Here my config file

# # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"test.com") {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("test.com", "subscriber")) { www_challenge("test.com", "0"); break; };

save("location"); break; }; lookup("aliases"); # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

}

----- Original Message ----- From: "Barry Murphy" barry@unix.co.nz To: tesastac@tesas.com; "'harry gaillac'" gaillacharry@yahoo.fr; serusers@lists.iptel.org Sent: Saturday, April 09, 2005 12:37 PM Subject: RE: [Serusers]sending IM...

Show me you config please, I had a simular problem looping.

Barry

-----Original Message----- From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of tesastac@tesas.com Sent: Tuesday, 5 April 2005 2:27 a.m. To: harry gaillac; serusers@lists.iptel.org Subject: Re: [Serusers]sending IM...

I mean i followed the instructions in "SER How To" and it has been working as described, but when i try to send an IM i get the error "483 Too many hoops" what's wrong there?

I'm a new SER user, so I don't know how to configure it exactly, is it necessary additional configurations?

thanks for your interest...

----- Original Message ----- From: "harry gaillac" gaillacharry@yahoo.fr To: "Erdem HAKI" erdemh@tesas.com Sent: Monday, April 04, 2005 4:53 PM Subject: Re: [Serusers]sending IM...

...

hello Could you explain me how serweb works properly !?? Harry --- Erdem HAKI erdemh@tesas.com wrote:

...

Hello,

I set up serweb and it works properly, but when I try to send IM to another user, "483 Too many hoops" appears.What is the problem?

Thanks.>

---

...

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

---

Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de

stockage pour vos

...

mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers