13 Jun
2011
13 Jun
'11
8:05 a.m.
In Kamailio 1.4.3
I have the following scenario:
$var(a) = 0
$var(b) = 0
$var(a) = $(tU{s.len});
$var(b) = $var(a) - 5;
xlog(" $var(b)");
the result $var(b) is always the same as $var(a)
should i check if some specific module is loaded?
the debugs does not show any error, and $var(a) and $var(b) are unique.
Variables are working, but not the operations with the variables.
regards
O
15 Jun
15 Jun
3:24 p.m.
New subject: Operations With Variables $var- does it need to load a module
Hello,
On 6/13/11 7:05 AM, Omar wrote:
In Kamailio 1.4.3
I have the following scenario:
$var(a) = 0
$var(b) = 0
$var(a) = $(tU{s.len});
$var(b) = $var(a) - 5;
xlog(" $var(b)");
the result $var(b) is always the same as $var(a)
should i check if some specific module is loaded?
the debugs does not show any error, and $var(a) and $var(b) are unique.
Variables are working, but not the operations with the variables.
there is no
module needed to be loaded for that version.
Can you add xlog() lines to print the values of variables for each step,
including the $tU s.len transformation.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
4:14 p.m.
New subject: Operations With Variables $var- does it need to load a module
BEFORE VAR A#################################################################===__IN
FAILURE_ROUTE :::======> RURI=+1404345
VAR A
#################################################################===__IN FAILURE_ROUTE
:::======> rU = +1404345 VAR A = 8 VAR B = 0
AFTER VAR B #################################################################===__IN
FAILURE_ROUTE :::======> rU = +1404345 VAR A = 8 VAR B = 8 :: ::
i changed the tU to rU, i have the same result, just to make a test.
is really interesting.
O
On Jun 15, 2011, at 8:24 AM, Daniel-Constantin Mierla wrote:
Hello,
On 6/13/11 7:05 AM, Omar wrote:
In Kamailio 1.4.3
I have the following scenario:
$var(a) = 0
$var(b) = 0
$var(a) = $(tU{s.len});
$var(b) = $var(a) - 5;
xlog(" $var(b)");
the result $var(b) is always the same as $var(a)
should i check if some specific module is loaded?
the debugs does not show any error, and $var(a) and $var(b) are unique.
Variables are working, but not the operations with the variables.
there is no
module needed to be loaded for that version.
Can you add xlog() lines to print the values of variables for each step, including the
$tU s.len transformation.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
7:19 p.m.
New subject: Operations With Variables $var- does it need to load a module
I tried it in normale route and failure route, it works (at least in
Kamailio 3.1)
regards
klaus
On 15.06.2011 15:14, Omar wrote:
BEFORE VAR A#################################################################===__IN
FAILURE_ROUTE :::======> RURI=+1404345
VAR A
#################################################################===__IN FAILURE_ROUTE
:::======> rU = +1404345 VAR A = 8 VAR B = 0
AFTER VAR B #################################################################===__IN
FAILURE_ROUTE :::======> rU = +1404345 VAR A = 8 VAR B = 8 :: ::
i changed the tU to rU, i have the same result, just to make a test.
is really interesting.
O
On Jun 15, 2011, at 8:24 AM, Daniel-Constantin Mierla wrote:
Hello,
On 6/13/11 7:05 AM, Omar wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users In Kamailio 1.4.3
I have the following scenario:
$var(a) = 0
$var(b) = 0
$var(a) = $(tU{s.len});
$var(b) = $var(a) - 5;
xlog(" $var(b)");
the result $var(b) is always the same as $var(a)
should i check if some specific module is loaded?
the debugs does not show any error, and $var(a) and $var(b) are unique.
Variables are working, but not the operations with the variables.
there is no
module needed to be loaded for that version.
Can you add xlog() lines to print the values of variables for each step, including the
$tU s.len transformation.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
8:06 p.m.
New subject: Operations With Variables $var- does it need to load a module
sight ! :-(
thank you Klaus, We just start testing the 3.1.4 but until the Labs releases will take
some time
O
On Jun 15, 2011, at 12:19 PM, Klaus Darilion wrote:
I tried it in normale route and failure route, it
works (at least in Kamailio 3.1)
regards
klaus
On 15.06.2011 15:14, Omar wrote:
BEFORE VAR A#################################################################===__IN
FAILURE_ROUTE :::======> RURI=+1404345
VAR A
#################################################################===__IN FAILURE_ROUTE
:::======> rU = +1404345 VAR A = 8 VAR B = 0
AFTER VAR B #################################################################===__IN
FAILURE_ROUTE :::======> rU = +1404345 VAR A = 8 VAR B = 8 :: ::
i changed the tU to rU, i have the same result, just to make a test.
is really interesting.
O
On Jun 15, 2011, at 8:24 AM, Daniel-Constantin Mierla wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
On 6/13/11 7:05 AM, Omar wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users In Kamailio 1.4.3
I have the following scenario:
$var(a) = 0
$var(b) = 0
$var(a) = $(tU{s.len});
$var(b) = $var(a) - 5;
xlog(" $var(b)");
the result $var(b) is always the same as $var(a)
should i check if some specific module is loaded?
the debugs does not show any error, and $var(a) and $var(b) are unique.
Variables are working, but not the operations with the variables.
there is no
module needed to be loaded for that version.
Can you add xlog() lines to print the values of variables for each step, including the
$tU s.len transformation.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
4915
days inactive
4917
days old
4 comments
3 participants
participants (3)
-
Daniel-Constantin Mierla -
Klaus Darilion -
Omar