15 Mar
2004
15 Mar
'04
5:54 p.m.
I attempted to implement the code in the example for PSTN gateway where
after matching the enum in the user portion of the uri it uses
t_relay_to. When I
implement this I get unable to find t_relay_to in the startup of ser. It
find t_relay so I know that the tm module is loaded and exists, when I
do nm on the module I see the symbol t_relay_to in there as well???
# attempt handoff to PSTN
if (uri=~"^sip:9[0-9]*@.*") {
log("Forwarding to PSTN\n");
t_relay_to( "192.168.0.2", "5060");
break;
};
15 Mar
15 Mar
5:57 p.m.
Hi,
try t_relay_to_udp("192.168.0.2", "5060")
Bogdan
Stephen James wrote:
I attempted to implement the code in the example for
PSTN gateway
where after matching the enum in the user portion of the uri it uses
t_relay_to. When I
implement this I get unable to find t_relay_to in the startup of ser.
It find t_relay so I know that the tm module is loaded and exists,
when I do nm on the module I see the symbol t_relay_to in there as well???
# attempt handoff to PSTN
if (uri=~"^sip:9[0-9]*@.*") {
log("Forwarding to PSTN\n");
t_relay_to( "192.168.0.2", "5060");
break;
};
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
5:59 p.m.
Try t_relay_to_udp !
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of Stephen James
Sent: 15 March 2004 15:54
To: serusers(a)lists.iptel.org
Subject: [Serusers] t_relay_to
I attempted to implement the code in the example for PSTN gateway where
after matching the enum in the user portion of the uri it uses t_relay_to.
When I
implement this I get unable to find t_relay_to in the startup of ser. It
find t_relay so I know that the tm module is loaded and exists, when I do nm
on the module I see the symbol t_relay_to in there as well???
# attempt handoff to PSTN
if (uri=~"^sip:9[0-9]*@.*") {
log("Forwarding to PSTN\n");
t_relay_to( "192.168.0.2", "5060");
break;
};
-------------------------------------------------------------------------------------------------------
This email, and any files transmitted with it, is copyright and may contain confidential
information.
The contents are intended for the use of the addressee(s) only.
Unauthorized use may be unlawful.
If you receive this email by mistake, please advise sender immediately.
The views of the author may not necessarily constitute the views of Telco Electronics
Limited.
Nothing in this mail shall bind Telco Electronics Limited in any contract or obligation.
Telco Electronics Limited
6-8 Oxford Court
Brackley
Northants
NN13 7XY
Tel 07000 701999
Fax 07000 701777
6:36 p.m.
Ok. that seems to work. But why? Do I need to place a t_relay_to_udp
and t_relay_to_tcp with logic.
-----Original Message-----
From: Alan Litster [mailto:alitster@telcoelectronics.co.uk]
Sent: Monday, March 15, 2004 9:59 AM
To: Stephen James; SER Mailing List
Subject: RE: [Serusers] t_relay_to
Try t_relay_to_udp !
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of Stephen James
Sent: 15 March 2004 15:54
To: serusers(a)lists.iptel.org
Subject: [Serusers] t_relay_to
I attempted to implement the code in the example for PSTN gateway where
after matching the enum in the user portion of the uri it uses
t_relay_to. When I implement this I get unable to find t_relay_to in the
startup of ser. It find t_relay so I know that the tm module is loaded
and exists, when I do nm on the module I see the symbol t_relay_to in
there as well??? # attempt handoff to PSTN if (uri=~"^sip:9[0-9]*@.*") {
log("Forwarding to PSTN\n"); t_relay_to( "192.168.0.2",
"5060"); break;
};
------------------------------------------------------------------------
-------------------------------
This email, and any files transmitted with it, is copyright and may
contain confidential information. The contents are intended for the use
of the addressee(s) only. Unauthorized use may be unlawful. If you
receive this email by mistake, please advise sender immediately. The
views of the author may not necessarily constitute the views of Telco
Electronics Limited. Nothing in this mail shall bind Telco Electronics
Limited in any contract or obligation.
Telco Electronics Limited
6-8 Oxford Court
Brackley
Northants
NN13 7XY
Tel 07000 701999
Fax 07000 701777
28 Mar
28 Mar
8:47 p.m.
Because it is often necessary to force an explicit transport protocol.
If you don't want to do this then you can also rewrite the Request-URI
and forward using t_relay().
Jan.
On 15-03 10:36, Stephen James wrote:
Ok. that seems to work. But why? Do I need to place a
t_relay_to_udp
and t_relay_to_tcp with logic.
-----Original Message-----
From: Alan Litster [mailto:alitster@telcoelectronics.co.uk]
Sent: Monday, March 15, 2004 9:59 AM
To: Stephen James; SER Mailing List
Subject: RE: [Serusers] t_relay_to
Try t_relay_to_udp !
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of Stephen James
Sent: 15 March 2004 15:54
To: serusers(a)lists.iptel.org
Subject: [Serusers] t_relay_to
I attempted to implement the code in the example for PSTN gateway where
after matching the enum in the user portion of the uri it uses
t_relay_to. When I implement this I get unable to find t_relay_to in the
startup of ser. It find t_relay so I know that the tm module is loaded
and exists, when I do nm on the module I see the symbol t_relay_to in
there as well??? # attempt handoff to PSTN if (uri=~"^sip:9[0-9]*@.*") {
log("Forwarding to PSTN\n"); t_relay_to( "192.168.0.2",
"5060"); break;
};
------------------------------------------------------------------------
-------------------------------
This email, and any files transmitted with it, is copyright and may
contain confidential information. The contents are intended for the use
of the addressee(s) only. Unauthorized use may be unlawful. If you
receive this email by mistake, please advise sender immediately. The
views of the author may not necessarily constitute the views of Telco
Electronics Limited. Nothing in this mail shall bind Telco Electronics
Limited in any contract or obligation.
Telco Electronics Limited
6-8 Oxford Court
Brackley
Northants
NN13 7XY
Tel 07000 701999
Fax 07000 701777
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7544
days inactive
7557
days old
4 comments
4 participants
participants (4)
-
Alan Litster -
Bogdan-Andrei IANCU -
Jan Janak -
Stephen James