Hi 5.6.4 I'm trying to add uacreg logic to my setup. When I add a new entry via rpc I see that the reg is stored in mem but not inserted in the database for persistency. My uac params are like this: modparam("uac", "reg_db_url",DBURL) modparam("uac", "reg_timer_interval", 900) modparam("uac", "reg_retry_interval", 10) modparam("uac", "reg_random_delay", 0) modparam("uac", "reg_hash_size", 12) ## 5.6 modparam("uac", "reg_db_table", "kam_uacreg") modparam("uac", "reg_contact_addr", "192.168.255.254:5060") #Won't be used #modparam("uac", "default_socket", "udp:192.168.0.125:5060") #Won't be used modparam("uac", "reg_keep_callid", 1) modparam("uac", "reg_active", 1) modparam("uac", "reg_gc_interval", 30) modparam("uac", "reg_use_domain", 0) I'm used to add via rpc and have db persistency. Like for exmaple using the domain module. Is this a bug in my config or does this module behave different? Should I insert in the db and call to enable via RPC? If so, what would be the best way to enable only the new inserted register instead of reloading all the regs? It's expected to have many changes and do not want to have full reloads all the time. cheers, Jon -- PekePBX, the multitenant PBX solution https://pekepbx.com