Hi buddies, I installed RTC Client to my win2000 server. i was trying to test PC-PHONE using my SIP Gatekeeper with RTCSampleVB. But i found that in register packets it is sending local computer name and user. how i can change in code so it should be sent what we defined. I am going to paste the log of my gatekeeper which received from RTCSampleVB. Wed Aug 17 13:56:20 2005 local address xxx.xxx.xxx.xxx:5060; receive from xxx.xxx.xxx.xxx:20851 SIP INVITE { call ID: ae2a83ac-fc9f-4325-a02c-88cdfc371136(a)10.0.0.2 } { INVITE sip:915544261065@xxx.xxx.xxx.xxx;user=1212 SIP/2.0 Via: SIP/2.0/UDP 82.148.101.241:29718 From: "Administrator" <sip:PROGRAMMING>;tag=e983502c-9d9c-442e-ac3b-d58bef286a0b To: <sip:915544261065@xxx.xxx.xxx.xxx;user=1212> Call-ID: ae2a83ac-fc9f-4325-a02c-88cdfc371136(a)10.0.0.2 CSeq: 1 INVITE Contact: <sip:xxx.xxx.xxx.xxx:29718> User-Agent: Windows RTC/1.0 Content-Type: application/sdp Content-Length: 278 v=0 o=Administrator 0 0 IN IP4 82.148.101.241 s=session c=IN IP4 xxx.xxx.xxx.xxx b=CT:1000 t=0 0 m=audio 18644 RTP/AVP 97 0 8 4 101 a=rtpmap:97 red/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:4 G723/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 } if you check in log packet the FROM field. From: "Administrator" <sip:PROGRAMMING>;tag=e983502c-9d9c-442e-ac3b-d58bef286a0b i tested without NAT and firwall, but same problem. mypc name is PROGRAMMING and user is Administrator. Which i want to keep it open so i can send what i need. Please let me know if someone is done any SIP dialer using RTC? Thank You Yours, Abdul Lateef Computer Programmer HATIF COM Mob: +974 - 5405022 Tel: +974 - 4883068 ICQ: 276994704 YM!: abdul_zu Fax: +974 - 4883063 Doha Qatar http://www.hatif.com ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs