Hi Franz, Sorry for troubling you again, But thank you so much for your response. I have modified as suggested, still getting same error. Please find attached files and suggest me any more changes has to be done. Thanks in advance!! Regards, Sainath From: Franz Edler [mailto:franz.edler@technikum-wien.at] Sent: Monday, February 1, 2016 11:59 PM To: Sainath Ellendula (NEP) &lt;sainath.ellendula(a)wipro.com&gt; Cc: basitstar(a)hotmail.com; sr-users(a)lists.sip-router.org Subject: RE: Re:[SR-Users] Kamailio IMS deployment Hi Sainath, it is always good to read the error-messages . The ERROR de.fhg.fokus.diameter.DiameterPeer.peer.StateMachine - I_Snd_Conn_Req StateMachine: Peer icscf.net1.test:3869 not responding to connection attempt shows that there is no connectivity towards iscsf and scscf. This is typically the case when you start HSS and icscf and scscf are not already running. This errors you will always have because either you start HSS first (see error above) or you start icscf and scscf first. Then you will get similar error messages from icscf and scscf. The ERROR: cdp [peerstatemachine.c:635]: I_Snd_CER(): I_Snd_CER(): Error on finding local host address > Socket operation on non-socket shows that the local host address cannot be found. Look into the xml-files that define the parameters for the diameter connection (icscf.xml and scscf.xml). Both files define the FQDN of the diameter peer. I guess you did not modify the DNS file when you have changed the IP-address of I-CSCF and S-CSCF. Modify the zone-files accordingly. Then I expect that the error will disappear. The firs warning WARN org.apache.catalina.connector.MapperListener - registerEngine Unknown default host: 10.0.0.9 I do not know, what it means. It is not critical. I live with that since the beginning. Maybe you can explain it to me sometimes . I am not a Tomcat expert. BR Franz . From: sainath.ellendula@wipro.com<mailto:sainath.ellendula@wipro.com> [mailto:sainath.ellendula@wipro.com] Sent: Monday, February 1, 2016 8:22 AM To: franz.edler@technikum-wien.at<mailto:franz.edler@technikum-wien.at> Cc: basitstar@hotmail.com<mailto:basitstar@hotmail.com>; sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> Subject: RE: Re:[SR-Users] Kamailio IMS deployment Hi Franz, Thank you so much for your response. As suggested modified changes and don't observe connection refused error. After modification few more errors observed. Detailed errors as below. 10.0.0.9 /catalina-optional.jar:lib/catalina.jar:lib/c3p0-0.9.1.jar:lib/base64.jar:lib/asm.jar:lib/asm-attrs.jar:lib/antlr-2.7.6.jar::log4j.properties:.. 2016-02-01 12:09:28,371 INFO de.fhg.fokus.hss.main.TomcatServer - startTomcat Tomcat-Server is started. 2016-02-01 12:09:29,301 WARN org.apache.catalina.connector.MapperListener - registerEngine Unknown default host: 10.0.0.9 2016-02-01 12:09:30,294 INFO de.fhg.fokus.hss.web.servlet.ResponseFilter - init Response Filter Initialisation! 2016-02-01 12:09:31,251 INFO de.fhg.fokus.hss.main.TomcatServer - startTomcat WebConsole of FHoSS was started ! 2016-02-01 12:09:34,813 WARN org.hibernate.impl.SessionFactoryObjectFactory - addInstance InitialContext did not implement EventContext 2016-02-01 12:09:34,847 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - <init> Bean style constructor called, don't forget to configure! 2016-02-01 12:09:34,851 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure FQDN: hss.net1.test 2016-02-01 12:09:34,852 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure Realm: net1.test 2016-02-01 12:09:34,853 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure Vendor_ID : 10415 2016-02-01 12:09:34,854 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure Product Name: JavaDiameterPeer 2016-02-01 12:09:34,854 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure AcceptUnknwonPeers: true 2016-02-01 12:09:34,855 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure DropUnknownOnDisconnect: true 2016-02-01 12:09:34,864 INFO de.fhg.fokus.hss.main.HSSContainer - waitForExit Type "exit" to stop FHoSS! 2016-02-01 12:09:34,873 ERROR de.fhg.fokus.diameter.DiameterPeer.peer.StateMachine - I_Snd_Conn_Req StateMachine: Peer icscf.net1.test:3869 not responding to connection attempt 2016-02-01 12:09:34,876 ERROR de.fhg.fokus.diameter.DiameterPeer.peer.StateMachine - I_Snd_Conn_Req StateMachine: Peer scscf.net1.test:3870 not responding to connection attempt 10.0.0.10 root@server:~# kamailio -f /usr/local/etc/kamailio/kamailio-pcscf.cfg loading modules under config path: /usr/local/lib64/kamailio/modules/ 0(1856) INFO: <core> [sctp_core.c:75]: sctp_core_check_support(): SCTP API not enabled - if you want to use it, load sctp module Listening on udp: pcscf.net1.test [10.0.0.10]:4060 Aliases: *: pcscf.net1.test:* WARNING: no fork mode 0(1856) INFO: rr [../outbound/api.h:54]: ob_load_api(): Failed to import bind_ob 0(1856) INFO: rr [rr_mod.c:174]: mod_init(): outbound module not available 0(1856) INFO: ims_usrloc_pcscf [hslot.c:62]: ul_init_locks(): locks array size 512 0(1856) INFO: <core> [udp_server.c:150]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992 0(1856) INFO: <core> [udp_server.c:200]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984 0(1856) WARNING: ims_usrloc_pcscf [usrloc_db.c:59]: connect_db(): DB connection already open... continuing 0(1856) INFO: <script>: [REGISTER] from [sip:alice@net1.test] to [sip:alice@net1.test] 0(1856) ERROR: <script>: REGISTER (sip:alice@net1.test (10.0.0.8:55859) to sip:alice@net1.test, aaeacddd-376e-4a63-5745-2757d1b9a29d) 10.0.0.11 9(1870) WARNING: cdp [tcp_accept.c:123]: create_socket(): create_socket(): Trying to open/bind/listen on 10.0.0.11 port 3869 9(1870) WARNING: cdp [tcp_accept.c:148]: create_socket(): create_socket(): Successful socket open/bind/listen on 10.0.0.11 port 3869 9(1870) INFO: cdp [acceptor.c:96]: acceptor_process(): Acceptor opened sockets. Entering accept loop ... 10(1871) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0 10(1871) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test 10(1871) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868 10(1871) INFO: cdp [receiver.c:932]: peer_connect(): peer_connect(): Peer hss.net1.test:3868 connected 8(1869) ERROR: cdp [peerstatemachine.c:635]: I_Snd_CER(): I_Snd_CER(): Error on finding local host address > Socket operation on non-socket 10(1871) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 6 10(1871) WARNING: cdp [peermanager.c:315]: peer_timer(): Inactivity on peer [hss.net1.test], sending DWR... - if we don't get a reply, the peer will be closed 10.0.0.12 9(1883) WARNING: cdp [tcp_accept.c:123]: create_socket(): create_socket(): Trying to open/bind/listen on 10.0.0.12 port 3870 9(1883) WARNING: cdp [tcp_accept.c:148]: create_socket(): create_socket(): Successful socket open/bind/listen on 10.0.0.12 port 3870 9(1883) INFO: cdp [acceptor.c:96]: acceptor_process(): Acceptor opened sockets. Entering accept loop ... 7(1881) INFO: cdp [receiver.c:445]: receiver_process(): receiver_process(): [] Receiver process doing init on new process... 7(1881) INFO: cdp [receiver.c:450]: receiver_process(): receiver_process(): [] Receiver process starting up... 10(1884) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0 10(1884) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test 10(1884) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868 10(1884) INFO: cdp [receiver.c:932]: peer_connect(): peer_connect(): Peer hss.net1.test:3868 connected 8(1882) ERROR: cdp [peerstatemachine.c:635]: I_Snd_CER(): I_Snd_CER(): Error on finding local host address > Socket operation on non-socket 10(1884) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 6 10(1884) WARNING: cdp [peermanager.c:315]: peer_timer(): Inactivity on peer [hss.net1.test], sending DWR... - if we don't get a reply, the peer will be closed 10(1884) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 6 Could you please guide me here. Any suggestions would be very helpful. Thanks in advance!! Regards, Sainath -----Original Message----- From: Franz Edler [mailto:franz.edler@technikum-wien.at] Sent: Saturday, January 30, 2016 1:27 PM To: Sainath Ellendula (WT01 - NEP) <sainath.ellendula@wipro.com<mailto:sainath.ellendula@wipro.com>>; basitstar@hotmail.com<mailto:basitstar@hotmail.com>; sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> Subject: RE: [SR-Users] Kamailio IMS deployment Hi, Now it seems to be clear to me where the problem might come from: I have restricted access to mysql server to address 10.0.0.9 only. You have to change the bind-address statement in /etc/mysql.cnf accordingly. See: http://dev.mysql.com/doc/refman/5.7/en/server-options.html#option_mysqld_bi… Change the address to "*" or to 0.0.0.0. BR Franz _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com<http://www.wipro.com> The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

Hi Franz, Thank you for response. Modified everything as suggested, Still getting the same issue. Please find the tail -f /var/log/syslog It looks good. Ping is happening. root@server:/etc/init.d# tail -f /var/log/syslog Feb 8 14:39:57 server named[1615]: zone 127.in-addr.arpa/IN: loaded serial 1 Feb 8 14:39:57 server named[1615]: zone net1.test/IN: loaded serial 2010081401 Feb 8 14:39:57 server named[1615]: zone localhost/IN: loaded serial 2 Feb 8 14:39:57 server named[1615]: zone 255.in-addr.arpa/IN: loaded serial 1 Feb 8 14:39:57 server named[1615]: zone net2.test/IN: loaded serial 2010081401 Feb 8 14:39:57 server named[1615]: all zones loaded Feb 8 14:39:57 server named[1615]: running Feb 8 14:39:57 server named[1615]: zone 0.0.10.in-addr.arpa/IN: sending notifies (serial 2010081401) Feb 8 14:39:57 server named[1615]: zone net1.test/IN: sending notifies (serial 2010081401) Feb 8 14:39:57 server named[1615]: zone net2.test/IN: sending notifies (serial 2010081401) My files: vi /opt/OpenIMSCore/FHoSS/deploy/DiameterPeerHSS.xml <?xml version="1.0" encoding="UTF-8"?<!-- HSS Server config --<DiameterPeer FQDN="hss.net1.test" Realm="net1.test" Vendor_Id="10415" Product_Name="JavaDiameterPeer" AcceptUnknownPeers="1" DropUnknownOnDisconnect="1" Tc="30" Workers="4" QueueLength="32" <Peer FQDN="icscf.net1.test" Realm="net1.test" port="3869" / <Peer FQDN="scscf.net1.test" Realm="net1.test" port="3870" / <Acceptor port="3868" bind="10.0.0.9" / <Auth id="16777216" vendor="10415"/><!-- 3GPP Cx -- <Auth id="16777216" vendor="4491"/><!-- CableLabs Cx -- <Auth id="16777216" vendor="13019"/><!-- ETSI/TISPAN Cx -- <Auth id="16777216" vendor="0"/><!-- ETSI/TISPAN Cx -- <Auth id="16777217" vendor="10415"/><!-- 3GPP Sh -- <Auth id="16777221" vendor="10415"/ </DiameterPeer Vi /usr/local/etc/Kamailio/ icscf.xml <?xml version="1.0" encoding="UTF-8"?<DiameterPeer FQDN="icscf.net1.test" Realm="net1.test" Vendor_Id="10415" Product_Name="CDiameterPeer" AcceptUnknownPeers="1" DropUnknownOnDisconnect="1" Tc="30" Workers="4" QueueLength="8" TransactionTimeout="5" SessionsHashSize="128" DefaultAuthSessionTimeout="3600" MaxAuthSessionTimeout="3600" <Peer FQDN="hss.net1.test" Realm="net1.test" port="3868"/ <Acceptor port="3869" bind="10.0.0.11"/ <Auth id="16777216" vendor="10415"/> <!--3GPP CxDX -- <DefaultRoute FQDN="hss.net1.test" metric="10"/</DiameterPeer Vi /usr/local/etc/Kamailio/ scscf.xml <?xml version="1.0" encoding="UTF-8"?<DiameterPeer FQDN="scscf.net1.test" Realm="net1.test" Vendor_Id="10415" Product_Name="CDiameterPeer" AcceptUnknownPeers="1" DropUnknownOnDisconnect="1" Tc="30" Workers="4" QueueLength="8" TransactionTimeout="5" SessionsHashSize="128" DefaultAuthSessionTimeout="3600" MaxAuthSessionTimeout="3600" <Peer FQDN="hss.net1.test" Realm="net1.test" port="3868"/ <Acceptor port="3870" bind="10.0.0.12"/ <Auth id="16777216" vendor="10415"/><!-- 3GPP Cx -- <Auth id="4" vendor="10415"/> <!--3GPP Ro -- <DefaultRoute FQDN="hss.net1.test" metric="10"/ </DiameterPeer vi /etc/resolv.conf domain net1.test search net1.test nameserver server.net1.test vi /etc/bind/named_conf.options options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. forwarders { //0.0.0.0; 10.0.0.9; 10.0.0.10; 10.0.0.11; 10.0.0.12; // my home router // 195.202.138.3; 195.202.128.3; // DNS-servers kabelsignal // 10.127.0.11; 10.128.0.12; // DNS-servers FH Technikum-Wien - must be used within FH intranet }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation no; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; Please guide me any more changes has to be done.. I could not find the path for log file(syslog.conf) to increase the debug level. Thanks in advance!! Regards, Sainath From: Franz Edler [mailto:franz.edler@technikum-wien.at] Sent: Thursday, February 4, 2016 10:48 PM To: Sainath Ellendula (NEP) &lt;sainath.ellendula(a)wipro.comCc: basitstar(a)hotmail.com; sr-users(a)lists.sip-router.org Subject: RE: Re:[SR-Users] Kamailio IMS deployment You did not modify the reverse zone-file, just to be consistent. I see you have assigned 10.0.0.10 to P-CSCF. This address I used for my notebook (VMware host). After your zone-file modifications you should check it e.g. with ping. If that does not solve the issue (I assume) then increase the debug level to see what happens in peerstatemachine.c:635. You can write it in a logfile and send. BR From: sainath.ellendula@wipro.com<mailto:sainath.ellendula@wipro.com> [mailto:sainath.ellendula@wipro.com] Sent: Wednesday, February 3, 2016 12:43 PM To: franz.edler@technikum-wien.at<mailto:franz.edler@technikum-wien.atCc: basitstar@hotmail.com<mailto:basitstar@hotmail.com>; sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.orgSubject: RE: Re:[SR-Users] Kamailio IMS deployment Hi Franz, Sorry for troubling you again, But thank you so much for your response. I have modified as suggested, still getting same error. Please find attached files and suggest me any more changes has to be done. Thanks in advance!! Regards, Sainath From: Franz Edler [mailto:franz.edler@technikum-wien.at] Sent: Monday, February 1, 2016 11:59 PM To: Sainath Ellendula (NEP) <sainath.ellendula@wipro.com<mailto:sainath.ellendula@wipro.com>Cc: basitstar@hotmail.com<mailto:basitstar@hotmail.com>; sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.orgSubject: RE: Re:[SR-Users] Kamailio IMS deployment Hi Sainath, it is always good to read the error-messages . The ERROR de.fhg.fokus.diameter.DiameterPeer.peer.StateMachine - I_Snd_Conn_Req StateMachine: Peer icscf.net1.test:3869 not responding to connection attempt shows that there is no connectivity towards iscsf and scscf. This is typically the case when you start HSS and icscf and scscf are not already running. This errors you will always have because either you start HSS first (see error above) or you start icscf and scscf first. Then you will get similar error messages from icscf and scscf. The ERROR: cdp [peerstatemachine.c:635]: I_Snd_CER(): I_Snd_CER(): Error on finding local host address > Socket operation on non-socket shows that the local host address cannot be found. Look into the xml-files that define the parameters for the diameter connection (icscf.xml and scscf.xml). Both files define the FQDN of the diameter peer. I guess you did not modify the DNS file when you have changed the IP-address of I-CSCF and S-CSCF. Modify the zone-files accordingly. Then I expect that the error will disappear. The firs warning WARN org.apache.catalina.connector.MapperListener - registerEngine Unknown default host: 10.0.0.9 I do not know, what it means. It is not critical. I live with that since the beginning. Maybe you can explain it to me sometimes . I am not a Tomcat expert. BR Franz . From: sainath.ellendula@wipro.com<mailto:sainath.ellendula@wipro.com> [mailto:sainath.ellendula@wipro.com] Sent: Monday, February 1, 2016 8:22 AM To: franz.edler@technikum-wien.at<mailto:franz.edler@technikum-wien.atCc: basitstar@hotmail.com<mailto:basitstar@hotmail.com>; sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.orgSubject: RE: Re:[SR-Users] Kamailio IMS deployment Hi Franz, Thank you so much for your response. As suggested modified changes and don't observe connection refused error. After modification few more errors observed. Detailed errors as below. 10.0.0.9 /catalina-optional.jar:lib/catalina.jar:lib/c3p0-0.9.1.jar:lib/base64.jar:lib/asm.jar:lib/asm-attrs.jar:lib/antlr-2.7.6.jar::log4j.properties:.. 2016-02-01 12:09:28,371 INFO de.fhg.fokus.hss.main.TomcatServer - startTomcat Tomcat-Server is started. 2016-02-01 12:09:29,301 WARN org.apache.catalina.connector.MapperListener - registerEngine Unknown default host: 10.0.0.9 2016-02-01 12:09:30,294 INFO de.fhg.fokus.hss.web.servlet.ResponseFilter - init Response Filter Initialisation! 2016-02-01 12:09:31,251 INFO de.fhg.fokus.hss.main.TomcatServer - startTomcat WebConsole of FHoSS was started ! 2016-02-01 12:09:34,813 WARN org.hibernate.impl.SessionFactoryObjectFactory - addInstance InitialContext did not implement EventContext 2016-02-01 12:09:34,847 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - <init> Bean style constructor called, don't forget to configure! 2016-02-01 12:09:34,851 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure FQDN: hss.net1.test 2016-02-01 12:09:34,852 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure Realm: net1.test 2016-02-01 12:09:34,853 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure Vendor_ID : 10415 2016-02-01 12:09:34,854 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure Product Name: JavaDiameterPeer 2016-02-01 12:09:34,854 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure AcceptUnknwonPeers: true 2016-02-01 12:09:34,855 INFO de.fhg.fokus.diameter.DiameterPeer.DiameterPeer - configure DropUnknownOnDisconnect: true 2016-02-01 12:09:34,864 INFO de.fhg.fokus.hss.main.HSSContainer - waitForExit Type "exit" to stop FHoSS! 2016-02-01 12:09:34,873 ERROR de.fhg.fokus.diameter.DiameterPeer.peer.StateMachine - I_Snd_Conn_Req StateMachine: Peer icscf.net1.test:3869 not responding to connection attempt 2016-02-01 12:09:34,876 ERROR de.fhg.fokus.diameter.DiameterPeer.peer.StateMachine - I_Snd_Conn_Req StateMachine: Peer scscf.net1.test:3870 not responding to connection attempt 10.0.0.10 root@server:~# kamailio -f /usr/local/etc/kamailio/kamailio-pcscf.cfg loading modules under config path: /usr/local/lib64/kamailio/modules/ 0(1856) INFO: <core> [sctp_core.c:75]: sctp_core_check_support(): SCTP API not enabled - if you want to use it, load sctp module Listening on udp: pcscf.net1.test [10.0.0.10]:4060 Aliases: *: pcscf.net1.test:* WARNING: no fork mode 0(1856) INFO: rr [../outbound/api.h:54]: ob_load_api(): Failed to import bind_ob 0(1856) INFO: rr [rr_mod.c:174]: mod_init(): outbound module not available 0(1856) INFO: ims_usrloc_pcscf [hslot.c:62]: ul_init_locks(): locks array size 512 0(1856) INFO: <core> [udp_server.c:150]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992 0(1856) INFO: <core> [udp_server.c:200]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984 0(1856) WARNING: ims_usrloc_pcscf [usrloc_db.c:59]: connect_db(): DB connection already open... continuing 0(1856) INFO: <script>: [REGISTER] from [sip:alice@net1.test] to [sip:alice@net1.test] 0(1856) ERROR: <script>: REGISTER (sip:alice@net1.test (10.0.0.8:55859) to sip:alice@net1.test, aaeacddd-376e-4a63-5745-2757d1b9a29d) 10.0.0.11 9(1870) WARNING: cdp [tcp_accept.c:123]: create_socket(): create_socket(): Trying to open/bind/listen on 10.0.0.11 port 3869 9(1870) WARNING: cdp [tcp_accept.c:148]: create_socket(): create_socket(): Successful socket open/bind/listen on 10.0.0.11 port 3869 9(1870) INFO: cdp [acceptor.c:96]: acceptor_process(): Acceptor opened sockets. Entering accept loop ... 10(1871) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0 10(1871) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test 10(1871) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868 10(1871) INFO: cdp [receiver.c:932]: peer_connect(): peer_connect(): Peer hss.net1.test:3868 connected 8(1869) ERROR: cdp [peerstatemachine.c:635]: I_Snd_CER(): I_Snd_CER(): Error on finding local host address > Socket operation on non-socket 10(1871) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 6 10(1871) WARNING: cdp [peermanager.c:315]: peer_timer(): Inactivity on peer [hss.net1.test], sending DWR... - if we don't get a reply, the peer will be closed 10.0.0.12 9(1883) WARNING: cdp [tcp_accept.c:123]: create_socket(): create_socket(): Trying to open/bind/listen on 10.0.0.12 port 3870 9(1883) WARNING: cdp [tcp_accept.c:148]: create_socket(): create_socket(): Successful socket open/bind/listen on 10.0.0.12 port 3870 9(1883) INFO: cdp [acceptor.c:96]: acceptor_process(): Acceptor opened sockets. Entering accept loop ... 7(1881) INFO: cdp [receiver.c:445]: receiver_process(): receiver_process(): [] Receiver process doing init on new process... 7(1881) INFO: cdp [receiver.c:450]: receiver_process(): receiver_process(): [] Receiver process starting up... 10(1884) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0 10(1884) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test 10(1884) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868 10(1884) INFO: cdp [receiver.c:932]: peer_connect(): peer_connect(): Peer hss.net1.test:3868 connected 8(1882) ERROR: cdp [peerstatemachine.c:635]: I_Snd_CER(): I_Snd_CER(): Error on finding local host address > Socket operation on non-socket 10(1884) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 6 10(1884) WARNING: cdp [peermanager.c:315]: peer_timer(): Inactivity on peer [hss.net1.test], sending DWR... - if we don't get a reply, the peer will be closed 10(1884) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 6 Could you please guide me here. Any suggestions would be very helpful. Thanks in advance!! Regards, Sainath -----Original Message----- From: Franz Edler [mailto:franz.edler@technikum-wien.at] Sent: Saturday, January 30, 2016 1:27 PM To: Sainath Ellendula (WT01 - NEP) <sainath.ellendula@wipro.com<mailto:sainath.ellendula@wipro.com>>; basitstar@hotmail.com<mailto:basitstar@hotmail.com>; sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.orgSubject: RE: [SR-Users] Kamailio IMS deployment Hi, > As suggested, modified the changes in icscf.xml and scscf.xml files, PFA > modified files. > Still getting few errors .... Now it seems to be clear to me where the problem might come from: I have restricted access to mysql server to address 10.0.0.9 only. You have to change the bind-address statement in /etc/mysql.cnf accordingly. See: http://dev.mysql.com/doc/refman/5.7/en/server-options.html#option_mysqld_bi… Change the address to "*" or to 0.0.0.0. BR Franz _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com<http://www.wipro.comThe information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com<http://www.wipro.comThe information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

Hi Franz, Please find ping status and seems good. root@server:~# ping -c 1 hss.net1.test PING hss.net1.test (10.0.0.9) 56(84) bytes of data. 64 bytes from server.net1.test (10.0.0.9): icmp_seq=1 ttl=64 time=0.017 ms --- hss.net1.test ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.017/0.017/0.017/0.000 ms root@server:~# ping -c 1 pcscf.net1.test PING pcscf.net1.test (10.0.0.10) 56(84) bytes of data. 64 bytes from server.net1.test (10.0.0.10): icmp_seq=1 ttl=64 time=0.020 ms --- pcscf.net1.test ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.020/0.020/0.020/0.000 ms root@server:~# ping -c 1 icscf.net1.test PING icscf.net1.test (10.0.0.11) 56(84) bytes of data. 64 bytes from server.net1.test (10.0.0.11): icmp_seq=1 ttl=64 time=0.018 ms --- icscf.net1.test ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.018/0.018/0.018/0.000 ms root@server:~# ping -c 1 scscf.net1.test PING scscf.net1.test (10.0.0.12) 56(84) bytes of data. 64 bytes from server.net1.test (10.0.0.12): icmp_seq=1 ttl=64 time=0.017 ms --- scscf.net1.test ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.017/0.017/0.017/0.000 ms root@server:~# Seems Some progress happened: Tried register using Boghe IMS client and observed few errors: 0(1445) INFO: <script>: [REGISTER] from [sip:alice@net1.test] to [sip:alice@net1.test] 0(1445) ERROR: <script>: REGISTER (sip:alice@net1.test (10.0.0.8:55280) to sip:alice@net1.test, 2006cdca-0076-bacb-5010-bffa714b3cdb) 0(1445) DEBUG: <core> [parser/msg_parser.c:153]: get_hdr_field(): get_hdr_field: cseq <CSeq>: <7994> <REGISTER> 0(1445) DEBUG: <core> [parser/msg_parser.c:187]: get_hdr_field(): DEBUG: get_hdr_body : content_length=0 0(1445) DEBUG: maxfwd [mf_funcs.c:85]: is_maxfwd_present(): value = 70 0(1445) DEBUG: <core> [parser/msg_parser.c:89]: get_hdr_field(): found end of header 0(1445) DEBUG: sanity [mod_sanity.c:248]: w_sanity_check(): sanity checks result: 1 0(1445) DEBUG: siputils [checks.c:97]: has_totag(): no totag 0(1445) DEBUG: <core> [select.c:412]: run_select(): Calling SELECT 0x7fb548dd2400 0(1445) DEBUG: tm [t_lookup.c:1011]: t_check_msg(): DEBUG: t_check_msg: msg id=2 global id=1 T start=0xffffffffffffffff 0(1445) DEBUG: tm [t_lookup.c:466]: t_lookup_request(): t_lookup_request: start searching: hash=65064, isACK=0 0(1445) DEBUG: tm [t_lookup.c:424]: matching_3261(): DEBUG: RFC3261 transaction matching failed 0(1445) DEBUG: tm [t_lookup.c:648]: t_lookup_request(): DEBUG: t_lookup_request: no transaction found 0(1445) DEBUG: tm [t_lookup.c:1080]: t_check_msg(): DEBUG: t_check_msg: msg id=2 global id=2 T end=(nil) 0(1445) DEBUG: sl [sl.c:280]: send_reply(): reply in stateless mode (sl) 0(1445) DEBUG: siputils [checks.c:97]: has_totag(): no totag 0(1445) DEBUG: tm [t_lookup.c:1011]: t_check_msg(): DEBUG: t_check_msg: msg id=2 global id=2 T start=(nil) 0(1445) DEBUG: tm [t_lookup.c:1086]: t_check_msg(): DEBUG: t_check_msg: T previously sought and not found 0(1445) DEBUG: ims_registrar_pcscf [save.c:273]: save_pending(): contact requesting to expire in 600000 seconds 0(1445) DEBUG: ims_usrloc_pcscf [usrloc.c:106]: get_alias_host_from_contact(): no alias param 0(1445) DEBUG: ims_usrloc_pcscf [usrloc.c:155]: get_hash_slot(): using host for hash [10.0.0.8] 0(1445) DEBUG: ims_usrloc_pcscf [usrloc.c:159]: get_hash_slot(): Returning hash slot: [167] 0(1445) DEBUG: ims_usrloc_pcscf [udomain.c:465]: get_pcontact(): Searching for contact in P-CSCF usrloc [sip:alice@10.0.0.8:55280;transport=udp] 0(1445) DEBUG: ims_usrloc_pcscf [usrloc.c:106]: get_alias_host_from_contact(): no alias param 0(1445) DEBUG: ims_usrloc_pcscf [usrloc.c:183]: get_aor_hash(): using host for hash [10.0.0.8] 0(1445) DEBUG: ims_usrloc_pcscf [usrloc.c:187]: get_aor_hash(): Returning hash slot: [1662767783] 0(1445) DEBUG: ims_usrloc_pcscf [udomain.c:483]: get_pcontact(): Comparing needle user@host:port [alice@10.0.0.8:55280] and contact_user@contact_host:port [alice@10.0.0.8:51219] 0(1445) DEBUG: ims_usrloc_pcscf [udomain.c:494]: get_pcontact(): Searching for [sip:alice@10.0.0.8:55280;transport=udp] and comparing to [sip:alice@10.0.0.8:51219;transport=udp] 0(1445) DEBUG: ims_usrloc_pcscf [udomain.c:553]: get_pcontact(): Port don't match: 51219 (contact) 51219 (received) != 55280! 0(1445) DEBUG: ims_registrar_pcscf [save.c:310]: save_pending(): Adding pending pcontact: <sip:alice@10.0.0.8:55280;transport=udp> 0(1445) DEBUG: ims_usrloc_pcscf [pcontact.c:132]: new_pcontact(): New contact [<sip:alice@10.0.0.8:55280;transport=udp>] with 0 associated IMPUs in state: [registration pending] 0(1445) DEBUG: ims_registrar_pcscf [save.c:314]: save_pending(): registering for UL callback 0(1445) DEBUG: ims_usrloc_pcscf [usrloc.c:106]: get_alias_host_from_contact(): no alias param Please guide me for any more changes has to be done, As observed in Wireshark(Register request from 10.0.0.8(host)-PCSCF as REGISTER sip:net1.test SIP/2.0). I think the register request should sent as REGISTER sip:alice@net1.test SIP/2.0 Thanks in advance!! Regards, Sainath From: Franz Edler [mailto:franz.edler@technikum-wien.at] Sent: Tuesday, February 9, 2016 3:00 AM To: Sainath Ellendula (NEP) &lt;sainath.ellendula(a)wipro.com&gt; Cc: basitstar(a)hotmail.com; sr-users(a)lists.sip-router.org Subject: RE: Re:[SR-Users] Kamailio IMS deployment Sainath, what was the result for ping on - icsct.net1.test - scscf.net1.test - hss.net1.test to increase debug level you have to modify the corresponding cfg-file, e.g. kamailio-icscf.cfg in line 35: debug=2 Just increase to debug=3 and then start the process again. BR Franz The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com