Hi Carlos, the radius server is setup on port 1812 but still it doesn't work. However there's another solution.

The solution is to install a bare bones freeradius on SER and have it proxy the request to the external radius server instead. Others from this list have been using this solution also.

Thanks

Johnny

----- Original Message ----- From: Carlos Maynard To: Johnny Lum Cc: serusers@lists.iptel.org Sent: Friday, October 15, 2004 7:41 AM Subject: Re: [Serusers] Can't Get Radius Working in SER

Hi Johnny,

Verify that your radius server is listening on port 1812.

Carlos.

Johnny Lum wrote: Hi, I'm currently running SER 0.8.14, radiusclient 0.4.4, and freeradius 1.0.1 on slackware 10.0.

With the current setup, it works fine if freeradius is on the same machine as SER. However if I install freeradius on a separate machine, it doesn't work.

When I view the syslogs of the machine where SER + radiusclient is installed it shows: rc_send_server: no reply from RADIUS server radiusserver.aebc.com:1812

In the setup of /usr/local/etc/radiusclient/servers, I have an entry of the radius server: 209.53.197.101 mysecret

I also have the same in /usr/local/etc/radiusclient/radiusclient.conf authserver 209.53.197.101 acctserver 209.53.197.101

Thanks

Johnny Lum, Programmer VoIP, ADSL, Wireless Hot Spots, 56K Roaming, Call Center, Server Hosting www.aebc.com Sales: 604.288.1088 Support: 604.279.9078 Fax: 604.207.0155 ---------------------------------------------------------------------------- _______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers