19 Jul
2007
19 Jul
'07
5:58 a.m.
Hi all,
Im trying to set up conditional call forwarding using an openser.cfg
created with sip:wizard on sipwise.com.
On ring-timeout before response 408 I receive a "500 I'm terribly sorry..."
message.
ngrep output:
----------------------------------------------------------------------
U proxyip:5060 -> clientip:1025
SIP/2.0 500 I'm terribly sorry, server error occurred (1/SL).
Via: SIP/2.0/UDP
clientip;branch=z9hG4bK0a0a2d5600000054469e38f600007d4800000065;rport=1025.
From: "unknown" <sip:9991@proxyip>;tag=6c5264b687a.
To: <sip:8888@proxyip>;tag=89c3d91cf34558b4440b4dea7bd37a3b.9860.
Call-ID: EDC29EF258D44A69818BF2960CF191360x0a0a2d56.
CSeq: 2 INVITE.
Server: OpenSer (1.1.1-notls (i386/linux)).
Content-Length: 0.
.
#
U proxyip:5060 -> clientip:1025
SIP/2.0 408 Request Timeout.
Via: SIP/2.0/UDP
clientip;branch=z9hG4bK0a0a2d5600000054469e38f600007d4800000065;rport=1025.
From: "unknown" <sip:9991@proxyip>;tag=6c5264b687a.
To: <sip:8888@proxyip>;tag=1da87856efbb12e9687f30fa08f307cb-9860.
Call-ID: EDC29EF258D44A69818BF2960CF191360x0a0a2d56.
CSeq: 2 INVITE.
Server: OpenSer (1.1.1-notls (i386/linux)).
Content-Length: 0.
-------------------------------------------------------------------------
With tail -f /var/log/message I see (output lines are cutted):
-------------------------------------------------------------------------
Jul 18 18:55:22 proxy /usr/sbin/openser[5615]: NAT-Reply - S=180 D=Ringing
F=sip....
Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: Redirect from UAC intercepted
- M=INVITE RURI=sip:....
Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: Clear callee preferences -
M=INVITE RURI=sip:....
Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: is_uri_host_local(): Branch
is missing, error in script Jul 18 18:55:26 proxy /usr/sbin/openser[5620]:
Call to foreign domain - M=INVITE RURI=sip:....
Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: Request leaving server,
D-URI='' - M=INVITE RURI=sip:....
Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: ERROR:tm:t_forward_nonack: no
branch for forwarding Jul 18 18:55:26 proxy /usr/sbin/openser[5620]:
ERROR:tm:w_t_relay: t_forward_nonack failed
--------------------------------------------------------------------------
How can I solve this problem?
Attached the routing section of openser.cfg (full file was too big for
mailing list).
Thanks in advance. Best regards.
--
Antonio
20 Jul
20 Jul
2:18 a.m.
Hi Antonio,
looks like a configuration error - probably there is a failure_route
where no branch is added before doing t_relay().
Regards,
Bogdan
Antonio Reale wrote:
Hi all,
I’m trying to set up conditional call forwarding using an openser.cfg
created with sip:wizard on sipwise.com.
On ring-timeout before response 408 I receive a "500 I'm terribly
sorry..."
message.
ngrep output:
----------------------------------------------------------------------
U proxyip:5060 -> clientip:1025
SIP/2.0 500 I'm terribly sorry, server error occurred (1/SL).
Via: SIP/2.0/UDP
clientip;branch=z9hG4bK0a0a2d5600000054469e38f600007d4800000065;rport=1025.
From: "unknown" <sip:9991@proxyip>;tag=6c5264b687a.
To: <sip:8888@proxyip>;tag=89c3d91cf34558b4440b4dea7bd37a3b.9860.
Call-ID: EDC29EF258D44A69818BF2960CF191360x0a0a2d56.
CSeq: 2 INVITE.
Server: OpenSer (1.1.1-notls (i386/linux)).
Content-Length: 0.
.
#
U proxyip:5060 -> clientip:1025
SIP/2.0 408 Request Timeout.
Via: SIP/2.0/UDP
clientip;branch=z9hG4bK0a0a2d5600000054469e38f600007d4800000065;rport=1025.
From: "unknown" <sip:9991@proxyip>;tag=6c5264b687a.
To: <sip:8888@proxyip>;tag=1da87856efbb12e9687f30fa08f307cb-9860.
Call-ID: EDC29EF258D44A69818BF2960CF191360x0a0a2d56.
CSeq: 2 INVITE.
Server: OpenSer (1.1.1-notls (i386/linux)).
Content-Length: 0.
-------------------------------------------------------------------------
With tail -f /var/log/message I see (output lines are cutted):
-------------------------------------------------------------------------
Jul 18 18:55:22 proxy /usr/sbin/openser[5615]: NAT-Reply - S=180 D=Ringing
F=sip....
Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: Redirect from UAC intercepted
- M=INVITE RURI=sip:....
Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: Clear callee preferences -
M=INVITE RURI=sip:....
Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: is_uri_host_local(): Branch
is missing, error in script Jul 18 18:55:26 proxy /usr/sbin/openser[5620]:
Call to foreign domain - M=INVITE RURI=sip:....
Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: Request leaving server,
D-URI='' - M=INVITE RURI=sip:....
Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: ERROR:tm:t_forward_nonack: no
branch for forwarding Jul 18 18:55:26 proxy /usr/sbin/openser[5620]:
ERROR:tm:w_t_relay: t_forward_nonack failed
--------------------------------------------------------------------------
How can I solve this problem?
Attached the routing section of openser.cfg (full file was too big for
mailing list).
Thanks in advance. Best regards.
--
Antonio
------------------------------------------------------------------------
########################################################################
# Request route 'main'
########################################################################
route[0]
{
xlog("L_INFO", "New request - M=$rm RURI=$ru F=$fu T=$tu IP=$si
ID=$ci\n");
force_rport();
if(msg:len > max_len)
{
xlog("L_INFO", "Message too big - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
sl_send_reply("513", "Message Too Big");
exit;
}
if (!mf_process_maxfwd_header("10"))
{
xlog("L_INFO", "Too many hops - M=$rm RURI=$ru F=$fu T=$tu
IP=$si ID=$ci\n");
sl_send_reply("483", "Too Many Hops");
exit;
}
if(!is_method("REGISTER"))
{
if(nat_uac_test("19"))
{
record_route(";nat=yes");
}
else
{
record_route();
}
}
if(is_method("CANCEL") || is_method("BYE"))
{
end_media_session();
}
if(loose_route())
{
if(!has_totag())
{
xlog("L_INFO", "Initial loose-routing rejected -
M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
sl_send_reply("403", "Initial Loose-Routing
Rejected");
exit;
}
if(nat_uac_test("19") ||
search("^Route:.*;nat=yes"))
{
fix_nated_contact();
setflag(6);
}
route(8);
}
if(is_method("REGISTER"))
{
route(7);
}
if(is_method("INVITE"))
{
route(9);
}
if(is_method("CANCEL") || is_method("ACK"))
{
route(15);
}
route(16);
}
########################################################################
# Request route 'clear-usr-preferences-caller'
########################################################################
route[1]
{
xlog("L_INFO", "Clear caller preferences - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
avp_delete("$avp(s:caller_cli)/g");
avp_delete("$avp(s:clir)/g");
}
########################################################################
# Request route 'clear-usr-preferences-callee'
########################################################################
route[2]
{
xlog("L_INFO", "Clear callee preferences - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
avp_delete("$avp(s:callee_fr_inv_timer)/g");
avp_delete("$avp(s:cfu)/g");
avp_delete("$avp(s:cfc)/g");
}
########################################################################
# Request route 'usr-preferences-caller'
########################################################################
route[3]
{
route(1);
xlog("L_INFO", "Load caller preferences for uuid
'$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
# load caller avps
avp_db_load("$avp(s:caller_uuid)", "*");
avp_copy("$avp(s:cli)", "$avp(s:caller_cli)/d");
if(is_avp_set("$avp(s:clir)/n") &&
avp_check("$avp(s:clir)", "eq/i:1"))
{
# mark for anonymization
setflag(28);
}
}
########################################################################
# Request route 'usr-preferences-callee'
########################################################################
route[4]
{
xlog("L_INFO", "Load callee preferences for uuid
'$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
# load callee avps
avp_db_load("$avp(s:callee_uuid)", "*");
if(is_avp_set("$avp(s:cfu)/s"))
{
xlog("L_INFO", "Call-forward-unconditional to
'$avp(s:cfu)' found - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
avp_delete("$avp(s:caller_uuid)/g");
avp_copy("$avp(s:callee_uuid)",
"$avp(s:caller_uuid)/d");
avp_pushto("$ru", "$avp(s:cfu)");
route(3);
route(10);
exit;
}
if(is_avp_set("$avp(s:ringtimeout)/n"))
{
xlog("L_INFO", "Setting ring timeout to
$avp(s:ringtimeout) secs - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
avp_copy("$avp(s:ringtimeout)",
"$avp(s:callee_fr_inv_timer)/d");
}
}
########################################################################
# Request route 'clir'
########################################################################
route[5]
{
if(isflagset(28) && !isflagset(27))
{
setflag(27);
xlog("L_INFO", "Anonymize caller - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
uac_replace_from("Anonymous","sip:anonymous@anonymous.invalid");
if(is_present_hf("Privacy"))
{
remove_hf("Privacy");
}
append_hf("Privacy: id\r\n");
}
}
########################################################################
# Request route 'stop-media-proxy'
########################################################################
route[6]
{
if(isflagset(22))
{
end_media_session();
}
}
########################################################################
# Request route 'base-route-register'
########################################################################
route[7]
{
sl_send_reply("100", "Trying");
if(!www_authorize("", "subscriber"))
{
xlog("L_INFO", "Register authentication failed - M=$rm
RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
www_challenge("", "0");
exit;
}
if(!check_to())
{
xlog("L_INFO", "Spoofed To-URI detected - M=$rm RURI=$ru
F=$fu T=$tu IP=$si ID=$ci\n");
sl_send_reply("403", "Spoofed To-URI Detected");
exit;
}
consume_credentials();
if(!search("^Contact:[ ]*\*") && nat_uac_test("19"))
{
fix_nated_register();
setflag(6);
}
if(!save("location"))
{
xlog("L_ERR", "Saving contact failed - M=$rm RURI=$ru
F=$fu T=$tu IP=$si ID=$ci\n");
sl_reply_error();
exit;
}
xlog("L_INFO", "Registration successful - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
exit;
}
########################################################################
# Request route 'base-outbound'
########################################################################
route[8]
{
if(is_present_hf("P-Asserted-Identity"))
{
remove_hf("P-Asserted-Identity");
}
if(is_present_hf("Remote-Party-ID"))
{
remove_hf("Remote-Party-ID");
}
if(is_avp_set("$avp(s:caller_cli)/s"))
{
if(!isflagset(28))
{
xlog("L_INFO", "Set caller CLI
'$avp(s:caller_cli)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
append_hf("P-Asserted-Identity:
<$avp(s:caller_cli)>\r\n");
}
}
route(5);
if(isflagset(6))
{
if(!isflagset(22) && !search("^Content-Length:[ ]*0"))
{
setflag(22);
use_media_proxy();
}
t_on_reply("2");
}
else
{
t_on_reply("1");
}
if(!isflagset(21))
{
t_on_failure("2");
}
if(isflagset(29))
{
append_branch();
}
if(is_present_hf("Proxy-Authorization"))
{
consume_credentials();
}
xlog("L_INFO", "Request leaving server, D-URI='$du' -
M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
if(!t_relay())
{
sl_reply_error();
if(is_method("INVITE") && isflagset(6))
{
end_media_session();
}
}
exit;
}
########################################################################
# Request route 'base-route-invite'
########################################################################
route[9]
{
sl_send_reply("100", "Trying");
if(from_gw())
{
avp_write("s:0", "$avp(s:caller_uuid)");
xlog("L_INFO", "Call from PSTN' - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
setflag(23);
}
else
{
if(allow_trusted())
{
if(is_avp_set("$avp(s:peer_uuid)/s"))
{
# use tag-column from trusted-table as uuid for this
caller
avp_copy("$avp(s:peer_uuid)",
"$avp(s:caller_uuid)/d");
}
else
{
# if no uuid is set, use "0" as default uuid
avp_write("s:0",
"$avp(s:caller_uuid)");
}
xlog("L_INFO", "Call from trusted peer with uuid
'$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
if(!is_domain_local("$ruri"))
{
xlog("L_INFO", "Rejecting peering attempt
with non-local request domain - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
sl_send_reply("403", "Relaying
Denied");
exit;
}
#setflag(23);
}
else
{
if(!proxy_authorize("", "subscriber"))
{
xlog("L_INFO", "Proxy authentication
failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
proxy_challenge("", "0");
exit;
}
if(!check_from())
{
xlog("L_INFO", "Spoofed From-URI detected
- M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
sl_send_reply("403", "Spoofed From-URI
Detected");
exit;
}
}
}
route(3);
if(nat_uac_test("19"))
{
fix_nated_contact();
setflag(6);
}
route(10);
}
########################################################################
# Request route 'invite-find-callee'
########################################################################
route[10]
{
if(alias_db_lookup("dbaliases"))
{
xlog("L_INFO", "Callee was aliased - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
}
route(2);
if(!is_domain_local("$ruri"))
{
setflag(20);
avp_write("s:0", "$avp(s:callee_uuid)");
route(12);
}
avp_delete("$avp(s:callee_uuid)");
avp_db_query("select uuid from subscriber where username =
'$rU'", "$avp(s:callee_uuid)");
if(is_avp_set("$avp(s:callee_uuid)/s"))
{
xlog("L_INFO", "Callee is local,
uuid='$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
route(11);
}
else
{
avp_write("s:0", "$avp(s:callee_uuid)");
xlog("L_INFO", "Callee is not local - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
route(12);
}
exit;
}
########################################################################
# Request route 'invite-to-internal'
########################################################################
route[11]
{
route(4);
if(!lookup("location"))
{
xlog("L_INFO", "Local user offline - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
sl_send_reply("404", "User Offline");
}
else
{
xlog("L_INFO", "Local user online - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
route(8);
}
exit;
}
########################################################################
# Request route 'invite-to-external'
########################################################################
route[12]
{
if(isflagset(20))
{
xlog("L_INFO", "Call to foreign domain - M=$rm RURI=$ru
F=$fu T=$tu IP=$si ID=$ci\n");
route(8);
exit;
}
route(14);
if(!isflagset(23))
{
# don't allow calls relaying from PSTN to PSTN, if not explicitely
forwarded
if(uri =~ "^sip:[0-9]+@")
{
# only route numeric users to PSTN
if(!load_gws())
{
xlog("L_ERR", "Error loading PSTN gateways
- M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
sl_send_reply("503", "PSTN Termination
Currently Unavailable");
exit;
}
if(!next_gw())
{
xlog("L_ERR", "No PSTN gateways available
- M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
sl_send_reply("503", "PSTN Termination
Currently Unavailable");
exit;
}
setflag(21);
t_on_failure("1");
route(8);
}
}
xlog("L_INFO", "Call to unknown user - M=$rm RURI=$ru F=$fu T=$tu
IP=$si ID=$ci\n");
sl_send_reply("404", "User Not Found");
exit;
}
########################################################################
# Request route 'normalize-e164'
########################################################################
route[13]
{
# European numbering plans look like this:
# CC = country code (i.e. 43 for Austria)
# NDC = national destination code (i.e. 1 for Vienna)
# SN = subscriber number (i.e. 4001234)
#
# CC + NDC + SN, i.e. 4314001234
#
# Within the same CC+NDC, it can be omitted, so if
# +4314001234 wants to call +4315002345, one can dial
# just 5002345.
#
# Within the same CC, CC can be ommitted and a "0" is prefixed
# to NDC, so if +4314001234 wants to call +4326003456,
# one can dial 026003456.
#
# For international calls, either "00" or + is prefixed, like
# +49123456780 or 0049123456789.
#
avp_delete("$avp(s:orig_callee_user)/g");
avp_write("$rU", "$avp(s:orig_callee_user)");
if(uri =~ "^sip:(\+[1-9])?[0-9]+@")
{
# looks like a PSTN number
if(uri =~ "^sip:0[1-9][0-9]+@")
{
# we have format 0+NDC+SN
strip(1);
prefix("+39");
}
else if(uri =~ "^sip:00[1-9]+@")
{
# we have format 00 + CC + NDC + SN
strip(2);
prefix("+");
}
else if(!uri =~ "^sip:\+[1-9][0-9]+@")
{
# unknown format, maybe NDC wasn't added before?
xlog("L_INFO", "Not normalized callee
'$avp(s:orig_callee_user)' to E.164 format - M=$rm RURI=$ru F=$fu T=$tu IP=$si
ID=$ci\n");
return(-1);
}
# else we have "+" + CC + NDC + SN
xlog("L_INFO", "Normalized callee
'$avp(s:orig_callee_user)' to E.164 format '$rU' - M=$rm RURI=$ru F=$fu
T=$tu IP=$si ID=$ci\n");
return(1);
}
else
{
xlog("L_INFO", "Not normalized callee
'$avp(s:orig_callee_user)' to E.164 format - M=$rm RURI=$ru F=$fu T=$tu IP=$si
ID=$ci\n");
return(-1);
}
}
########################################################################
# Request route 'lookup-enum'
########################################################################
route[14]
{
route(13);
if(retcode == 1)
{
if(enum_query("e164.org."))
{
# TODO: do GW fallback (load gws, set failure-route)?
xlog("L_INFO", "ENUM query succeeded - M=$rm
RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
route(8);
exit;
}
else
{
xlog("L_INFO", "ENUM query failed - M=$rm RURI=$ru
F=$fu T=$tu IP=$si ID=$ci\n");
# ENUM query failed, revert $rU
avp_pushto("$ru/username",
"$avp(s:orig_callee_user)");
}
}
}
########################################################################
# Request route 'base-route-local'
########################################################################
route[15]
{
t_on_reply("1");
if(t_check_trans())
{
xlog("L_INFO", "Request leaving server - M=$rm RURI=$ru
F=$fu T=$tu IP=$si ID=$ci\n");
if(!t_relay())
{
sl_reply_error();
}
}
else
{
xlog("L_INFO", "Dropping mis-routed request - M=$rm
RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
}
exit;
}
########################################################################
# Request route 'base-route-generic'
########################################################################
route[16]
{
xlog("L_INFO", "Method not supported - M=$rm RURI=$ru F=$fu T=$tu
IP=$si ID=$ci\n");
sl_send_reply("501", "Method Not Supported Here");
exit;
}
########################################################################
# Request route 'base-filter-failover'
########################################################################
route[17]
{
if(!t_check_status("408|500|503"))
{
xlog("L_INFO", "No failover routing needed for this
response code - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
route(6);
exit;
}
}
########################################################################
# Reply route 'base-standard-reply'
########################################################################
onreply_route[1]
{
xlog("L_INFO", "Reply - S=$rs D=$rr F=$fu T=$tu IP=$si
ID=$ci\n");
exit;
}
########################################################################
# Reply route 'base-nat-reply'
########################################################################
onreply_route[2]
{
xlog("L_INFO", "NAT-Reply - S=$rs D=$rr F=$fu T=$tu IP=$si
ID=$ci\n");
if(nat_uac_test("1"))
{
fix_nated_contact();
}
if(isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]")
{
if(!search("^Content-Length:[ ]*0"))
{
use_media_proxy();
}
}
exit;
}
########################################################################
# Failure route 'pstn-failover'
########################################################################
failure_route[1]
{
xlog("L_INFO", "Failure route for PSTN entered - M=$rm RURI=$ru
F=$fu T=$tu IP=$si ID=$ci\n");
route(17);
if(!next_gw())
{
xlog("L_ERR", "Failed to select next PSTN gateway - M=$rm
RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
route(6);
exit;
}
t_on_failure("1");
route(8);
}
########################################################################
# Failure route 'base-standard-failure'
########################################################################
failure_route[2]
{
if(t_check_status("422|481|487"))
{
xlog("L_INFO", "Final reply - M=$rm RURI=$ru F=$fu T=$tu
IP=$si ID=$ci\n");
route(6);
exit;
}
t_on_branch("1");
xlog("L_INFO", "Redirect from UAC intercepted - M=$rm RURI=$ru
F=$fu T=$tu IP=$si ID=$ci\n");
route(10);
if(avp_check("$avp(s:cfc)", "re/^.+$"))
{
avp_pushto("$ru", "$avp(s:cfc)");
setflag(29);
append_branch();
t_on_branch("1");
xlog("L_INFO", "CFC detected - M=$rm RURI=$ru F=$fu T=$tu
IP=$si ID=$ci\n");
route(10);
}
route(17);
route(6);
}
########################################################################
# Branch route 'cfc-drop-local'
########################################################################
branch_route[1]
{
if(!is_domain_local("$ruri"))
{
xlog("L_INFO", "Dropping local branch - M=$rm RURI=$ru
F=$fu T=$tu IP=$si ID=$ci\n");
drop();
}
}
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
7:51 a.m.
New subject: R: [OpenSER-Users] Bug or bad config?
Thanks for support.
I didn't see "CFC detected ..." in /var/log/messages. I tried to comment
the
line "route(10);" (as you can see below in the failure_route, now the cfc
block is executed and I can forward the call to a local user. If I set the
forwarding to a non local user the call must go through the PSTN gateway
(direct calls through the PSTN works fine), but I have a new error:
---------------------------------------------------------------------
Jul 19 18:33:20 proxy /usr/sbin/openser[11335]: Callee is not local -
M=INVITE RURI=sip:....
Jul 19 18:33:20 proxy /usr/sbin/openser[11335]: Not normalized callee
'3208513785' to E.164 format - M=INVITE RURI=sip:nonlocauser@proxyip....
Jul 19 18:33:20 proxy /usr/sbin/openser[11335]: next_gw(): No ruri_user AVP
Jul 19 18:33:20 proxy /usr/sbin/openser[11335]: No PSTN gateways available -
M=INVITE RURI=sip:nonlocauser@proxyip....
---------------------------------------------------------------------
Why the function next_gw() doesn't find the gateway?
How can I modify the actual failure_route to use conditional forwarding
without break the entire configuration?
Regards,
Antonio
########################################################################
# Failure route 'base-standard-failure'
########################################################################
failure_route[2]
{
if(t_check_status("422|481|487"))
{
xlog("L_INFO", "Final reply - M=$rm RURI=$ru F=$fu T=$tu
IP=$si ID=$ci\n");
route(6);
exit;
}
t_on_branch("1");
xlog("L_INFO", "Redirect from UAC intercepted - M=$rm RURI=$ru
F=$fu
T=$tu IP=$si ID=$ci\n");
route(10);
if(avp_check("$avp(s:cfc)", "re/^.+$"))
{
avp_pushto("$ru", "$avp(s:cfc)");
setflag(29);
append_branch();
t_on_branch("1");
xlog("L_INFO", "CFC detected - M=$rm RURI=$ru F=$fu T=$tu
IP=$si ID=$ci\n");
route(10);
}
route(17);
route(6);
}
########################################################################
-----Messaggio originale-----
Da: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro]
Inviato: venerdì 20 luglio 2007 8.19
A: Antonio Reale
Cc: users(a)openser.org
Oggetto: Re: [OpenSER-Users] Bug or bad config?
Hi Antonio,
looks like a configuration error - probably there is a failure_route
where no branch is added before doing t_relay().
Regards,
Bogdan
6236
days inactive
6237
days old
2 comments
2 participants
participants (2)
-
Antonio Reale -
Bogdan-Andrei Iancu