9 Nov
2018
9 Nov
'18
7:09 p.m.
hello dears,
i'm using kamailio 5.1 as IMS , and i have the following servers:
* p-cscf
* i-cscf-1 ,icscf-2
* s-cscf-1,scscf-2
i need to do high availability and load balancing between my servers , but i have some
questions like do i have to use keepalived or dispatcher module and what the benefits of
each one of them ,and on load balancing method should i do it for the register requests or
only for invite requests or just for every thing ??
if any one has an idea or any thing to guide me i will be thankful
thanks in advance and regards
9 Nov
9 Nov
10:52 p.m.
Hi Eyas
A typical HA setup has two kamailio proxies with identical setup.
Use keepalived or similar to give the proxies a shared IP.
Because of the shared IP, all traffic will go to one proxy only.
Thus each of the proxies must be able to handle all traffic, mening the
functionality must be very simple - no media handling.
Then use the dispatcher module to do load balancing.
-------------------- Med Liberalistiske Hilsner ----------------------
Civilingeniør, Kjeld Flarup - Mit sind er mere åbent end min tegnebog
Sofienlundvej 6B, 7560 Hjerm, Tlf: 40 29 41 49
Den ikke akademiske hjemmeside for liberalismen - www.liberalismen.dk
On 11/9/18 5:09 PM, eyas barhouk wrote:
hello dears,
i'm using kamailio 5.1 as IMS , and i have the following servers:
* p-cscf
* i-cscf-1 ,icscf-2
* s-cscf-1,scscf-2
i need to do high availability and load balancing between my servers ,
but i have some questions like do i have to use keepalived or
dispatcher module and what the benefits of each one of them ,and on
load balancing method should i do it for the register requests or only
for invite requests or just for every thing ??
if any one has an idea or any thing to guide me i will be thankful
thanks in advance and regards
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
10 Nov
10 Nov
12:05 a.m.
Hi,
The concept of HA in IMS is a little different in non-IMS network.
In each node of CSCF in IMS, you could do HA separately.
For example in PCSCF, you could use DNS load balancer to select one of
your PCSCF. Actually the UE just see one domain as PCSCF, while you
may have more than one PCSCF in your network.
In each PCSCF, you could use dispatcher module to load balance all
Registration traffics between ICSCF nodes. All initiate traffices
(like Invite message and etc) route to specific SCSCF via
service-route header.
In Registration message in ICSCF nodes, you could use HA to load
balance traffics between SCSCF in LIR Diameter message. For example in
LIA Diameter, you could sent a name of SCSCF thet has lower traffics.
finally the HA in IMS is doning some procedure, not only one or two task.
With Regards. Mojtaba Esfandiari.S
On Fri, Nov 9, 2018 at 11:23 PM Kjeld Flarup
<kjeld.flarup(a)liberalismen.dk> wrote:
Hi Eyas
A typical HA setup has two kamailio proxies with identical setup.
Use keepalived or similar to give the proxies a shared IP.
Because of the shared IP, all traffic will go to one proxy only.
Thus each of the proxies must be able to handle all traffic, mening the functionality
must be very simple - no media handling.
Then use the dispatcher module to do load balancing.
-------------------- Med Liberalistiske Hilsner ----------------------
Civilingeniør, Kjeld Flarup - Mit sind er mere åbent end min tegnebog
Sofienlundvej 6B, 7560 Hjerm, Tlf: 40 29 41 49
Den ikke akademiske hjemmeside for liberalismen - www.liberalismen.dk
On 11/9/18 5:09 PM, eyas barhouk wrote:
hello dears,
i'm using kamailio 5.1 as IMS , and i have the following servers:
p-cscf
i-cscf-1 ,icscf-2
s-cscf-1,scscf-2
i need to do high availability and load balancing between my servers , but i have some
questions like do i have to use keepalived or dispatcher module and what the benefits of
each one of them ,and on load balancing method should i do it for the register requests or
only for invite requests or just for every thing ??
if any one has an idea or any thing to guide me i will be thankful
thanks in advance and regards
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
7:54 p.m.
thanks all for your kind reply,
Dear Mojtaba,
i'm confusing a little bit about the following part:
In Registration message in ICSCF nodes, you could use
HA to load
balance traffics between SCSCF in LIR Diameter message. For example in
LIA Diameter, you could sent a name of SCSCF thet has lower traffics.
i know that the LIA will handle the S-cscf name and capability to the i-cscf based on what
pre-defined on the HSS (user profile part) , so how could i know the S-cscf which has the
lower traffic and send it on the LIA message ??
if you have a tutorial or any guide i will be thankful.
thanks in advance & regards.
Eyas
________________________________
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Mojtaba
<mespio(a)gmail.com>
Sent: Friday, November 9, 2018 9:05 PM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] high availability and load balancing
Hi,
The concept of HA in IMS is a little different in non-IMS network.
In each node of CSCF in IMS, you could do HA separately.
For example in PCSCF, you could use DNS load balancer to select one of
your PCSCF. Actually the UE just see one domain as PCSCF, while you
may have more than one PCSCF in your network.
In each PCSCF, you could use dispatcher module to load balance all
Registration traffics between ICSCF nodes. All initiate traffices
(like Invite message and etc) route to specific SCSCF via
service-route header.
In Registration message in ICSCF nodes, you could use HA to load
balance traffics between SCSCF in LIR Diameter message. For example in
LIA Diameter, you could sent a name of SCSCF thet has lower traffics.
finally the HA in IMS is doning some procedure, not only one or two task.
With Regards. Mojtaba Esfandiari.S
On Fri, Nov 9, 2018 at 11:23 PM Kjeld Flarup
<kjeld.flarup(a)liberalismen.dk> wrote:
Hi Eyas
A typical HA setup has two kamailio proxies with identical setup.
Use keepalived or similar to give the proxies a shared IP.
Because of the shared IP, all traffic will go to one proxy only.
Thus each of the proxies must be able to handle all traffic, mening the functionality
must be very simple - no media handling.
Then use the dispatcher module to do load balancing.
-------------------- Med Liberalistiske Hilsner ----------------------
Civilingeniør, Kjeld Flarup - Mit sind er mere åbent end min tegnebog
Sofienlundvej 6B, 7560 Hjerm, Tlf: 40 29 41 49
Den ikke akademiske hjemmeside for liberalismen -
www.liberalismen.dk<http://www.liberalismen.dk>
On 11/9/18 5:09 PM, eyas barhouk wrote:
hello dears,
i'm using kamailio 5.1 as IMS , and i have the following servers:
p-cscf
i-cscf-1 ,icscf-2
s-cscf-1,scscf-2
i need to do high availability and load balancing between my servers , but i have some
questions like do i have to use keepalived or dispatcher module and what the benefits of
each one of them ,and on load balancing method should i do it for the register requests or
only for invite requests or just for every thing ??
if any one has an idea or any thing to guide me i will be thankful
thanks in advance and regards
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2207
days inactive
2208
days old
3 comments
3 participants
participants (3)
-
eyas barhouk -
Kjeld Flarup -
Mojtaba