usrloc", "received_column"*
*modparam("registrar|nathelper", "received_avp",*
and when I do a:
select received from location;
as you can see is null.
+----------+
| received |
+----------+
| NULL |
+----------+
In IPV4 is working fine, but in IPV6 is not. Can you tell me how can I
get this value?
Im going crazy with that.
reg_fetch_contacts("location", "$fu",
"existingContact");
if( $(ulc(existingContact=>user_agent)[0]) =~ "SPI/v"){
$var(oldDeviceId) =
$(ulc(existingContact=>callid)[0]{s.substr,9,0});
$var(newDeviceId) = $(hdr(Call-ID){s.substr,9,0});
if($var(oldDeviceId) != $var(newDeviceId) ){
xlog("L_INFO","New device id is
different:warn previous user another user overide him");
$var(address) = $(ulc(existingContact=>
*received*)[0]);
$var(ruri) =
$(var(address){s.substr,4,0});
#Send a SIP Request signalling the
problem and its reason on the body
$uac_req(method)="MESSAGE";
$uac_req(ruri) = "sip:"+ $au + "@" +
$var(ruri);
$uac_req(furi) = "sip:kamailio@sip_domain
";
$uac_req(turi) = $fu;
$uac_req(hdrs)="Max-Forwards:
70\r\nEvent: reg\r\nContent-Type:
text/plain\r\nAccept-Contact:*;+g.ext.app.registration\r\n";
$uac_req(body)="Already registered with
another device id";
uac_req_send();
drop;
}
}
Thank you.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1:54 p.m.
Hello,
like Joel said, the reveiced filed in location record is set only for
NATed contacts and in ipv6 likely it is not the case.
What you should do is like:
$uac_req(ruri) = $(ulc (existingContact=>addr)[0]);
if($(ulc(existingContact=>received)[0]) != $null) {
$uac_req(duri) = $(ulc(existingContact=>received)[0]);
}
Cheers,
Daniel
On 03.06.20 12:27, Ahmed Marsou wrote:
Hi, thanks for your response. I appreciate the help, I
really
appreciate it.
My problem is that I have to send a MESSAGE to an application to show
the user a message.
Like that:
*$ var (address) = $ (ulc (existingContact => received) [0]);
$ var (ruri) = $ (var (address) {s.substr, 4,0});
# Submit a SIP request stating the problem and its reason in the body
$ uac_req (method) = "MESSAGE";
$ uac_req (ruri) = "sip:" + $ au + "@" + $ var (ruri);
$ uac_req (furi) = "sip: kamailio @ sip_domain";
$ uac_req (turi) = $ fu;
$ uac_req (hdrs) = "Max-Forwards: 70 \ r \ nEvent: reg \ r \
nContent-Type: text / plain \ r \ nAccept-Contact: *; +
g.ext.app.registration \ r \ n" ;
$ uac_req (body) = "Already registered with another device ID";
uac_req_send ();*
For the previous user, I mean. The first record, not the second. How
can I get the first source IP address to replace $ var (address) = $
(ulc (existingContact => received) [0]); and send him the message? If
I use save (); module, I will have the same problem, because I will
not be able to find the previous IP source.
Thank you so much.
Kind regards.
El mié., 3 jun. 2020 5:43, Joel Serrano <joel(a)textplus.com
<mailto:joel@textplus.com>> escribió:
Not exactly an answer to your specific question, but it might help
solve your problem in a different way...
If you using the registrar module with save()... you might be able
to take advantage in some way of the flags 0x04:
https://kamailio.org/docs/modules/5.3.x/modules/registrar.html#registrar.f.…
/"0x04 - store and maintain one contact per AoR. If there are
other contact addresses for AoR not matching current registration,
remove them. This mode ensures one contact per AoR (user)."
/
Regarding "received", I would think that you have it on IPV4
because the UA is probably behind NAT, and you are adding it in
config script, with IPv6, there is no NAT, and --most likely-- you
are not adding it, thus it's not saved to the database. Check if
you are using fix_nated_register() somewhere in your config file..
For IPv6 it might be easier if you just pull the IP from the
Contact info.
Sorry if this isn't very helpful, I'm guessing a little based on
the info you provided :)
Cheers,
Joel.
On Tue, Jun 2, 2020 at 4:46 PM Ahmed Marsou <amarsou1988(a)gmail.com
<mailto:amarsou1988@gmail.com>> wrote:
Hi;
I'm using the received parameter to send a MESSAGE to
unregsiter the first user that is registered to register the
second one.
Using:
*modparam("usrloc", "received_column"*
*modparam("registrar|nathelper", "received_avp",
*
*
*
and when I do a:
select received from location;
as you can see is null.
+----------+
| received |
+----------+
| NULL |
+----------+
In IPV4 is working fine, but in IPV6 is not. Can you tell me
how can I get this value?
Im going crazy with that.
reg_fetch_contacts("location", "$fu",
"existingContact");
if( $(ulc(existingContact=>user_agent)[0]) =~
"SPI/v"){
$var(oldDeviceId) =
$(ulc(existingContact=>callid)[0]{s.substr,9,0});
$var(newDeviceId) =
$(hdr(Call-ID){s.substr,9,0});
if($var(oldDeviceId) !=
$var(newDeviceId) ){
xlog("L_INFO","New device id
is different:warn previous user another user overide him");
$var(address) =
$(ulc(existingContact=>*received*)[0]);
$var(ruri) =
$(var(address){s.substr,4,0});
#Send a SIP Request signalling
the problem and its reason on the body
$uac_req(method)="MESSAGE";
$uac_req(ruri) = "sip:"+ $au +
"@" + $var(ruri);
$uac_req(furi) =
"sip:kamailio@sip_domain";
$uac_req(turi) = $fu;
$uac_req(hdrs)="Max-Forwards:
70\r\nEvent: reg\r\nContent-Type:
text/plain\r\nAccept-Contact:*;+g.ext.app.registration\r\n";
$uac_req(body)="Already
registered with another device id";
uac_req_send();
drop;
}
}
Thank you.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
2:13 p.m.
Ok, thank you so much.
El mié., 3 jun. 2020 a las 12:54, Daniel-Constantin Mierla (<
miconda(a)gmail.com>) escribió:
Hello,
like Joel said, the reveiced filed in location record is set only for
NATed contacts and in ipv6 likely it is not the case.
What you should do is like:
$uac_req(ruri) = $(ulc (existingContact=>addr)[0]);
if($(ulc(existingContact=>received)[0]) != $null) {
$uac_req(duri) = $(ulc(existingContact=>received)[0]);
}
Cheers,
Daniel
On 03.06.20 12:27, Ahmed Marsou wrote:
Hi, thanks for your response. I appreciate the help, I really appreciate
it.
My problem is that I have to send a MESSAGE to an application to show the
user a message.
Like that:
*$ var (address) = $ (ulc (existingContact => received) [0]); $ var (ruri)
= $ (var (address) {s.substr, 4,0}); # Submit a SIP request stating the
problem and its reason in the body $ uac_req (method) = "MESSAGE"; $
uac_req (ruri) = "sip:" + $ au + "@" + $ var (ruri); $ uac_req (furi)
=
"sip: kamailio @ sip_domain"; $ uac_req (turi) = $ fu; $ uac_req (hdrs) =
"Max-Forwards: 70 \ r \ nEvent: reg \ r \ nContent-Type: text / plain \ r \
nAccept-Contact: *; + g.ext.app.registration \ r \ n" ; $ uac_req (body) =
"Already registered with another device ID"; uac_req_send ();*
For the previous user, I mean. The first record, not the second. How can I
get the first source IP address to replace $ var (address) = $ (ulc
(existingContact => received) [0]); and send him the message? If I use save
(); module, I will have the same problem, because I will not be able to
find the previous IP source.
Thank you so much.
Kind regards.
El mié., 3 jun. 2020 5:43, Joel Serrano <joel(a)textplus.com> escribió:
Not exactly an answer to your specific question,
but it might help solve
your problem in a different way...
If you using the registrar module with save()... you might be able to
take advantage in some way of the flags 0x04:
https://kamailio.org/docs/modules/5.3.x/modules/registrar.html#registrar.f.…
*"0x04 - store and maintain one contact per AoR. If there are other
contact addresses for AoR not matching current registration, remove them.
This mode ensures one contact per AoR (user)." *
Regarding "received", I would think that you have it on IPV4 because the
UA is probably behind NAT, and you are adding it in config script, with
IPv6, there is no NAT, and --most likely-- you are not adding it, thus it's
not saved to the database. Check if you are using fix_nated_register()
somewhere in your config file.. For IPv6 it might be easier if you just
pull the IP from the Contact info.
Sorry if this isn't very helpful, I'm guessing a little based on the info
you provided :)
Cheers,
Joel.
On Tue, Jun 2, 2020 at 4:46 PM Ahmed Marsou <amarsou1988(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
Hi;
I'm using the received parameter to send a MESSAGE to unregsiter the
first user that is registered to register the second one.
Using:
*modparam("usrloc", "received_column"*
*modparam("registrar|nathelper", "received_avp", *
and when I do a:
select received from location;
as you can see is null.
+----------+
| received |
+----------+
| NULL |
+----------+
In IPV4 is working fine, but in IPV6 is not. Can you tell me how can I
get this value?
Im going crazy with that.
reg_fetch_contacts("location", "$fu",
"existingContact");
if( $(ulc(existingContact=>user_agent)[0]) =~ "SPI/v"){
$var(oldDeviceId) =
$(ulc(existingContact=>callid)[0]{s.substr,9,0});
$var(newDeviceId) =
$(hdr(Call-ID){s.substr,9,0});
if($var(oldDeviceId) != $var(newDeviceId) ){
xlog("L_INFO","New device id is
different:warn previous user another user overide him");
$var(address) = $(ulc(existingContact=>
*received*)[0]);
$var(ruri) =
$(var(address){s.substr,4,0});
#Send a SIP Request signalling the
problem and its reason on the body
$uac_req(method)="MESSAGE";
$uac_req(ruri) = "sip:"+ $au + "@" +
$var(ruri);
$uac_req(furi) =
"sip:kamailio@sip_domain";
$uac_req(turi) = $fu;
$uac_req(hdrs)="Max-Forwards:
70\r\nEvent: reg\r\nContent-Type:
text/plain\r\nAccept-Contact:*;+g.ext.app.registration\r\n";
$uac_req(body)="Already registered with
another device id";
uac_req_send();
drop;
}
}
Thank you.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2:42 p.m.
I tried it but it is sending the unregister message to the second register
user.I want to send the message to previous.
First user register: ok
Second user register: register, and kamailio will send a message unregister
to the first.
First user: get unregister Message
Sorry, maybe I'm not understanding something. Now is sending the message to
contact.
El mié., 3 jun. 2020 a las 13:13, Ahmed Marsou (<amarsou1988(a)gmail.com>)
escribió:
Ok, thank you so much.
El mié., 3 jun. 2020 a las 12:54, Daniel-Constantin Mierla (<
miconda(a)gmail.com>) escribió:
> Hello,
>
> like Joel said, the reveiced filed in location record is set only for
> NATed contacts and in ipv6 likely it is not the case.
>
> What you should do is like:
>
> $uac_req(ruri) = $(ulc (existingContact=>addr)[0]);
>
> if($(ulc(existingContact=>received)[0]) != $null) {
>
> $uac_req(duri) = $(ulc(existingContact=>received)[0]);
>
> }
>
> Cheers,
> Daniel
> On 03.06.20 12:27, Ahmed Marsou wrote:
>
> Hi, thanks for your response. I appreciate the help, I really appreciate
> it.
> My problem is that I have to send a MESSAGE to an application to show the
> user a message.
> Like that:
>
>
>
>
>
>
>
>
>
> *$ var (address) = $ (ulc (existingContact => received) [0]); $ var
> (ruri) = $ (var (address) {s.substr, 4,0}); # Submit a SIP request stating
> the problem and its reason in the body $ uac_req (method) = "MESSAGE"; $
> uac_req (ruri) = "sip:" + $ au + "@" + $ var (ruri); $ uac_req
(furi) =
> "sip: kamailio @ sip_domain"; $ uac_req (turi) = $ fu; $ uac_req (hdrs) =
> "Max-Forwards: 70 \ r \ nEvent: reg \ r \ nContent-Type: text / plain \ r \
> nAccept-Contact: *; + g.ext.app.registration \ r \ n" ; $ uac_req (body) =
> "Already registered with another device ID"; uac_req_send ();*
>
> For the previous user, I mean. The first record, not the second. How can
> I get the first source IP address to replace $ var (address) = $ (ulc
> (existingContact => received) [0]); and send him the message? If I use save
> (); module, I will have the same problem, because I will not be able to
> find the previous IP source.
> Thank you so much.
> Kind regards.
>
> El mié., 3 jun. 2020 5:43, Joel Serrano <joel(a)textplus.com> escribió:
>
>> Not exactly an answer to your specific question, but it might help solve
>> your problem in a different way...
>>
>> If you using the registrar module with save()... you might be able to
>> take advantage in some way of the flags 0x04:
>>
>>
>> https://kamailio.org/docs/modules/5.3.x/modules/registrar.html#registrar.f.…
>>
>>
>> *"0x04 - store and maintain one contact per AoR. If there are other
>> contact addresses for AoR not matching current registration, remove them.
>> This mode ensures one contact per AoR (user)." *
>>
>> Regarding "received", I would think that you have it on IPV4 because
the
>> UA is probably behind NAT, and you are adding it in config script, with
>> IPv6, there is no NAT, and --most likely-- you are not adding it, thus it's
>> not saved to the database. Check if you are using fix_nated_register()
>> somewhere in your config file.. For IPv6 it might be easier if you just
>> pull the IP from the Contact info.
>>
>>
>> Sorry if this isn't very helpful, I'm guessing a little based on the
>> info you provided :)
>>
>> Cheers,
>> Joel.
>>
>>
>>
>> On Tue, Jun 2, 2020 at 4:46 PM Ahmed Marsou <amarsou1988(a)gmail.com>
>> wrote:
>>
>>> Hi;
>>> I'm using the received parameter to send a MESSAGE to unregsiter the
>>> first user that is registered to register the second one.
>>> Using:
>>> *modparam("usrloc", "received_column"*
>>>
>>> *modparam("registrar|nathelper", "received_avp", *
>>>
>>> and when I do a:
>>> select received from location;
>>> as you can see is null.
>>> +----------+
>>> | received |
>>> +----------+
>>> | NULL |
>>> +----------+
>>>
>>> In IPV4 is working fine, but in IPV6 is not. Can you tell me how can I
>>> get this value?
>>> Im going crazy with that.
>>>
>>> reg_fetch_contacts("location", "$fu",
>>> "existingContact");
>>> if( $(ulc(existingContact=>user_agent)[0]) =~
"SPI/v"){
>>> $var(oldDeviceId) =
>>> $(ulc(existingContact=>callid)[0]{s.substr,9,0});
>>> $var(newDeviceId) =
>>> $(hdr(Call-ID){s.substr,9,0});
>>> if($var(oldDeviceId) != $var(newDeviceId) ){
>>> xlog("L_INFO","New device id
is
>>> different:warn previous user another user overide him");
>>> $var(address) = $(ulc(existingContact=>
>>> *received*)[0]);
>>> $var(ruri) =
>>> $(var(address){s.substr,4,0});
>>> #Send a SIP Request signalling the
>>> problem and its reason on the body
>>> $uac_req(method)="MESSAGE";
>>> $uac_req(ruri) = "sip:"+ $au +
"@" +
>>> $var(ruri);
>>> $uac_req(furi) =
>>> "sip:kamailio@sip_domain";
>>> $uac_req(turi) = $fu;
>>> $uac_req(hdrs)="Max-Forwards:
>>> 70\r\nEvent: reg\r\nContent-Type:
>>> text/plain\r\nAccept-Contact:*;+g.ext.app.registration\r\n";
>>> $uac_req(body)="Already registered with
>>> another device id";
>>> uac_req_send();
>>> drop;
>>> }
>>> }
>>>
>>>
>>> Thank you.
>>>
>>>
>>> _______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users(a)lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
> Funding: https://www.paypal.me/dcmierla
>
>
1636
days inactive
1637
days old
5 comments
3 participants
participants (3)
-
Ahmed Marsou -
Daniel-Constantin Mierla -
Joel Serrano