31 Mar
2016
31 Mar
'16
4:34 a.m.
Hi
Im trying to modify example for Asterisk/Kamailio integration that miconda
did, and trying to handle Forwarded register to Asterisk in an
authenticated way instead removing secret in asterisk.
I have made this changes
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $var(astip);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" + $var(astport);
$uac_req(furi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
$uac_req(turi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport) +
">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$hdr(Expires) + "\r\n";
xlog("Dentro de REGFWD");
t_on_failure("REG_AST");
uac_req_send();
}
failure_route[REG_AST] {
if (t_is_canceled()) {
exit;
}
xlog("Dentro de REG AST");
if(t_check_status("401|407")) {
xlog("Dentro de 401");
$avp(auser) = "test";
$avp(apass) = "test";
uac_auth();
t_relay();
exit;
}
}
What i see on traces:
U x.x.x..240:5060 -> x.x.x..56:5060
REGISTER sip:x.x.x.56:5060 SIP/2.0.
Via: SIP/2.0/UDP
x.x.x.240;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0.
To: <sip:200@x.x.x.56>.
From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
CSeq: 10 REGISTER.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
Max-Forwards: 70.
Content-Length: 0.
User-Agent: ANY.
Contact: <sip:emp_001_200@x.x.x.240:5060>.
Expires: 3600.
.
#
U x.x.x.56:5060 -> x.x.x..240:5060
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP x.x.x..240
;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0;received=x.x.x..240
;rport=5060.
From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
To: <sip:200@x.x.x.56>;tag=as62b47138.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
CSeq: 10 REGISTER.
Server: FPBX-2.11.0(11.17.1).
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO,
PUBLISH, MESSAGE.
Supported: replaces, timer.
WWW-Authenticate: Digest algorithm=MD5, realm="asterisk",
nonce="59e39692".
Content-Length: 0.
.
But Kamailio is not sending authentication .
Any idea what could be wrong? Or any tip to do what i try.
The idea is that a sip endpoint register with authentication on kamailio
and it sends register with authentication to asterisk.
Thanks in advance
31 Mar
31 Mar
4:48 a.m.
Why not just relay the registration messages to Asterisk itself? What's the
use case?
Cheers
On Thu, Mar 31, 2016 at 9:34 AM, Alberto Sagredo <
alberto.sagredo(a)avanzada7.com> wrote:
Hi
Im trying to modify example for Asterisk/Kamailio integration that miconda
did, and trying to handle Forwarded register to Asterisk in an
authenticated way instead removing secret in asterisk.
I have made this changes
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $var(astip);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" + $var(astport);
$uac_req(furi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
$uac_req(turi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport) +
">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$hdr(Expires) + "\r\n";
xlog("Dentro de REGFWD");
t_on_failure("REG_AST");
uac_req_send();
}
failure_route[REG_AST] {
if (t_is_canceled()) {
exit;
}
xlog("Dentro de REG AST");
if(t_check_status("401|407")) {
xlog("Dentro de 401");
$avp(auser) = "test";
$avp(apass) = "test";
uac_auth();
t_relay();
exit;
}
}
What i see on traces:
U x.x.x..240:5060 -> x.x.x..56:5060
REGISTER sip:x.x.x.56:5060 SIP/2.0.
Via: SIP/2.0/UDP
x.x.x.240;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0.
To: <sip:200@x.x.x.56>.
From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
CSeq: 10 REGISTER.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
Max-Forwards: 70.
Content-Length: 0.
User-Agent: ANY.
Contact: <sip:emp_001_200@x.x.x.240:5060>.
Expires: 3600.
.
#
U x.x.x.56:5060 -> x.x.x..240:5060
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP x.x.x..240
;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0;received=x.x.x..240
;rport=5060.
From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
To: <sip:200@x.x.x.56>;tag=as62b47138.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
CSeq: 10 REGISTER.
Server: FPBX-2.11.0(11.17.1).
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO,
PUBLISH, MESSAGE.
Supported: replaces, timer.
WWW-Authenticate: Digest algorithm=MD5, realm="asterisk",
nonce="59e39692".
Content-Length: 0.
.
But Kamailio is not sending authentication .
Any idea what could be wrong? Or any tip to do what i try.
The idea is that a sip endpoint register with authentication on kamailio
and it sends register with authentication to asterisk.
Thanks in advance
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
4:49 a.m.
Hi Marrold. I want to authenticate user on Kamailio but want Asterisk to
see them registered with kamailio ip as contact.
I making also some manipulations in $fu as users are different
(emp_xxx_ext) in kamailio than in Asterisk xxx_ext
Thanks
2016-03-31 10:48 GMT+02:00 Marrold <kamailio(a)marrold.co.uk>uk>:
Why not just relay the registration messages to
Asterisk itself? What's
the use case?
Cheers
On Thu, Mar 31, 2016 at 9:34 AM, Alberto Sagredo <
alberto.sagredo(a)avanzada7.com> wrote:
Hi
Im trying to modify example for Asterisk/Kamailio integration that
miconda did, and trying to handle Forwarded register to Asterisk in an
authenticated way instead removing secret in asterisk.
I have made this changes
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $var(astip);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" + $var(astport);
$uac_req(furi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
$uac_req(turi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport) +
">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$hdr(Expires) + "\r\n";
xlog("Dentro de REGFWD");
t_on_failure("REG_AST");
uac_req_send();
}
failure_route[REG_AST] {
if (t_is_canceled()) {
exit;
}
xlog("Dentro de REG AST");
if(t_check_status("401|407")) {
xlog("Dentro de 401");
$avp(auser) = "test";
$avp(apass) = "test";
uac_auth();
t_relay();
exit;
}
}
What i see on traces:
U x.x.x..240:5060 -> x.x.x..56:5060
REGISTER sip:x.x.x.56:5060 SIP/2.0.
Via: SIP/2.0/UDP
x.x.x.240;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0.
To: <sip:200@x.x.x.56>.
From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
CSeq: 10 REGISTER.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
Max-Forwards: 70.
Content-Length: 0.
User-Agent: ANY.
Contact: <sip:emp_001_200@x.x.x.240:5060>.
Expires: 3600.
.
#
U x.x.x.56:5060 -> x.x.x..240:5060
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP x.x.x..240
;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0;received=
x.x.x..240;rport=5060.
From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
To: <sip:200@x.x.x.56>;tag=as62b47138.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
CSeq: 10 REGISTER.
Server: FPBX-2.11.0(11.17.1).
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO,
PUBLISH, MESSAGE.
Supported: replaces, timer.
WWW-Authenticate: Digest algorithm=MD5, realm="asterisk",
nonce="59e39692".
Content-Length: 0.
.
But Kamailio is not sending authentication .
Any idea what could be wrong? Or any tip to do what i try.
The idea is that a sip endpoint register with authentication on kamailio
and it sends register with authentication to asterisk.
Thanks in advance
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
4:55 a.m.
Why not just authenticate on Kamailio in that case?
Also, be aware that the Authorization Username ($au) is included in SIP
digest authentication. $au and $fu aren't necessarily the same, but on
most end points the default is to use the same value for both. If you
manipulate $fu or $au it may cause auth issues.
On Thu, Mar 31, 2016 at 9:49 AM, Alberto Sagredo <
alberto.sagredo(a)avanzada7.com> wrote:
Hi Marrold. I want to authenticate user on Kamailio
but want Asterisk to
see them registered with kamailio ip as contact.
I making also some manipulations in $fu as users are different
(emp_xxx_ext) in kamailio than in Asterisk xxx_ext
Thanks
2016-03-31 10:48 GMT+02:00 Marrold <kamailio(a)marrold.co.uk>uk>:
Why not just relay the registration messages to
Asterisk itself? What's
the use case?
Cheers
On Thu, Mar 31, 2016 at 9:34 AM, Alberto Sagredo <
alberto.sagredo(a)avanzada7.com> wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi
Im trying to modify example for Asterisk/Kamailio integration that
miconda did, and trying to handle Forwarded register to Asterisk in an
authenticated way instead removing secret in asterisk.
I have made this changes
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $var(astip);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" + $var(astport);
$uac_req(furi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
$uac_req(turi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport)
+ ">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$hdr(Expires) + "\r\n";
xlog("Dentro de REGFWD");
t_on_failure("REG_AST");
uac_req_send();
}
failure_route[REG_AST] {
if (t_is_canceled()) {
exit;
}
xlog("Dentro de REG AST");
if(t_check_status("401|407")) {
xlog("Dentro de 401");
$avp(auser) = "test";
$avp(apass) = "test";
uac_auth();
t_relay();
exit;
}
}
What i see on traces:
U x.x.x..240:5060 -> x.x.x..56:5060
REGISTER sip:x.x.x.56:5060 SIP/2.0.
Via: SIP/2.0/UDP
x.x.x.240;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0.
To: <sip:200@x.x.x.56>.
From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
CSeq: 10 REGISTER.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
Max-Forwards: 70.
Content-Length: 0.
User-Agent: ANY.
Contact: <sip:emp_001_200@x.x.x.240:5060>.
Expires: 3600.
.
#
U x.x.x.56:5060 -> x.x.x..240:5060
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP x.x.x..240
;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0;received=
x.x.x..240;rport=5060.
From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
To: <sip:200@x.x.x.56>;tag=as62b47138.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
CSeq: 10 REGISTER.
Server: FPBX-2.11.0(11.17.1).
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY,
INFO, PUBLISH, MESSAGE.
Supported: replaces, timer.
WWW-Authenticate: Digest algorithm=MD5, realm="asterisk",
nonce="59e39692".
Content-Length: 0.
.
But Kamailio is not sending authentication .
Any idea what could be wrong? Or any tip to do what i try.
The idea is that a sip endpoint register with authentication on kamailio
and it sends register with authentication to asterisk.
Thanks in advance
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
4:57 a.m.
I have it working, authenticating in Kamailio. And just works.
But there is a farm with lots of Asterisk and i was looking for an easy way
to do not modify secret= and permit= on every Asterisk Machine... Thats why
i was looking for that..
2016-03-31 10:55 GMT+02:00 Marrold <kamailio(a)marrold.co.uk>uk>:
Why not just authenticate on Kamailio in that case?
Also, be aware that the Authorization Username ($au) is included in SIP
digest authentication. $au and $fu aren't necessarily the same, but on
most end points the default is to use the same value for both. If you
manipulate $fu or $au it may cause auth issues.
On Thu, Mar 31, 2016 at 9:49 AM, Alberto Sagredo <
alberto.sagredo(a)avanzada7.com> wrote:
Hi Marrold. I want to authenticate user on
Kamailio but want Asterisk to
see them registered with kamailio ip as contact.
I making also some manipulations in $fu as users are different
(emp_xxx_ext) in kamailio than in Asterisk xxx_ext
Thanks
2016-03-31 10:48 GMT+02:00 Marrold <kamailio(a)marrold.co.uk>uk>:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Why not just relay the registration messages to
Asterisk itself? What's
the use case?
Cheers
On Thu, Mar 31, 2016 at 9:34 AM, Alberto Sagredo <
alberto.sagredo(a)avanzada7.com> wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi
Im trying to modify example for Asterisk/Kamailio integration that
miconda did, and trying to handle Forwarded register to Asterisk in an
authenticated way instead removing secret in asterisk.
I have made this changes
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $var(astip);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" + $var(astport);
$uac_req(furi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
$uac_req(turi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport)
+ ">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$hdr(Expires) + "\r\n";
xlog("Dentro de REGFWD");
t_on_failure("REG_AST");
uac_req_send();
}
failure_route[REG_AST] {
if (t_is_canceled()) {
exit;
}
xlog("Dentro de REG AST");
if(t_check_status("401|407")) {
xlog("Dentro de 401");
$avp(auser) = "test";
$avp(apass) = "test";
uac_auth();
t_relay();
exit;
}
}
What i see on traces:
U x.x.x..240:5060 -> x.x.x..56:5060
REGISTER sip:x.x.x.56:5060 SIP/2.0.
Via: SIP/2.0/UDP
x.x.x.240;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0.
To: <sip:200@x.x.x.56>.
From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
CSeq: 10 REGISTER.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
Max-Forwards: 70.
Content-Length: 0.
User-Agent: ANY.
Contact: <sip:emp_001_200@x.x.x.240:5060>.
Expires: 3600.
.
#
U x.x.x.56:5060 -> x.x.x..240:5060
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP x.x.x..240
;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0;received=
x.x.x..240;rport=5060.
From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
To: <sip:200@x.x.x.56>;tag=as62b47138.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
CSeq: 10 REGISTER.
Server: FPBX-2.11.0(11.17.1).
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY,
INFO, PUBLISH, MESSAGE.
Supported: replaces, timer.
WWW-Authenticate: Digest algorithm=MD5, realm="asterisk",
nonce="59e39692".
Content-Length: 0.
.
But Kamailio is not sending authentication .
Any idea what could be wrong? Or any tip to do what i try.
The idea is that a sip endpoint register with authentication on
kamailio and it sends register with authentication to asterisk.
Thanks in advance
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
5:06 a.m.
If Asterisk is still do it the authentication, then likely it is not
much gain on overall scalability. Maybe you can just use kamailio as an
edge proxy with Path enabled.
Otherwise, the requests generated with uac_req_send() don't get in
failure_route. You have to set the auth user/password in the
$uac_req(...) fields -- see the variables core cookbook for them. On the
other hand, this is not enough, you have to deal also with
authentication for other requests, such as INVITEs/SUBSCRIBEs/etc.
Cheers,
Daniel
On 31/03/16 10:57, Alberto Sagredo wrote:
I have it working, authenticating in Kamailio. And
just works.
But there is a farm with lots of Asterisk and i was looking for an
easy way to do not modify secret= and permit= on every Asterisk
Machine... Thats why i was looking for that..
2016-03-31 10:55 GMT+02:00 Marrold <kamailio(a)marrold.co.uk
<mailto:kamailio@marrold.co.uk>>:
Why not just authenticate on Kamailio in that case?
Also, be aware that the Authorization Username ($au) is included
in SIP digest authentication. $au and $fu aren't necessarily the
same, but on most end points the default is to use the same value
for both. If you manipulate $fu or $au it may cause auth issues.
On Thu, Mar 31, 2016 at 9:49 AM, Alberto Sagredo
<alberto.sagredo(a)avanzada7.com
<mailto:alberto.sagredo@avanzada7.com>> wrote:
Hi Marrold. I want to authenticate user on Kamailio but want
Asterisk to see them registered with kamailio ip as contact.
I making also some manipulations in $fu as users are different
(emp_xxx_ext) in kamailio than in Asterisk xxx_ext
Thanks
2016-03-31 10:48 GMT+02:00 Marrold <kamailio(a)marrold.co.uk
<mailto:kamailio@marrold.co.uk>>:
Why not just relay the registration messages to Asterisk
itself? What's the use case?
Cheers
On Thu, Mar 31, 2016 at 9:34 AM, Alberto Sagredo
<alberto.sagredo(a)avanzada7.com
<mailto:alberto.sagredo@avanzada7.com>> wrote:
Hi
Im trying to modify example for Asterisk/Kamailio
integration that miconda did, and trying to handle
Forwarded register to Asterisk in an authenticated way
instead removing secret in asterisk.
I have made this changes
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $var(astip);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" +
$var(astport);
$uac_req(furi)="sip:" + $(au{s.substr,8,0}) +
"@" + $var(rip);
$uac_req(turi)="sip:" + $(au{s.substr,8,0}) +
"@" + $var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au +
"@"
+
$sel(cfg_get.kamailio.bindip)
+ ":" +
$sel(cfg_get.kamailio.bindport) + ">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) +
"Expires: " + $sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) +
"Expires: " + $hdr(Expires) + "\r\n";
xlog("Dentro de REGFWD");
t_on_failure("REG_AST");
uac_req_send();
}
failure_route[REG_AST] {
if (t_is_canceled()) {
exit;
}
xlog("Dentro de REG AST");
if(t_check_status("401|407")) {
xlog("Dentro de 401");
$avp(auser) = "test";
$avp(apass) = "test";
uac_auth();
t_relay();
exit;
}
}
What i see on traces:
U x.x.x..240:5060 -> x.x.x..56:5060
REGISTER sip:x.x.x.56:5060 SIP/2.0.
Via: SIP/2.0/UDP
x.x.x.240;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0.
To: <sip:200@x.x.x.56>.
From:
<sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
CSeq: 10 REGISTER.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1
<mailto:09dc120d65932ed7-16044@127.0.0.1>.
Max-Forwards: 70.
Content-Length: 0.
User-Agent: ANY.
Contact: <sip:emp_001_200@x.x.x.240:5060>.
Expires: 3600.
.
#
U x.x.x.56:5060 -> x.x.x..240:5060
SIP/2.0 401 Unauthorized.
Via:
SIP/2.0/UDP
x.x.x..240;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0;received=x.x.x..240;rport=5060.
From:
<sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
To: <sip:200@x.x.x.56>;tag=as62b47138.
Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1
<mailto:09dc120d65932ed7-16044@127.0.0.1>.
CSeq: 10 REGISTER.
Server: FPBX-2.11.0(11.17.1).
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER,
SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE.
Supported: replaces, timer.
WWW-Authenticate: Digest algorithm=MD5,
realm="asterisk", nonce="59e39692".
Content-Length: 0.
.
But Kamailio is not sending authentication .
Any idea what could be wrong? Or any tip to do what i try.
The idea is that a sip endpoint register with
authentication on kamailio and it sends register with
authentication to asterisk.
Thanks in advance
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) -
sr-users mailing list
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
mailing list
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
mailing list
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio World Conference, Berlin, May 18-20, 2016 - http://www.kamailioworld.com
5:21 a.m.
Thanks Daniel.
Will take a look to that.
2016-03-31 11:06 GMT+02:00 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
If Asterisk is still do it the authentication, then
likely it is not much
gain on overall scalability. Maybe you can just use kamailio as an edge
proxy with Path enabled.
Otherwise, the requests generated with uac_req_send() don't get in
failure_route. You have to set the auth user/password in the $uac_req(...)
fields -- see the variables core cookbook for them. On the other hand, this
is not enough, you have to deal also with authentication for other
requests, such as INVITEs/SUBSCRIBEs/etc.
Cheers,
Daniel
On 31/03/16 10:57, Alberto Sagredo wrote:
I have it working, authenticating in Kamailio. And just works.
But there is a farm with lots of Asterisk and i was looking for an easy
way to do not modify secret= and permit= on every Asterisk Machine... Thats
why i was looking for that..
2016-03-31 10:55 GMT+02:00 Marrold <kamailio(a)marrold.co.uk>uk>:
Why not just authenticate on Kamailio in that
case?
Also, be aware that the Authorization Username ($au) is included in SIP
digest authentication. $au and $fu aren't necessarily the same, but on
most end points the default is to use the same value for both. If you
manipulate $fu or $au it may cause auth issues.
On Thu, Mar 31, 2016 at 9:49 AM, Alberto Sagredo <
<alberto.sagredo@avanzada7.com>alberto.sagredo@avanzada7.com> wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierlahttp://www.asipto.comhttp://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio World Conference, Berlin, May 18-20, 2016 - http://www.kamailioworld.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi Marrold. I want to authenticate user on
Kamailio but want Asterisk to
see them registered with kamailio ip as contact.
I making also some manipulations in $fu as users are different
(emp_xxx_ext) in kamailio than in Asterisk xxx_ext
Thanks
2016-03-31 10:48 GMT+02:00 Marrold < <kamailio(a)marrold.co.uk>
kamailio(a)marrold.co.uk>gt;:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Why not just relay the registration messages to
Asterisk itself? What's
the use case?
Cheers
On Thu, Mar 31, 2016 at 9:34 AM, Alberto Sagredo <
<alberto.sagredo@avanzada7.com>alberto.sagredo@avanzada7.com> wrote:
> Hi
>
> Im trying to modify example for Asterisk/Kamailio integration that
> miconda did, and trying to handle Forwarded register to Asterisk in an
> authenticated way instead removing secret in asterisk.
>
> I have made this changes
>
>
> route[REGFWD] {
>
> if(!is_method("REGISTER"))
>
> {
>
> return;
>
> }
>
>
>
> $var(rip) = $var(astip);
>
> $uac_req(method)="REGISTER";
>
> $uac_req(ruri)="sip:" + $var(rip) + ":" + $var(astport);
>
> $uac_req(furi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
>
> $uac_req(turi)="sip:" + $(au{s.substr,8,0}) + "@" +
$var(rip);
>
> $uac_req(hdrs)="Contact: <sip:" + $au + "@"
>
> + $sel(cfg_get.kamailio.bindip)
>
> + ":" +
> $sel(cfg_get.kamailio.bindport) + ">\r\n";
>
> if($sel(contact.expires) != $null)
>
> $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
> $sel(contact.expires) + "\r\n";
>
> else
>
> $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
> $hdr(Expires) + "\r\n";
>
>
> xlog("Dentro de REGFWD");
>
>
> t_on_failure("REG_AST");
>
>
> uac_req_send();
>
>
> }
>
>
>
>
> failure_route[REG_AST] {
>
>
> if (t_is_canceled()) {
>
> exit;
>
> }
>
>
> xlog("Dentro de REG AST");
>
>
> if(t_check_status("401|407")) {
>
> xlog("Dentro de 401");
>
> $avp(auser) = "test";
>
> $avp(apass) = "test";
>
> uac_auth();
>
> t_relay();
>
> exit;
>
> }
>
> }
>
>
> What i see on traces:
>
>
> U x.x.x..240:5060 -> x.x.x..56:5060
>
> REGISTER sip:x.x.x.56:5060 SIP/2.0.
>
> Via: SIP/2.0/UDP
> x.x.x.240;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0.
>
> To: <sip:200@x.x.x.56>.
>
> From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
>
> CSeq: 10 REGISTER.
>
> Call-ID: <09dc120d65932ed7-16044(a)127.0.0.1>
> 09dc120d65932ed7-16044(a)127.0.0.1.
>
> Max-Forwards: 70.
>
> Content-Length: 0.
>
> User-Agent: ANY.
>
> Contact: <sip:emp_001_200@x.x.x.240:5060>.
>
> Expires: 3600.
>
> .
>
>
> #
>
> U x.x.x.56:5060 -> x.x.x..240:5060
>
> SIP/2.0 401 Unauthorized.
>
> Via: SIP/2.0/UDP x.x.x..240
> ;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0;received=
> x.x.x..240;rport=5060.
>
> From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
>
> To: <sip:200@x.x.x.56>;tag=as62b47138.
>
> Call-ID: <09dc120d65932ed7-16044(a)127.0.0.1>
> 09dc120d65932ed7-16044(a)127.0.0.1.
>
> CSeq: 10 REGISTER.
>
> Server: FPBX-2.11.0(11.17.1).
>
> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY,
> INFO, PUBLISH, MESSAGE.
>
> Supported: replaces, timer.
>
> WWW-Authenticate: Digest algorithm=MD5, realm="asterisk",
> nonce="59e39692".
>
> Content-Length: 0.
>
> .
>
>
> But Kamailio is not sending authentication .
>
> Any idea what could be wrong? Or any tip to do what i try.
>
> The idea is that a sip endpoint register with authentication on
> kamailio and it sends register with authentication to asterisk.
>
> Thanks in advance
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
5:49 a.m.
If using asterisk realtime, create a view of the sip users table with password set to
null. This will scale if sharing databases which are replicated.
Then you can use Kamailio to authenticate and Asterisk to handle media.
On 31 Mar 2016, at 10:21, Alberto Sagredo
<alberto.sagredo(a)avanzada7.com> wrote:
Thanks Daniel.
Will take a look to that.
2016-03-31 11:06 GMT+02:00 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
If Asterisk is still do it the authentication,
then likely it is not much gain on overall scalability. Maybe you can just use kamailio as
an edge proxy with Path enabled.
Otherwise, the requests generated with uac_req_send() don't get in failure_route. You
have to set the auth user/password in the $uac_req(...) fields -- see the variables core
cookbook for them. On the other hand, this is not enough, you have to deal also with
authentication for other requests, such as INVITEs/SUBSCRIBEs/etc.
Cheers,
Daniel
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users On 31/03/16 10:57, Alberto Sagredo wrote:
I have it working, authenticating in Kamailio. And just works.
But there is a farm with lots of Asterisk and i was looking for an easy way to do not
modify secret= and permit= on every Asterisk Machine... Thats why i was looking for
that..
2016-03-31 10:55 GMT+02:00 Marrold <kamailio(a)marrold.co.uk>uk>:
--
Daniel-Constantin Mierla
http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio World Conference, Berlin, May 18-20, 2016 - http://www.kamailioworld.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users Why not just authenticate on Kamailio in that
case?
Also, be aware that the Authorization Username ($au) is included in SIP digest
authentication. $au and $fu aren't necessarily the same, but on most end points the
default is to use the same value for both. If you manipulate $fu or $au it
may cause auth issues.
> On Thu, Mar 31, 2016 at 9:49 AM, Alberto Sagredo
<alberto.sagredo(a)avanzada7.com> wrote:
> Hi Marrold. I want to authenticate user on Kamailio but want
Asterisk to see them registered with kamailio ip as contact.
>
> I making also some manipulations in $fu as users are different (emp_xxx_ext) in
kamailio than in Asterisk xxx_ext
>
> Thanks
>
> 2016-03-31 10:48 GMT+02:00 Marrold <kamailio(a)marrold.co.uk>uk>:
>> Why not just relay the registration messages to Asterisk itself? What's the
use case?
>>
>> Cheers
>>
>> On Thu, Mar 31, 2016 at 9:34 AM, Alberto Sagredo
<alberto.sagredo(a)avanzada7.com> wrote:
>>> Hi
>>>
>>> Im trying to modify example for Asterisk/Kamailio integration that miconda
did, and trying to handle Forwarded register to Asterisk in an authenticated way instead
removing secret in asterisk.
>>>
>>> I have made this changes
>>>
>>>
>>> route[REGFWD] {
>>> if(!is_method("REGISTER"))
>>> {
>>> return;
>>> }
>>>
>>> $var(rip) = $var(astip);
>>> $uac_req(method)="REGISTER";
>>> $uac_req(ruri)="sip:" + $var(rip) + ":" +
$var(astport);
>>> $uac_req(furi)="sip:" + $(au{s.substr,8,0}) + "@"
+ $var(rip);
>>> $uac_req(turi)="sip:" + $(au{s.substr,8,0}) + "@"
+ $var(rip);
>>> $uac_req(hdrs)="Contact: <sip:" + $au + "@"
>>> + $sel(cfg_get.kamailio.bindip)
>>> + ":" +
$sel(cfg_get.kamailio.bindport) + ">\r\n";
>>> if($sel(contact.expires) != $null)
>>> $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$sel(contact.expires) + "\r\n";
>>> else
>>> $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$hdr(Expires) + "\r\n";
>>>
>>> xlog("Dentro de REGFWD");
>>>
>>> t_on_failure("REG_AST");
>>>
>>> uac_req_send();
>>>
>>> }
>>>
>>>
>>>
>>>
>>> failure_route[REG_AST] {
>>>
>>> if (t_is_canceled()) {
>>> exit;
>>> }
>>>
>>> xlog("Dentro de REG AST");
>>>
>>> if(t_check_status("401|407")) {
>>> xlog("Dentro de 401");
>>> $avp(auser) = "test";
>>> $avp(apass) = "test";
>>> uac_auth();
>>> t_relay();
>>> exit;
>>> }
>>> }
>>>
>>> What i see on traces:
>>>
>>> U x.x.x..240:5060 -> x.x.x..56:5060
>>> REGISTER sip:x.x.x.56:5060 SIP/2.0.
>>> Via: SIP/2.0/UDP
x.x.x.240;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0.
>>> To: <sip:200@x.x.x.56>.
>>> From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
>>> CSeq: 10 REGISTER.
>>> Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
>>> Max-Forwards: 70.
>>> Content-Length: 0.
>>> User-Agent: ANY.
>>> Contact: <sip:emp_001_200@x.x.x.240:5060>.
>>> Expires: 3600.
>>> .
>>>
>>> #
>>> U x.x.x.56:5060 -> x.x.x..240:5060
>>> SIP/2.0 401 Unauthorized.
>>> Via: SIP/2.0/UDP
x.x.x..240;branch=z9hG4bKfb46.a47535d4000000000000000000000000.0;received=x.x.x..240;rport=5060.
>>> From: <sip:200@x.x.x.56>;tag=533cb9e91f4b999cf76861cbb9ed54ed-6a4f.
>>> To: <sip:200@x.x.x.56>;tag=as62b47138.
>>> Call-ID: 09dc120d65932ed7-16044(a)127.0.0.1.
>>> CSeq: 10 REGISTER.
>>> Server: FPBX-2.11.0(11.17.1).
>>> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO,
PUBLISH, MESSAGE.
>>> Supported: replaces, timer.
>>> WWW-Authenticate: Digest algorithm=MD5, realm="asterisk",
nonce="59e39692".
>>> Content-Length: 0.
>>> .
>>>
>>>
>>> But Kamailio is not sending authentication .
>>>
>>> Any idea what could be wrong? Or any tip to do what i try.
>>>
>>> The idea is that a sip endpoint register with authentication on kamailio and
it sends register with authentication to asterisk.
>>>
>>> Thanks in advance
>>>
>>>
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
3220
days inactive
3220
days old
7 comments
4 participants
participants (4)
-
Alberto Sagredo -
Daniel-Constantin Mierla -
Eric Koome -
Marrold