Hi
iam integrating with openser+radius iam able to test radius with authentication
when iam running openser -v -f site.cfg ( config downloaded from http://www.openser.org/docs/openser-radius-1.0.x.html)
iam getting the following error
any help
ram
small correction last mail
openser -c -f site.cfg
On 8/7/07, ram talk2ram@gmail.com wrote:
Hi
iam integrating with openser+radius iam able to test radius with authentication
when iam running openser -v -f site.cfg ( config downloaded from http://www.openser.org/docs/openser-radius-1.0.x.html)
iam getting the following error
any help
ram
Hi Ram,
it looks like u have a problem using a configuration designed for version 1.1 into version 1.2. For more information, checkout the following link and do all the necessary changes: http://openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x - your attention "avp_aliases was moved to core".
Cheers, DanB
On 8/7/07, ram talk2ram@gmail.com wrote:
Hi
iam integrating with openser+radius iam able to test radius with authentication
when iam running openser -v -f site.cfg ( config downloaded from http://www.openser.org/docs/openser-radius-1.0.x.html)
iam getting the following error
any help
ram _______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
On 8/7/07, Dan-Cristian Bogos dan.bogos@gmail.com wrote:
Hi Ram,
it looks like u have a problem using a configuration designed for version 1.1 into version 1.2. For more information, checkout the following link and do all the necessary changes: http://openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x - your attention "avp_aliases was moved to core".
Hi
thanks i have fixed that problem
Now iam not able to authenticate with RadiusServer
iam getting below messages Radius -X ( using mysql authentication)
radtest works with out any problem.
any suggestions
rad_recv: Access-Request packet from host 127.0.0.1:32792, id=167, length=206 User-Name = "12345@x.x.x.x" Digest-Attributes = 0x0a073132333435 Digest-Attributes = 0x010e3230322e36332e39362e3130 Digest-Attributes = 0x022a34366238623963373764383466363735303231393633316431363463373861356233346432363832 Digest-Attributes = 0x04187369703a3132333435403230322e36332e39362e3130 Digest-Attributes = 0x030a5245474953544552 Digest-Response = "fad5249ae75d4b85a908316dc959116a" Service-Type = IAPP-Register X-Ascend-PW-Lifetime = 0x3132333435 NAS-Port = 5060 NAS-IP-Address = 127.0.0.1 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_digest: Converting Digest-Attributes to something sane... Digest-User-Name = "12345" Digest-Realm = "x.x.x.x" Digest-Nonce = "46b8b9c77d84f6750219631d164c78a5b34d2682" Digest-URI = " sip:12345@x.x.x.x" Digest-Method = "REGISTER" rlm_digest: Adding Auth-Type = DIGEST modcall[authorize]: module "digest" returns ok for request 6 rlm_realm: Looking up realm " x.x.x.x" for User-Name = "12345@x.x.x.x" rlm_realm: No such realm "x.x.x.x" modcall[authorize]: module "suffix" returns noop for request 6 radius_xlat: '12345@x.x.x.x' rlm_sql (sql): sql_set_user escaped user --> '12345@x.x.x.x' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = '12345@x.x.x.x' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 2 rlm_sql (sql): User 12345@x.x.x.x not found in radcheck radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName, radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '12345@x.x.x.x' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName, radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '12345@x.x.x.x' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): User 12345@x.x.x.x not found in radgroupcheck rlm_sql (sql): Released sql socket id: 2 rlm_sql (sql): User not found modcall[authorize]: module "sql" returns notfound for request 6 modcall: leaving group authorize (returns ok) for request 6 rad_check_password: Found Auth-Type DIGEST auth: type "DIGEST" Processing the authenticate section of radiusd.conf modcall: entering group DIGEST for request 6 rlm_digest: Configuration item "User-Password" or Digest-HA1 is required for authentication. modcall[authenticate]: module "digest" returns invalid for request 6 modcall: leaving group DIGEST (returns invalid) for request 6 auth: Failed to validate the user. Delaying request 6 for 1 seconds Finished request 6
ram
On 8/8/07, ram talk2ram@gmail.com wrote:
On 8/7/07, Dan-Cristian Bogos dan.bogos@gmail.com wrote:
Hi Ram,
it looks like u have a problem using a configuration designed for version 1.1 into version 1.2. For more information, checkout the following link and do all the necessary changes: http://openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x - your attention "avp_aliases was moved to core".
Hi
iam forgot to post my openser logs
here is my error log when my sipura try to authenticate
any suggestions
ram
2(13027) get_hdr_field: cseq <CSeq>: <50> <REGISTER> 2(13027) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(13027) parse_headers: flags=200 2(13027) DEBUG: get_hdr_body : content_length=0 2(13027) found end of header 2(13027) find_first_route: No Route headers found 2(13027) loose_route: There is no Route HF 2(13027) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) check_nonce(): comparing [46b8b9c77d84f6750219631d164c78a5b34d2682] and [46b8b9c74cd29426652511110717e60c270b4144] 2(13027) pre_auth(): Invalid nonce value received 2(13027) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6" ' 2(13027) parse_headers: flags=ffffffffffffffff 2(13027) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 2(13027) DEBUG:destroy_avp_list: destroying list (nil) 2(13027) receive_msg: cleaning up 1(13023) SIP Request: 1(13023) method: <REGISTER> 1(13023) uri: sip:X.X.X.X 1(13023) version: <SIP/2.0> 1(13023) parse_headers: flags=2 1(13023) Found param type 232, <branch> = <z9hG4bK-c4a0e25d>; state=16 1(13023) end of header reached, state=5 1(13023) parse_headers: Via found, flags=2 1(13023) parse_headers: this is the first via 1(13023) After parse_msg... 1(13023) preparing to run routing scripts... 1(13023) parse_headers: flags=100 1(13023) DEBUG:parse_to:end of header reached, state=10 1(13023) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 1(13023) DEBUG: get_hdr_field: <To> [32]; uri=[sip:12345@X.X.X.X] 1(13023) DEBUG: to body [12345 sip:12345@X.X.X.X ] 1(13023) get_hdr_field: cseq <CSeq>: <51> <REGISTER> 1(13023) DEBUG:maxfwd:is_maxfwd_present: value = 70 1(13023) parse_headers: flags=200 1(13023) DEBUG: get_hdr_body : content_length=0 1(13023) found end of header 1(13023) find_first_route: No Route headers found 1(13023) loose_route: There is no Route HF 1(13023) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) check_nonce(): comparing [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] and [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] 4(13030) SIP Request: 4(13030) method: <REGISTER> 4(13030) uri: sip:X.X.X.X 4(13030) version: <SIP/2.0> 4(13030) parse_headers: flags=2 4(13030) Found param type 232, <branch> = <z9hG4bK-c4a0e25d>; state=16 4(13030) end of header reached, state=5 4(13030) parse_headers: Via found, flags=2 4(13030) parse_headers: this is the first via 4(13030) After parse_msg... 4(13030) preparing to run routing scripts... 4(13030) parse_headers: flags=100 4(13030) DEBUG:parse_to:end of header reached, state=10 4(13030) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 4(13030) DEBUG: get_hdr_field: <To> [32]; uri=[sip:12345@X.X.X.X] 4(13030) DEBUG: to body [12345 sip:12345@X.X.X.X ] 4(13030) get_hdr_field: cseq <CSeq>: <51> <REGISTER> 4(13030) DEBUG:maxfwd:is_maxfwd_present: value = 70 4(13030) parse_headers: flags=200 4(13030) DEBUG: get_hdr_body : content_length=0 4(13030) found end of header 4(13030) find_first_route: No Route headers found 4(13030) loose_route: There is no Route HF 4(13030) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) check_nonce(): comparing [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] and [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] 2(13027) SIP Request: 2(13027) method: <REGISTER> 2(13027) uri: sip:X.X.X.X 2(13027) version: <SIP/2.0> 2(13027) parse_headers: flags=2 2(13027) Found param type 232, <branch> = <z9hG4bK-c4a0e25d>; state=16 2(13027) end of header reached, state=5 2(13027) parse_headers: Via found, flags=2 2(13027) parse_headers: this is the first via 2(13027) After parse_msg... 2(13027) preparing to run routing scripts... 2(13027) parse_headers: flags=100 2(13027) DEBUG:parse_to:end of header reached, state=10 2(13027) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 2(13027) DEBUG: get_hdr_field: <To> [32]; uri=[sip:12345@X.X.X.X] 2(13027) DEBUG: to body [12345 sip:12345@X.X.X.X ] 2(13027) get_hdr_field: cseq <CSeq>: <51> <REGISTER> 2(13027) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(13027) parse_headers: flags=200 2(13027) DEBUG: get_hdr_body : content_length=0 2(13027) found end of header 2(13027) find_first_route: No Route headers found 2(13027) loose_route: There is no Route HF 2(13027) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) check_nonce(): comparing [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] and [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] 1(13023) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 1(13023) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c386ef003653667ceb8f5946c66c39a5916e" ' 1(13023) parse_headers: flags=ffffffffffffffff 1(13023) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 1(13023) DEBUG:destroy_avp_list: destroying list (nil) 1(13023) receive_msg: cleaning up 1(13023) SIP Request: 1(13023) method: <REGISTER> 1(13023) uri: sip:X.X.X.X 1(13023) version: <SIP/2.0> 1(13023) parse_headers: flags=2 1(13023) Found param type 232, <branch> = <z9hG4bK-cab7643a>; state=16 1(13023) end of header reached, state=5 1(13023) parse_headers: Via found, flags=2 1(13023) parse_headers: this is the first via 1(13023) After parse_msg... 1(13023) preparing to run routing scripts... 1(13023) parse_headers: flags=100 1(13023) DEBUG:parse_to:end of header reached, state=10 1(13023) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 1(13023) DEBUG: get_hdr_field: <To> [32]; uri=[sip:12345@X.X.X.X] 1(13023) DEBUG: to body [12345 sip:12345@X.X.X.X ] 1(13023) get_hdr_field: cseq <CSeq>: <52> <REGISTER> 1(13023) DEBUG:maxfwd:is_maxfwd_present: value = 70 1(13023) parse_headers: flags=200 1(13023) DEBUG: get_hdr_body : content_length=0 1(13023) found end of header 1(13023) find_first_route: No Route headers found 1(13023) loose_route: There is no Route HF 1(13023) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) check_nonce(): comparing [46b8c386ef003653667ceb8f5946c66c39a5916e] and [46b8c386ef003653667ceb8f5946c66c39a5916e] 4(13030) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 4(13030) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c386ef003653667ceb8f5946c66c39a5916e" ' 4(13030) parse_headers: flags=ffffffffffffffff 4(13030) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 4(13030) DEBUG:destroy_avp_list: destroying list (nil) 4(13030) receive_msg: cleaning up 4(13030) SIP Request: 4(13030) method: <REGISTER> 4(13030) uri: sip:X.X.X.X 4(13030) version: <SIP/2.0> 4(13030) parse_headers: flags=2 4(13030) Found param type 232, <branch> = <z9hG4bK-cab7643a>; state=16 4(13030) end of header reached, state=5 4(13030) parse_headers: Via found, flags=2 4(13030) parse_headers: this is the first via 4(13030) After parse_msg... 4(13030) preparing to run routing scripts... 4(13030) parse_headers: flags=100 4(13030) DEBUG:parse_to:end of header reached, state=10 4(13030) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 4(13030) DEBUG: get_hdr_field: <To> [32]; uri=[sip:12345@X.X.X.X] 4(13030) DEBUG: to body [12345 sip:12345@X.X.X.X ] 4(13030) get_hdr_field: cseq <CSeq>: <52> <REGISTER> 4(13030) DEBUG:maxfwd:is_maxfwd_present: value = 70 4(13030) parse_headers: flags=200 4(13030) DEBUG: get_hdr_body : content_length=0 4(13030) found end of header 4(13030) find_first_route: No Route headers found 4(13030) loose_route: There is no Route HF 4(13030) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) check_nonce(): comparing [46b8c386ef003653667ceb8f5946c66c39a5916e] and [46b8c386ef003653667ceb8f5946c66c39a5916e] 3(13029) SIP Request: 3(13029) method: <REGISTER> 3(13029) uri: sip:X.X.X.X 3(13029) version: <SIP/2.0> 3(13029) parse_headers: flags=2 3(13029) Found param type 232, <branch> = <z9hG4bK-cab7643a>; state=16 3(13029) end of header reached, state=5 3(13029) parse_headers: Via found, flags=2 3(13029) parse_headers: this is the first via 3(13029) After parse_msg... 3(13029) preparing to run routing scripts... 3(13029) parse_headers: flags=100 3(13029) DEBUG:parse_to:end of header reached, state=10 3(13029) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 3(13029) DEBUG: get_hdr_field: <To> [32]; uri=[sip:12345@X.X.X.X] 3(13029) DEBUG: to body [12345 sip:12345@X.X.X.X ] 3(13029) get_hdr_field: cseq <CSeq>: <52> <REGISTER> 3(13029) DEBUG:maxfwd:is_maxfwd_present: value = 70 3(13029) parse_headers: flags=200 3(13029) DEBUG: get_hdr_body : content_length=0 3(13029) found end of header 3(13029) find_first_route: No Route headers found 3(13029) loose_route: There is no Route HF 3(13029) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 3(13029) grep_sock_info - checking if port 5060 matches port 5060 3(13029) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [ X.X.X.X] 3(13029) grep_sock_info - checking if port 5060 matches port 5060 3(13029) check_nonce(): comparing [46b8c386ef003653667ceb8f5946c66c39a5916e] and [46b8c386ef003653667ceb8f5946c66c39a5916e] 2(13027) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 2(13027) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c388a3a803a04e8a22ee660de29dacab1456" ' 2(13027) parse_headers: flags=ffffffffffffffff 2(13027) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 2(13027) DEBUG:destroy_avp_list: destroying list (nil) 2(13027) receive_msg: cleaning up 1(13023) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 1(13023) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c388a3a803a04e8a22ee660de29dacab1456" ' 1(13023) parse_headers: flags=ffffffffffffffff 1(13023) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 1(13023) DEBUG:destroy_avp_list: destroying list (nil) 1(13023) receive_msg: cleaning up 4(13030) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 4(13030) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c388a3a803a04e8a22ee660de29dacab1456" ' 4(13030) parse_headers: flags=ffffffffffffffff 4(13030) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 4(13030) DEBUG:destroy_avp_list: destroying list (nil) 4(13030) receive_msg: cleaning up 3(13029) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 3(13029) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c38980794d4ddca01a8de941789cb20934a0" ' 3(13029) parse_headers: flags=ffffffffffffffff 3(13029) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 3(13029) DEBUG:destroy_avp_list: destroying list (nil) 3(13029) receive_msg: cleaning up
Ram,
from your radiusd logs: "User 12345@x.x.x.x not found in radcheck ". You should make sure that this user is present into your radcheck table.
DanB
On 8/7/07, ram talk2ram@gmail.com wrote:
On 8/8/07, ram talk2ram@gmail.com wrote:
On 8/7/07, Dan-Cristian Bogos < dan.bogos@gmail.com> wrote:
Hi Ram,
it looks like u have a problem using a configuration designed for version 1.1 into version 1.2. For more information, checkout the following link and do all the necessary changes:
http://openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x
- your
attention "avp_aliases was moved to core".
Hi
iam forgot to post my openser logs
here is my error log when my sipura try to authenticate
any suggestions
ram
2(13027) get_hdr_field: cseq <CSeq>: <50> <REGISTER> 2(13027) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(13027) parse_headers: flags=200 2(13027) DEBUG: get_hdr_body : content_length=0 2(13027) found end of header 2(13027) find_first_route: No Route headers found 2(13027) loose_route: There is no Route HF 2(13027) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X ] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) check_nonce(): comparing [46b8b9c77d84f6750219631d164c78a5b34d2682] and [46b8b9c74cd29426652511110717e60c270b4144] 2(13027) pre_auth(): Invalid nonce value received 2(13027) build_auth_hf(): 'WWW-Authenticate: Digest realm=" X.X.X.X", nonce="46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6" ' 2(13027) parse_headers: flags=ffffffffffffffff 2(13027) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 2(13027) DEBUG:destroy_avp_list: destroying list (nil) 2(13027) receive_msg: cleaning up 1(13023) SIP Request: 1(13023) method: <REGISTER> 1(13023) uri: sip:X.X.X.X 1(13023) version: <SIP/2.0> 1(13023) parse_headers: flags=2 1(13023) Found param type 232, <branch> = <z9hG4bK-c4a0e25d>; state=16 1(13023) end of header reached, state=5 1(13023) parse_headers: Via found, flags=2 1(13023) parse_headers: this is the first via 1(13023) After parse_msg... 1(13023) preparing to run routing scripts... 1(13023) parse_headers: flags=100 1(13023) DEBUG:parse_to:end of header reached, state=10 1(13023) DBUG:parse_to: display={12345}, ruri={ sip:12345@X.X.X.X} 1(13023) DEBUG: get_hdr_field: <To> [32]; uri=[sip:12345@X.X.X.X] 1(13023) DEBUG: to body [12345 < sip:12345@X.X.X.X> ] 1(13023) get_hdr_field: cseq <CSeq>: <51> <REGISTER> 1(13023) DEBUG:maxfwd:is_maxfwd_present: value = 70 1(13023) parse_headers: flags=200 1(13023) DEBUG: get_hdr_body : content_length=0 1(13023) found end of header 1(13023) find_first_route: No Route headers found 1(13023) loose_route: There is no Route HF 1(13023) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X ] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) check_nonce(): comparing [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] and [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] 4(13030) SIP Request: 4(13030) method: <REGISTER> 4(13030) uri: <sip: X.X.X.X> 4(13030) version: <SIP/2.0> 4(13030) parse_headers: flags=2 4(13030) Found param type 232, <branch> = <z9hG4bK-c4a0e25d>; state=16 4(13030) end of header reached, state=5 4(13030) parse_headers: Via found, flags=2 4(13030) parse_headers: this is the first via 4(13030) After parse_msg... 4(13030) preparing to run routing scripts... 4(13030) parse_headers: flags=100 4(13030) DEBUG:parse_to:end of header reached, state=10 4(13030) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 4(13030) DEBUG: get_hdr_field: <To> [32]; uri=[sip:12345@X.X.X.X ] 4(13030) DEBUG: to body [12345 sip:12345@X.X.X.X ] 4(13030) get_hdr_field: cseq <CSeq>: <51> <REGISTER> 4(13030) DEBUG:maxfwd:is_maxfwd_present: value = 70 4(13030) parse_headers: flags=200 4(13030) DEBUG: get_hdr_body : content_length=0 4(13030) found end of header 4(13030) find_first_route: No Route headers found 4(13030) loose_route: There is no Route HF 4(13030) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) grep_sock_info - checking if host==us: 12==12 && [ X.X.X.X] == [X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) check_nonce(): comparing [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] and [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] 2(13027) SIP Request: 2(13027) method: <REGISTER> 2(13027) uri: sip:X.X.X.X 2(13027) version: <SIP/2.0> 2(13027) parse_headers: flags=2 2(13027) Found param type 232, <branch> = <z9hG4bK-c4a0e25d>; state=16 2(13027) end of header reached, state=5 2(13027) parse_headers: Via found, flags=2 2(13027) parse_headers: this is the first via 2(13027) After parse_msg... 2(13027) preparing to run routing scripts... 2(13027) parse_headers: flags=100 2(13027) DEBUG:parse_to:end of header reached, state=10 2(13027) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 2(13027) DEBUG: get_hdr_field: <To> [32]; uri=[ sip:12345@X.X.X.X] 2(13027) DEBUG: to body [12345 sip:12345@X.X.X.X ] 2(13027) get_hdr_field: cseq <CSeq>: <51> <REGISTER> 2(13027) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(13027) parse_headers: flags=200 2(13027) DEBUG: get_hdr_body : content_length=0 2(13027) found end of header 2(13027) find_first_route: No Route headers found 2(13027) loose_route: There is no Route HF 2(13027) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) grep_sock_info - checking if host==us: 12==12 && [ X.X.X.X] == [X.X.X.X] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) check_nonce(): comparing [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] and [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] 1(13023) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 1(13023) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c386ef003653667ceb8f5946c66c39a5916e" ' 1(13023) parse_headers: flags=ffffffffffffffff 1(13023) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 1(13023) DEBUG:destroy_avp_list: destroying list (nil) 1(13023) receive_msg: cleaning up 1(13023) SIP Request: 1(13023) method: <REGISTER> 1(13023) uri: sip:X.X.X.X 1(13023) version: <SIP/2.0> 1(13023) parse_headers: flags=2 1(13023) Found param type 232, <branch> = <z9hG4bK-cab7643a>; state=16 1(13023) end of header reached, state=5 1(13023) parse_headers: Via found, flags=2 1(13023) parse_headers: this is the first via 1(13023) After parse_msg... 1(13023) preparing to run routing scripts... 1(13023) parse_headers: flags=100 1(13023) DEBUG:parse_to:end of header reached, state=10 1(13023) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 1(13023) DEBUG: get_hdr_field: <To> [32]; uri=[ sip:12345@X.X.X.X] 1(13023) DEBUG: to body [12345 sip:12345@X.X.X.X ] 1(13023) get_hdr_field: cseq <CSeq>: <52> <REGISTER> 1(13023) DEBUG:maxfwd:is_maxfwd_present: value = 70 1(13023) parse_headers: flags=200 1(13023) DEBUG: get_hdr_body : content_length=0 1(13023) found end of header 1(13023) find_first_route: No Route headers found 1(13023) loose_route: There is no Route HF 1(13023) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) grep_sock_info - checking if host==us: 12==12 && [ X.X.X.X] == [X.X.X.X] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) check_nonce(): comparing [46b8c386ef003653667ceb8f5946c66c39a5916e] and [46b8c386ef003653667ceb8f5946c66c39a5916e] 4(13030) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 4(13030) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c386ef003653667ceb8f5946c66c39a5916e" ' 4(13030) parse_headers: flags=ffffffffffffffff 4(13030) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 4(13030) DEBUG:destroy_avp_list: destroying list (nil) 4(13030) receive_msg: cleaning up 4(13030) SIP Request: 4(13030) method: <REGISTER> 4(13030) uri: sip:X.X.X.X 4(13030) version: <SIP/2.0> 4(13030) parse_headers: flags=2 4(13030) Found param type 232, <branch> = <z9hG4bK-cab7643a>; state=16 4(13030) end of header reached, state=5 4(13030) parse_headers: Via found, flags=2 4(13030) parse_headers: this is the first via 4(13030) After parse_msg... 4(13030) preparing to run routing scripts... 4(13030) parse_headers: flags=100 4(13030) DEBUG:parse_to:end of header reached, state=10 4(13030) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 4(13030) DEBUG: get_hdr_field: <To> [32]; uri=[ sip:12345@X.X.X.X] 4(13030) DEBUG: to body [12345 sip:12345@X.X.X.X ] 4(13030) get_hdr_field: cseq <CSeq>: <52> <REGISTER> 4(13030) DEBUG:maxfwd:is_maxfwd_present: value = 70 4(13030) parse_headers: flags=200 4(13030) DEBUG: get_hdr_body : content_length=0 4(13030) found end of header 4(13030) find_first_route: No Route headers found 4(13030) loose_route: There is no Route HF 4(13030) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) grep_sock_info - checking if host==us: 12==12 && [ X.X.X.X] == [X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) check_nonce(): comparing [46b8c386ef003653667ceb8f5946c66c39a5916e] and [46b8c386ef003653667ceb8f5946c66c39a5916e] 3(13029) SIP Request: 3(13029) method: <REGISTER> 3(13029) uri: sip:X.X.X.X 3(13029) version: <SIP/2.0> 3(13029) parse_headers: flags=2 3(13029) Found param type 232, <branch> = <z9hG4bK-cab7643a>; state=16 3(13029) end of header reached, state=5 3(13029) parse_headers: Via found, flags=2 3(13029) parse_headers: this is the first via 3(13029) After parse_msg... 3(13029) preparing to run routing scripts... 3(13029) parse_headers: flags=100 3(13029) DEBUG:parse_to:end of header reached, state=10 3(13029) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 3(13029) DEBUG: get_hdr_field: <To> [32]; uri=[ sip:12345@X.X.X.X] 3(13029) DEBUG: to body [12345 sip:12345@X.X.X.X ] 3(13029) get_hdr_field: cseq <CSeq>: <52> <REGISTER> 3(13029) DEBUG:maxfwd:is_maxfwd_present: value = 70 3(13029) parse_headers: flags=200 3(13029) DEBUG: get_hdr_body : content_length=0 3(13029) found end of header 3(13029) find_first_route: No Route headers found 3(13029) loose_route: There is no Route HF 3(13029) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 3(13029) grep_sock_info - checking if port 5060 matches port 5060 3(13029) grep_sock_info - checking if host==us: 12==12 && [ X.X.X.X] == [X.X.X.X] 3(13029) grep_sock_info - checking if port 5060 matches port 5060 3(13029) check_nonce(): comparing [46b8c386ef003653667ceb8f5946c66c39a5916e] and [46b8c386ef003653667ceb8f5946c66c39a5916e] 2(13027) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 2(13027) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c388a3a803a04e8a22ee660de29dacab1456" ' 2(13027) parse_headers: flags=ffffffffffffffff 2(13027) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 2(13027) DEBUG:destroy_avp_list: destroying list (nil) 2(13027) receive_msg: cleaning up 1(13023) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 1(13023) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c388a3a803a04e8a22ee660de29dacab1456" ' 1(13023) parse_headers: flags=ffffffffffffffff 1(13023) check_via_address( X.X.X.X.99, X.X.X.X.99, 0) 1(13023) DEBUG:destroy_avp_list: destroying list (nil) 1(13023) receive_msg: cleaning up 4(13030) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 4(13030) build_auth_hf(): 'WWW-Authenticate: Digest realm=" X.X.X.X", nonce="46b8c388a3a803a04e8a22ee660de29dacab1456" ' 4(13030) parse_headers: flags=ffffffffffffffff 4(13030) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 4(13030) DEBUG:destroy_avp_list: destroying list (nil) 4(13030) receive_msg: cleaning up 3(13029) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 3(13029) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c38980794d4ddca01a8de941789cb20934a0" ' 3(13029) parse_headers: flags=ffffffffffffffff 3(13029) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 3(13029) DEBUG:destroy_avp_list: destroying list (nil) 3(13029) receive_msg: cleaning up
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Ram,
can u Check the entity of the RadCheck table in Radius Databases, The entity should be like this :-)
username = > xxxx@xx.xx.xxx.xx Attribute => Password operaiton = > := value => value of the Password
Thanks & Regrads Sunkara Ravi Prakash VoIP System Anaylst India
On 8/8/07, Dan-Cristian Bogos dan.bogos@gmail.com wrote:
Ram,
from your radiusd logs: "User 12345@x.x.x.x not found in radcheck ". You should make sure that this user is present into your radcheck table.
DanB
On 8/7/07, ram talk2ram@gmail.com wrote:
On 8/8/07, ram talk2ram@gmail.com wrote:
On 8/7/07, Dan-Cristian Bogos < dan.bogos@gmail.com> wrote:
Hi Ram,
it looks like u have a problem using a configuration designed for version 1.1 into version 1.2. For more information, checkout the following link and do all the necessary changes:
http://openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x
- your
attention "avp_aliases was moved to core".
Hi
iam forgot to post my openser logs
here is my error log when my sipura try to authenticate
any suggestions
ram
2(13027) get_hdr_field: cseq <CSeq>: <50> <REGISTER> 2(13027) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(13027) parse_headers: flags=200 2(13027) DEBUG: get_hdr_body : content_length=0 2(13027) found end of header 2(13027) find_first_route: No Route headers found 2(13027) loose_route: There is no Route HF 2(13027) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X ] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) check_nonce(): comparing [46b8b9c77d84f6750219631d164c78a5b34d2682] and [46b8b9c74cd29426652511110717e60c270b4144] 2(13027) pre_auth(): Invalid nonce value received 2(13027) build_auth_hf(): 'WWW-Authenticate: Digest realm=" X.X.X.X", nonce="46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6" ' 2(13027) parse_headers: flags=ffffffffffffffff 2(13027) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 2(13027) DEBUG:destroy_avp_list: destroying list (nil) 2(13027) receive_msg: cleaning up 1(13023) SIP Request: 1(13023) method: <REGISTER> 1(13023) uri: sip:X.X.X.X 1(13023) version: <SIP/2.0> 1(13023) parse_headers: flags=2 1(13023) Found param type 232, <branch> = <z9hG4bK-c4a0e25d>; state=16 1(13023) end of header reached, state=5 1(13023) parse_headers: Via found, flags=2 1(13023) parse_headers: this is the first via 1(13023) After parse_msg... 1(13023) preparing to run routing scripts... 1(13023) parse_headers: flags=100 1(13023) DEBUG:parse_to:end of header reached, state=10 1(13023) DBUG:parse_to: display={12345}, ruri={ sip:12345@X.X.X.X} 1(13023) DEBUG: get_hdr_field: <To> [32]; uri=[sip:12345@X.X.X.X] 1(13023) DEBUG: to body [12345 < sip:12345@X.X.X.X> ] 1(13023) get_hdr_field: cseq <CSeq>: <51> <REGISTER> 1(13023) DEBUG:maxfwd:is_maxfwd_present: value = 70 1(13023) parse_headers: flags=200 1(13023) DEBUG: get_hdr_body : content_length=0 1(13023) found end of header 1(13023) find_first_route: No Route headers found 1(13023) loose_route: There is no Route HF 1(13023) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X ] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) check_nonce(): comparing [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] and [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] 4(13030) SIP Request: 4(13030) method: <REGISTER> 4(13030) uri: <sip: X.X.X.X> 4(13030) version: <SIP/2.0> 4(13030) parse_headers: flags=2 4(13030) Found param type 232, <branch> = <z9hG4bK-c4a0e25d>; state=16 4(13030) end of header reached, state=5 4(13030) parse_headers: Via found, flags=2 4(13030) parse_headers: this is the first via 4(13030) After parse_msg... 4(13030) preparing to run routing scripts... 4(13030) parse_headers: flags=100 4(13030) DEBUG:parse_to:end of header reached, state=10 4(13030) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 4(13030) DEBUG: get_hdr_field: <To> [32]; uri=[sip:12345@X.X.X.X ] 4(13030) DEBUG: to body [12345 sip:12345@X.X.X.X ] 4(13030) get_hdr_field: cseq <CSeq>: <51> <REGISTER> 4(13030) DEBUG:maxfwd:is_maxfwd_present: value = 70 4(13030) parse_headers: flags=200 4(13030) DEBUG: get_hdr_body : content_length=0 4(13030) found end of header 4(13030) find_first_route: No Route headers found 4(13030) loose_route: There is no Route HF 4(13030) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) grep_sock_info - checking if host==us: 12==12 && [ X.X.X.X]
==
[X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) check_nonce(): comparing [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] and [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] 2(13027) SIP Request: 2(13027) method: <REGISTER> 2(13027) uri: sip:X.X.X.X 2(13027) version: <SIP/2.0> 2(13027) parse_headers: flags=2 2(13027) Found param type 232, <branch> = <z9hG4bK-c4a0e25d>; state=16 2(13027) end of header reached, state=5 2(13027) parse_headers: Via found, flags=2 2(13027) parse_headers: this is the first via 2(13027) After parse_msg... 2(13027) preparing to run routing scripts... 2(13027) parse_headers: flags=100 2(13027) DEBUG:parse_to:end of header reached, state=10 2(13027) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 2(13027) DEBUG: get_hdr_field: <To> [32]; uri=[ sip:12345@X.X.X.X] 2(13027) DEBUG: to body [12345 sip:12345@X.X.X.X ] 2(13027) get_hdr_field: cseq <CSeq>: <51> <REGISTER> 2(13027) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(13027) parse_headers: flags=200 2(13027) DEBUG: get_hdr_body : content_length=0 2(13027) found end of header 2(13027) find_first_route: No Route headers found 2(13027) loose_route: There is no Route HF 2(13027) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) grep_sock_info - checking if host==us: 12==12 && [ X.X.X.X]
==
[X.X.X.X] 2(13027) grep_sock_info - checking if port 5060 matches port 5060 2(13027) check_nonce(): comparing [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] and [46b8c3843dc677a5fc9e5aae6101a1c6f30b5ed6] 1(13023) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 1(13023) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c386ef003653667ceb8f5946c66c39a5916e" ' 1(13023) parse_headers: flags=ffffffffffffffff 1(13023) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 1(13023) DEBUG:destroy_avp_list: destroying list (nil) 1(13023) receive_msg: cleaning up 1(13023) SIP Request: 1(13023) method: <REGISTER> 1(13023) uri: sip:X.X.X.X 1(13023) version: <SIP/2.0> 1(13023) parse_headers: flags=2 1(13023) Found param type 232, <branch> = <z9hG4bK-cab7643a>; state=16 1(13023) end of header reached, state=5 1(13023) parse_headers: Via found, flags=2 1(13023) parse_headers: this is the first via 1(13023) After parse_msg... 1(13023) preparing to run routing scripts... 1(13023) parse_headers: flags=100 1(13023) DEBUG:parse_to:end of header reached, state=10 1(13023) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 1(13023) DEBUG: get_hdr_field: <To> [32]; uri=[ sip:12345@X.X.X.X] 1(13023) DEBUG: to body [12345 sip:12345@X.X.X.X ] 1(13023) get_hdr_field: cseq <CSeq>: <52> <REGISTER> 1(13023) DEBUG:maxfwd:is_maxfwd_present: value = 70 1(13023) parse_headers: flags=200 1(13023) DEBUG: get_hdr_body : content_length=0 1(13023) found end of header 1(13023) find_first_route: No Route headers found 1(13023) loose_route: There is no Route HF 1(13023) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) grep_sock_info - checking if host==us: 12==12 && [ X.X.X.X]
==
[X.X.X.X] 1(13023) grep_sock_info - checking if port 5060 matches port 5060 1(13023) check_nonce(): comparing [46b8c386ef003653667ceb8f5946c66c39a5916e] and [46b8c386ef003653667ceb8f5946c66c39a5916e] 4(13030) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 4(13030) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c386ef003653667ceb8f5946c66c39a5916e" ' 4(13030) parse_headers: flags=ffffffffffffffff 4(13030) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 4(13030) DEBUG:destroy_avp_list: destroying list (nil) 4(13030) receive_msg: cleaning up 4(13030) SIP Request: 4(13030) method: <REGISTER> 4(13030) uri: sip:X.X.X.X 4(13030) version: <SIP/2.0> 4(13030) parse_headers: flags=2 4(13030) Found param type 232, <branch> = <z9hG4bK-cab7643a>; state=16 4(13030) end of header reached, state=5 4(13030) parse_headers: Via found, flags=2 4(13030) parse_headers: this is the first via 4(13030) After parse_msg... 4(13030) preparing to run routing scripts... 4(13030) parse_headers: flags=100 4(13030) DEBUG:parse_to:end of header reached, state=10 4(13030) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 4(13030) DEBUG: get_hdr_field: <To> [32]; uri=[ sip:12345@X.X.X.X] 4(13030) DEBUG: to body [12345 sip:12345@X.X.X.X ] 4(13030) get_hdr_field: cseq <CSeq>: <52> <REGISTER> 4(13030) DEBUG:maxfwd:is_maxfwd_present: value = 70 4(13030) parse_headers: flags=200 4(13030) DEBUG: get_hdr_body : content_length=0 4(13030) found end of header 4(13030) find_first_route: No Route headers found 4(13030) loose_route: There is no Route HF 4(13030) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) grep_sock_info - checking if host==us: 12==12 && [ X.X.X.X]
==
[X.X.X.X] 4(13030) grep_sock_info - checking if port 5060 matches port 5060 4(13030) check_nonce(): comparing [46b8c386ef003653667ceb8f5946c66c39a5916e] and [46b8c386ef003653667ceb8f5946c66c39a5916e] 3(13029) SIP Request: 3(13029) method: <REGISTER> 3(13029) uri: sip:X.X.X.X 3(13029) version: <SIP/2.0> 3(13029) parse_headers: flags=2 3(13029) Found param type 232, <branch> = <z9hG4bK-cab7643a>; state=16 3(13029) end of header reached, state=5 3(13029) parse_headers: Via found, flags=2 3(13029) parse_headers: this is the first via 3(13029) After parse_msg... 3(13029) preparing to run routing scripts... 3(13029) parse_headers: flags=100 3(13029) DEBUG:parse_to:end of header reached, state=10 3(13029) DBUG:parse_to: display={12345}, ruri={sip:12345@X.X.X.X} 3(13029) DEBUG: get_hdr_field: <To> [32]; uri=[ sip:12345@X.X.X.X] 3(13029) DEBUG: to body [12345 sip:12345@X.X.X.X ] 3(13029) get_hdr_field: cseq <CSeq>: <52> <REGISTER> 3(13029) DEBUG:maxfwd:is_maxfwd_present: value = 70 3(13029) parse_headers: flags=200 3(13029) DEBUG: get_hdr_body : content_length=0 3(13029) found end of header 3(13029) find_first_route: No Route headers found 3(13029) loose_route: There is no Route HF 3(13029) grep_sock_info - checking if host==us: 12==12 && [X.X.X.X] == [X.X.X.X] 3(13029) grep_sock_info - checking if port 5060 matches port 5060 3(13029) grep_sock_info - checking if host==us: 12==12 && [ X.X.X.X]
==
[X.X.X.X] 3(13029) grep_sock_info - checking if port 5060 matches port 5060 3(13029) check_nonce(): comparing [46b8c386ef003653667ceb8f5946c66c39a5916e] and [46b8c386ef003653667ceb8f5946c66c39a5916e] 2(13027) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 2(13027) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c388a3a803a04e8a22ee660de29dacab1456" ' 2(13027) parse_headers: flags=ffffffffffffffff 2(13027) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 2(13027) DEBUG:destroy_avp_list: destroying list (nil) 2(13027) receive_msg: cleaning up 1(13023) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 1(13023) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c388a3a803a04e8a22ee660de29dacab1456" ' 1(13023) parse_headers: flags=ffffffffffffffff 1(13023) check_via_address( X.X.X.X.99, X.X.X.X.99, 0) 1(13023) DEBUG:destroy_avp_list: destroying list (nil) 1(13023) receive_msg: cleaning up 4(13030) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 4(13030) build_auth_hf(): 'WWW-Authenticate: Digest realm=" X.X.X.X", nonce="46b8c388a3a803a04e8a22ee660de29dacab1456" ' 4(13030) parse_headers: flags=ffffffffffffffff 4(13030) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 4(13030) DEBUG:destroy_avp_list: destroying list (nil) 4(13030) receive_msg: cleaning up 3(13029) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 3(13029) build_auth_hf(): 'WWW-Authenticate: Digest realm="X.X.X.X", nonce="46b8c38980794d4ddca01a8de941789cb20934a0" ' 3(13029) parse_headers: flags=ffffffffffffffff 3(13029) check_via_address(X.X.X.X.99, X.X.X.X.99, 0) 3(13029) DEBUG:destroy_avp_list: destroying list (nil) 3(13029) receive_msg: cleaning up
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
On 8/8/07, Dan-Cristian Bogos dan.bogos@gmail.com wrote:
Ram,
from your radiusd logs: "User 12345@x.x.x.x not found in radcheck ". You should make sure that this user is present into your radcheck table.
yes its present here is the results
select * from radcheck; +----+----------+---------------+----+-------+ | id | UserName | Attribute | op | Value | +----+----------+---------------+----+-------+ | 1 | 12345 | User-Password | == | 12345 | +----+----------+---------------+----+-------+
ram
Ys, but based on you query u should have( I can see there only 12345): 12345@x.x.x.x
DanB
On 8/8/07, ram talk2ram@gmail.com wrote:
On 8/8/07, Dan-Cristian Bogos dan.bogos@gmail.com wrote:
Ram,
from your radiusd logs: "User 12345@x.x.x.x not found in radcheck ". You should make sure that this user is present into your radcheck table.
yes its present here is the results
select * from radcheck; +----+----------+---------------+----+-------+ | id | UserName | Attribute | op | Value | +----+----------+---------------+----+-------+ | 1 | 12345 | User-Password | == | 12345 | +----+----------+---------------+----+-------+
ram
-
Dan-Cristian Bogos -
ram -
raviprakash sunkara