16 Oct
2008
16 Oct
'08
7:58 a.m.
I also have another interesting problem with the aforementioned
configuration (http://pastebin.com/f28051a5).
When I write the dialog profile size into an AVP, it works fine.
When I write it into a script var, i.e. replace $avp(S:dlg_sz) with
$var(dlg_sz), it crashes:
Relaying INVITE from 210.23.22.23 to sip:2122222322@210.23.22.23:5060
[D] Added new dialog for 7709600101
[ONREPLY-ROUTE 1] Provisional reply 100 received.
[ONREPLY-ROUTE 1] 200 OK received for 7709600101
[ONREPLY-ROUTE 1] INVITE/200 is part of dialog for 7709600101
Segmentation fault (core dumped)
GDB reveals:
Program received signal SIGSEGV, Segmentation fault.
0xb7e7f2f8 in strncpy () from /lib/i686/nosegneg/libc.so.6
(gdb) where
#0 0xb7e7f2f8 in strncpy () from /lib/i686/nosegneg/libc.so.6
#1 0x080a4a07 in set_var_value (var=0x8188d98, value=0xbfae5f28,
flags=<value o
at script_var.c:122
#2 0xb7d6c4fe in w_get_profile_size (msg=0x81902b8, profile=0xb5ede180
"\034??\
value=0x818b6b8 "@?\030\b", result=0x818b6f8 "N") at
dialog.c:668
#3 0x08054f15 in do_action (a=0x818b850, msg=0x81902b8) at action.c:850
#4 0x08053ed2 in run_action_list (a=0x818b5c8, msg=0x81902b8) at
action.c:138
#5 0x08056365 in do_action (a=0x818bab8, msg=0x81902b8) at action.c:722
#6 0x08053ed2 in run_action_list (a=0x818b178, msg=0x81902b8) at
action.c:138
#7 0x080572c2 in run_top_route (a=0x818b178, msg=0x81902b8) at action.c:118
#8 0xb7de3a64 in reply_received (p_msg=0x81902b8) at t_reply.c:1361
#9 0x08064793 in forward_reply (msg=0x81902b8) at forward.c:507
#10 0x08090d5b in receive_msg (
buf=0x81600e0 "SIP/2.0 200 OK\r\nVia: SIP/2.0/UDP
215.22.22.22;branch=z9hG4
08.52.173.18\r\nVia: SIP/2.0/UDP
198.225.86.10:5060;branch=z9hG4bKragjo0207gm0dc
p:208.52."..., len=814, rcv_info=0xbfae65d4) at receive.c:203
#11 0x080cccfb in udp_rcv_loop () at udp_server.c:449
#12 0x0806b78d in main (argc=1, argv=0xbfae6764) at main.c:693
It would seem to me that there is some sort of buffer overflow issue
that results in the garbage seen above.
Not sure that it makes a difference, but the glibc being linked against
is a Xen-safe one that disables TLS functionality. This is all running
inside a Xen DomU.
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599
16 Oct
16 Oct
8:04 a.m.
New subject: [Kamailio-Users] Core dump on writing dialog profile size into script var.
It would seem that the malloc for the script var occasionally fails,
which may or may not be central to the issue:
[SWITCH] Relaying BYE from 210.23.22.23 to sip:2122222322@210.23.22.23
(DTAG=706
[SWITCH] [D] No dialog affinity for this BYE
Oct 16 05:03:32 [8710] ERROR:core:set_var_value: out of pkg mem!
Oct 16 05:03:32 [8710] ERROR:dialog:w_get_profile_size: cannot set svar
[SWITCH] [D] Profile size for 7709600101 now: 0
[ONREPLY-ROUTE 2] Received 200 for BYE
Relaying INVITE from 210.23.22.23 to sip:2122222322@210.23.22.23:5060
[D] Added new dialog for 7709600101
[ONREPLY-ROUTE 1] Provisional reply 100 received.
[ONREPLY-ROUTE 1] 200 OK received for 7709600101
[ONREPLY-ROUTE 1] INVITE/200 is part of dialog for 7709600101
[ONREPLY-ROUTE 1] Dialog profile size is: >
[SWITCH] Relaying ACK from 210.23.22.23 to sip:2122222322@210.23.22.23
(DTAG=706
[SWITCH] [D] No dialog affinity for this ACK
Segmentation fault (core dumped)
Alex Balashov wrote:
I also have another interesting problem with the
aforementioned
configuration (http://pastebin.com/f28051a5).
When I write the dialog profile size into an AVP, it works fine.
When I write it into a script var, i.e. replace $avp(S:dlg_sz) with
$var(dlg_sz), it crashes:
Relaying INVITE from 210.23.22.23 to sip:2122222322@210.23.22.23:5060
[D] Added new dialog for 7709600101
[ONREPLY-ROUTE 1] Provisional reply 100 received.
[ONREPLY-ROUTE 1] 200 OK received for 7709600101
[ONREPLY-ROUTE 1] INVITE/200 is part of dialog for 7709600101
Segmentation fault (core dumped)
GDB reveals:
Program received signal SIGSEGV, Segmentation fault.
0xb7e7f2f8 in strncpy () from /lib/i686/nosegneg/libc.so.6
(gdb) where
#0 0xb7e7f2f8 in strncpy () from /lib/i686/nosegneg/libc.so.6
#1 0x080a4a07 in set_var_value (var=0x8188d98, value=0xbfae5f28,
flags=<value o
at script_var.c:122
#2 0xb7d6c4fe in w_get_profile_size (msg=0x81902b8, profile=0xb5ede180
"\034??\
value=0x818b6b8 "@?\030\b", result=0x818b6f8 "N") at
dialog.c:668
#3 0x08054f15 in do_action (a=0x818b850, msg=0x81902b8) at action.c:850
#4 0x08053ed2 in run_action_list (a=0x818b5c8, msg=0x81902b8) at
action.c:138
#5 0x08056365 in do_action (a=0x818bab8, msg=0x81902b8) at action.c:722
#6 0x08053ed2 in run_action_list (a=0x818b178, msg=0x81902b8) at
action.c:138
#7 0x080572c2 in run_top_route (a=0x818b178, msg=0x81902b8) at action.c:118
#8 0xb7de3a64 in reply_received (p_msg=0x81902b8) at t_reply.c:1361
#9 0x08064793 in forward_reply (msg=0x81902b8) at forward.c:507
#10 0x08090d5b in receive_msg (
buf=0x81600e0 "SIP/2.0 200 OK\r\nVia: SIP/2.0/UDP
215.22.22.22;branch=z9hG4
08.52.173.18\r\nVia: SIP/2.0/UDP
198.225.86.10:5060;branch=z9hG4bKragjo0207gm0dc
p:208.52."..., len=814, rcv_info=0xbfae65d4) at receive.c:203
#11 0x080cccfb in udp_rcv_loop () at udp_server.c:449
#12 0x0806b78d in main (argc=1, argv=0xbfae6764) at main.c:693
It would seem to me that there is some sort of buffer overflow issue
that results in the garbage seen above.
Not sure that it makes a difference, but the glibc being linked against
is a Xen-safe one that disables TLS functionality. This is all running
inside a Xen DomU.
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599
12:41 p.m.
New subject: [Kamailio-Users] Core dump on writing dialog profile size into script var.
Hello Alex,
I found a bug in the dialog module, the profile size is integer and the
variable was set as string value. Can you get the trunk and test? I will
backport afterwards, thanks,
Daniel
On 10/16/08 08:04, Alex Balashov wrote:
It would seem that the malloc for the script var
occasionally fails,
which may or may not be central to the issue:
[SWITCH] Relaying BYE from 210.23.22.23 to sip:2122222322@210.23.22.23
(DTAG=706
[SWITCH] [D] No dialog affinity for this BYE
Oct 16 05:03:32 [8710] ERROR:core:set_var_value: out of pkg mem!
Oct 16 05:03:32 [8710] ERROR:dialog:w_get_profile_size: cannot set svar
[SWITCH] [D] Profile size for 7709600101 now: 0
[ONREPLY-ROUTE 2] Received 200 for BYE
Relaying INVITE from 210.23.22.23 to sip:2122222322@210.23.22.23:5060
[D] Added new dialog for 7709600101
[ONREPLY-ROUTE 1] Provisional reply 100 received.
[ONREPLY-ROUTE 1] 200 OK received for 7709600101
[ONREPLY-ROUTE 1] INVITE/200 is part of dialog for 7709600101
[ONREPLY-ROUTE 1] Dialog profile size is: >
[SWITCH] Relaying ACK from 210.23.22.23 to sip:2122222322@210.23.22.23
(DTAG=706
[SWITCH] [D] No dialog affinity for this ACK
Segmentation fault (core dumped)
Alex Balashov wrote:
--
Daniel-Constantin Mierla
http://www.asipto.com
I also have another interesting problem with the
aforementioned
configuration (http://pastebin.com/f28051a5).
When I write the dialog profile size into an AVP, it works fine.
When I write it into a script var, i.e. replace $avp(S:dlg_sz) with
$var(dlg_sz), it crashes:
Relaying INVITE from 210.23.22.23 to sip:2122222322@210.23.22.23:5060
[D] Added new dialog for 7709600101
[ONREPLY-ROUTE 1] Provisional reply 100 received.
[ONREPLY-ROUTE 1] 200 OK received for 7709600101
[ONREPLY-ROUTE 1] INVITE/200 is part of dialog for 7709600101
Segmentation fault (core dumped)
GDB reveals:
Program received signal SIGSEGV, Segmentation fault.
0xb7e7f2f8 in strncpy () from /lib/i686/nosegneg/libc.so.6
(gdb) where
#0 0xb7e7f2f8 in strncpy () from /lib/i686/nosegneg/libc.so.6
#1 0x080a4a07 in set_var_value (var=0x8188d98, value=0xbfae5f28,
flags=<value o
at script_var.c:122
#2 0xb7d6c4fe in w_get_profile_size (msg=0x81902b8, profile=0xb5ede180
"\034??\
value=0x818b6b8 "@?\030\b", result=0x818b6f8 "N") at
dialog.c:668
#3 0x08054f15 in do_action (a=0x818b850, msg=0x81902b8) at action.c:850
#4 0x08053ed2 in run_action_list (a=0x818b5c8, msg=0x81902b8) at
action.c:138
#5 0x08056365 in do_action (a=0x818bab8, msg=0x81902b8) at action.c:722
#6 0x08053ed2 in run_action_list (a=0x818b178, msg=0x81902b8) at
action.c:138
#7 0x080572c2 in run_top_route (a=0x818b178, msg=0x81902b8) at action.c:118
#8 0xb7de3a64 in reply_received (p_msg=0x81902b8) at t_reply.c:1361
#9 0x08064793 in forward_reply (msg=0x81902b8) at forward.c:507
#10 0x08090d5b in receive_msg (
buf=0x81600e0 "SIP/2.0 200 OK\r\nVia: SIP/2.0/UDP
215.22.22.22;branch=z9hG4
08.52.173.18\r\nVia: SIP/2.0/UDP
198.225.86.10:5060;branch=z9hG4bKragjo0207gm0dc
p:208.52."..., len=814, rcv_info=0xbfae65d4) at receive.c:203
#11 0x080cccfb in udp_rcv_loop () at udp_server.c:449
#12 0x0806b78d in main (argc=1, argv=0xbfae6764) at main.c:693
It would seem to me that there is some sort of buffer overflow issue
that results in the garbage seen above.
Not sure that it makes a difference, but the glibc being linked against
is a Xen-safe one that disables TLS functionality. This is all running
inside a Xen DomU.
8:29 p.m.
New subject: [Kamailio-Users] Core dump on writing dialog profile size into script var.
I feel retarded asking this as I'm sure it's abundantly made clear on
the web site / dokuwiki, but what's the SVN URI to check out trunk?
Daniel-Constantin Mierla wrote:
Hello Alex,
I found a bug in the dialog module, the profile size is integer and the
variable was set as string value. Can you get the trunk and test? I will
backport afterwards, thanks,
Daniel
On 10/16/08 08:04, Alex Balashov wrote:
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599
It would seem that the malloc for the script var
occasionally fails,
which may or may not be central to the issue:
[SWITCH] Relaying BYE from 210.23.22.23 to sip:2122222322@210.23.22.23
(DTAG=706
[SWITCH] [D] No dialog affinity for this BYE
Oct 16 05:03:32 [8710] ERROR:core:set_var_value: out of pkg mem!
Oct 16 05:03:32 [8710] ERROR:dialog:w_get_profile_size: cannot set svar
[SWITCH] [D] Profile size for 7709600101 now: 0
[ONREPLY-ROUTE 2] Received 200 for BYE
Relaying INVITE from 210.23.22.23 to sip:2122222322@210.23.22.23:5060
[D] Added new dialog for 7709600101
[ONREPLY-ROUTE 1] Provisional reply 100 received.
[ONREPLY-ROUTE 1] 200 OK received for 7709600101
[ONREPLY-ROUTE 1] INVITE/200 is part of dialog for 7709600101
[ONREPLY-ROUTE 1] Dialog profile size is: >
[SWITCH] Relaying ACK from 210.23.22.23 to sip:2122222322@210.23.22.23
(DTAG=706
[SWITCH] [D] No dialog affinity for this ACK
Segmentation fault (core dumped)
Alex Balashov wrote:
I also have another interesting problem with the
aforementioned
configuration (http://pastebin.com/f28051a5).
When I write the dialog profile size into an AVP, it works fine.
When I write it into a script var, i.e. replace $avp(S:dlg_sz) with
$var(dlg_sz), it crashes:
Relaying INVITE from 210.23.22.23 to sip:2122222322@210.23.22.23:5060
[D] Added new dialog for 7709600101
[ONREPLY-ROUTE 1] Provisional reply 100 received.
[ONREPLY-ROUTE 1] 200 OK received for 7709600101
[ONREPLY-ROUTE 1] INVITE/200 is part of dialog for 7709600101
Segmentation fault (core dumped)
GDB reveals:
Program received signal SIGSEGV, Segmentation fault.
0xb7e7f2f8 in strncpy () from /lib/i686/nosegneg/libc.so.6
(gdb) where
#0 0xb7e7f2f8 in strncpy () from /lib/i686/nosegneg/libc.so.6
#1 0x080a4a07 in set_var_value (var=0x8188d98, value=0xbfae5f28,
flags=<value o
at script_var.c:122
#2 0xb7d6c4fe in w_get_profile_size (msg=0x81902b8,
profile=0xb5ede180 "\034??\
value=0x818b6b8 "@?\030\b", result=0x818b6f8 "N") at
dialog.c:668
#3 0x08054f15 in do_action (a=0x818b850, msg=0x81902b8) at action.c:850
#4 0x08053ed2 in run_action_list (a=0x818b5c8, msg=0x81902b8) at
action.c:138
#5 0x08056365 in do_action (a=0x818bab8, msg=0x81902b8) at action.c:722
#6 0x08053ed2 in run_action_list (a=0x818b178, msg=0x81902b8) at
action.c:138
#7 0x080572c2 in run_top_route (a=0x818b178, msg=0x81902b8) at
action.c:118
#8 0xb7de3a64 in reply_received (p_msg=0x81902b8) at t_reply.c:1361
#9 0x08064793 in forward_reply (msg=0x81902b8) at forward.c:507
#10 0x08090d5b in receive_msg (
buf=0x81600e0 "SIP/2.0 200 OK\r\nVia: SIP/2.0/UDP
215.22.22.22;branch=z9hG4
08.52.173.18\r\nVia: SIP/2.0/UDP
198.225.86.10:5060;branch=z9hG4bKragjo0207gm0dc
p:208.52."..., len=814, rcv_info=0xbfae65d4) at receive.c:203
#11 0x080cccfb in udp_rcv_loop () at udp_server.c:449
#12 0x0806b78d in main (argc=1, argv=0xbfae6764) at main.c:693
It would seem to me that there is some sort of buffer overflow issue
that results in the garbage seen above.
Not sure that it makes a difference, but the glibc being linked
against is a Xen-safe one that disables TLS functionality. This is
all running inside a Xen DomU.
8:32 p.m.
Hi Alex,
I feel retarded asking this as I'm sure it's
abundantly made clear on
the web site / dokuwiki, but what's the SVN URI to check out trunk?
Go to this address (http://www.kamailio.org/mos/view/Download/) and
search for: "SVN Download"
Saludos
JesusR.
Daniel-Constantin Mierla wrote:
Saludos
JesusR.
------------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------------
Hello Alex,
I found a bug in the dialog module, the profile size is integer and
the
variable was set as string value. Can you get the trunk and test? I
will
backport afterwards, thanks,
Daniel
On 10/16/08 08:04, Alex Balashov wrote:
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
It would seem that the malloc for the script var
occasionally fails,
which may or may not be central to the issue:
[SWITCH] Relaying BYE from 210.23.22.23 to sip:2122222322@210.23.22.23
(DTAG=706
[SWITCH] [D] No dialog affinity for this BYE
Oct 16 05:03:32 [8710] ERROR:core:set_var_value: out of pkg mem!
Oct 16 05:03:32 [8710] ERROR:dialog:w_get_profile_size: cannot set
svar
[SWITCH] [D] Profile size for 7709600101 now: 0
[ONREPLY-ROUTE 2] Received 200 for BYE
Relaying INVITE from 210.23.22.23 to sip:
2122222322@210.23.22.23:5060
[D] Added new dialog for 7709600101
[ONREPLY-ROUTE 1] Provisional reply 100 received.
[ONREPLY-ROUTE 1] 200 OK received for 7709600101
[ONREPLY-ROUTE 1] INVITE/200 is part of dialog for 7709600101
[ONREPLY-ROUTE 1] Dialog profile size is: >
[SWITCH] Relaying ACK from 210.23.22.23 to sip:2122222322@210.23.22.23
(DTAG=706
[SWITCH] [D] No dialog affinity for this ACK
Segmentation fault (core dumped)
Alex Balashov wrote:
I also have another interesting problem with the
aforementioned
configuration (http://pastebin.com/f28051a5).
When I write the dialog profile size into an AVP, it works fine.
When I write it into a script var, i.e. replace $avp(S:dlg_sz) with
$var(dlg_sz), it crashes:
Relaying INVITE from 210.23.22.23 to sip:2122222322@210.23.22.23:5060
[D] Added new dialog for 7709600101
[ONREPLY-ROUTE 1] Provisional reply 100 received.
[ONREPLY-ROUTE 1] 200 OK received for 7709600101
[ONREPLY-ROUTE 1] INVITE/200 is part of dialog for 7709600101
Segmentation fault (core dumped)
GDB reveals:
Program received signal SIGSEGV, Segmentation fault.
0xb7e7f2f8 in strncpy () from /lib/i686/nosegneg/libc.so.6
(gdb) where
#0 0xb7e7f2f8 in strncpy () from /lib/i686/nosegneg/libc.so.6
#1 0x080a4a07 in set_var_value (var=0x8188d98, value=0xbfae5f28,
flags=<value o
at script_var.c:122
#2 0xb7d6c4fe in w_get_profile_size (msg=0x81902b8,
profile=0xb5ede180 "\034??\
value=0x818b6b8 "@?\030\b", result=0x818b6f8 "N") at dialog.c:
668
#3 0x08054f15 in do_action (a=0x818b850, msg=0x81902b8) at
action.c:850
#4 0x08053ed2 in run_action_list (a=0x818b5c8, msg=0x81902b8) at
action.c:138
#5 0x08056365 in do_action (a=0x818bab8, msg=0x81902b8) at
action.c:722
#6 0x08053ed2 in run_action_list (a=0x818b178, msg=0x81902b8) at
action.c:138
#7 0x080572c2 in run_top_route (a=0x818b178, msg=0x81902b8) at
action.c:118
#8 0xb7de3a64 in reply_received (p_msg=0x81902b8) at t_reply.c:
1361
#9 0x08064793 in forward_reply (msg=0x81902b8) at forward.c:507
#10 0x08090d5b in receive_msg (
buf=0x81600e0 "SIP/2.0 200 OK\r\nVia: SIP/2.0/UDP
215.22.22.22;branch=z9hG4
08.52.173.18\r\nVia: SIP/2.0/UDP
198.225.86.10:5060;branch=z9hG4bKragjo0207gm0dc
p:208.52."..., len=814, rcv_info=0xbfae65d4) at receive.c:203
#11 0x080cccfb in udp_rcv_loop () at udp_server.c:449
#12 0x0806b78d in main (argc=1, argv=0xbfae6764) at main.c:693
It would seem to me that there is some sort of buffer overflow
issue
that results in the garbage seen above.
Not sure that it makes a difference, but the glibc being linked
against is a Xen-safe one that disables TLS functionality. This is
all running inside a Xen DomU.
8:33 p.m.
On Thursday 16 October 2008, Alex Balashov wrote:
I feel retarded asking this as I'm sure it's
abundantly made clear on
the web site / dokuwiki, but what's the SVN URI to check out trunk?
Hi Alex,
you can checkout from sf.org (can be slow sometimes):
https://openser.svn.sourceforge.net/svnroot/openser/trunk
or the read/only mirror, which is fast:
http://devel.kamailio.org/svn/trunk
Cheers,
Henning
8:59 p.m.
New subject: [Kamailio-Users] Core dump on writing dialog profile size into script var.
Hello Alex,
and, if everyone tried to give hints, the command is:
# svn co https://openser.svn.sourceforge.net/svnroot/openser/trunk kamailio
However, what I actually want to say is that the patch is very minimal,
see it here:
http://openser.svn.sourceforge.net/viewvc/openser/trunk/modules/dialog/dial…
You probably can fix it in 1.4 very easy and test it there.
Cheers,
Daniel
On 10/16/08 20:33, Henning Westerholt wrote:
On Thursday 16 October 2008, Alex Balashov wrote:
--
Daniel-Constantin Mierla
http://www.asipto.com
I feel retarded asking this as I'm sure
it's abundantly made clear on
the web site / dokuwiki, but what's the SVN URI to check out trunk?
Hi Alex,
you can checkout from sf.org (can be slow sometimes):
https://openser.svn.sourceforge.net/svnroot/openser/trunk
or the read/only mirror, which is fast:
http://devel.kamailio.org/svn/trunk
Cheers,
Henning
10:03 p.m.
New subject: [Kamailio-Users] Core dump on writing dialog profile size into script var.
Daniel,
This has, indeed, appeared to have fixed the issue. Thanks!
-- Alex
Daniel-Constantin Mierla wrote:
Hello Alex,
and, if everyone tried to give hints, the command is:
# svn co https://openser.svn.sourceforge.net/svnroot/openser/trunk kamailio
However, what I actually want to say is that the patch is very minimal,
see it here:
http://openser.svn.sourceforge.net/viewvc/openser/trunk/modules/dialog/dial…
You probably can fix it in 1.4 very easy and test it there.
Cheers,
Daniel
On 10/16/08 20:33, Henning Westerholt wrote:
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599
On Thursday 16 October 2008, Alex Balashov
wrote:
I feel retarded asking this as I'm sure
it's abundantly made clear on
the web site / dokuwiki, but what's the SVN URI to check out trunk?
Hi Alex,
you can checkout from sf.org (can be slow sometimes):
https://openser.svn.sourceforge.net/svnroot/openser/trunk
or the read/only mirror, which is fast:
http://devel.kamailio.org/svn/trunk
Cheers,
Henning
10:19 p.m.
New subject: [Kamailio-Users] Core dump on writing dialog profile size into script var.
On 10/16/08 22:03, Alex Balashov wrote:
Daniel,
This has, indeed, appeared to have fixed the issue. Thanks!
ok, I backported to
1.4
Cheers,
Daniel
-- Alex
Daniel-Constantin Mierla wrote:
--
Daniel-Constantin Mierla
http://www.asipto.com
Hello Alex,
and, if everyone tried to give hints, the command is:
# svn co https://openser.svn.sourceforge.net/svnroot/openser/trunk
kamailio
However, what I actually want to say is that the patch is very
minimal, see it here:
http://openser.svn.sourceforge.net/viewvc/openser/trunk/modules/dialog/dial…
You probably can fix it in 1.4 very easy and test it there.
Cheers,
Daniel
On 10/16/08 20:33, Henning Westerholt wrote:
On Thursday 16 October 2008, Alex Balashov
wrote:
I feel retarded asking this as I'm sure
it's abundantly made clear on
the web site / dokuwiki, but what's the SVN URI to check out trunk?
Hi Alex,
you can checkout from sf.org (can be slow sometimes):
https://openser.svn.sourceforge.net/svnroot/openser/trunk
or the read/only mirror, which is fast:
http://devel.kamailio.org/svn/trunk
Cheers,
Henning
10 Nov
10 Nov
12:21 a.m.
New subject: [Kamailio-Users] Core dump on writing dialog profile size into script var.
Has this not been backported into the 1.4.1 tarball available in /pub?
I just downloaded an installation and found the bug was still happening.
(Problem was reported when 1.4.0 was current.)
Alex Balashov wrote:
Daniel,
This has, indeed, appeared to have fixed the issue. Thanks!
-- Alex
Daniel-Constantin Mierla wrote:
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599
Hello Alex,
and, if everyone tried to give hints, the command is:
# svn co https://openser.svn.sourceforge.net/svnroot/openser/trunk kamailio
However, what I actually want to say is that the patch is very minimal,
see it here:
http://openser.svn.sourceforge.net/viewvc/openser/trunk/modules/dialog/dial…
You probably can fix it in 1.4 very easy and test it there.
Cheers,
Daniel
On 10/16/08 20:33, Henning Westerholt wrote:
> On Thursday 16 October 2008, Alex Balashov wrote:
>
>> I feel retarded asking this as I'm sure it's abundantly made clear on
>> the web site / dokuwiki, but what's the SVN URI to check out trunk?
>>
> Hi Alex,
>
> you can checkout from sf.org (can be slow sometimes):
> https://openser.svn.sourceforge.net/svnroot/openser/trunk
>
> or the read/only mirror, which is fast:
> http://devel.kamailio.org/svn/trunk
>
> Cheers,
>
> Henning
>
5857
days inactive
5881
days old
9 comments
4 participants
participants (4)
-
Alex Balashov -
Daniel-Constantin Mierla -
Henning Westerholt -
Jesus Rodriguez