10 Nov
2004
10 Nov
'04
4:39 a.m.
Hello,
I must do a monitoring tool for a SER sip proxy. I have a user and a pass to
it. I can make calls with the combination.
Tests I-ve ran:
rhemaxos root # sipsak -n -s sip:me@myhost:5060 -v
SIP/2.0 200 OK
Via: SIP/2.0/UDP 127.0.0.1:1675;rport=
From: <sip:sipsak@127.0.0.1:1675>;tag=2fbba8ac
To: <sip:**************:5060>
CSeq: 1 OPTIONS
Call-ID: 800827564(a)127.0.0.1
Content-Length: 0
All seem ok
but if i run:
rhemaxos root # sipsak -I -U -n -s sip:me@myhost:5060 -v -a mypass
i get smth like:
Call-ID: 2105779733(a)127.0.0.1
WWW-Authenticate: DIGEST realm="whatever.com",
nonce="fde24b2e80f3f1c96ec8e962d34627d0", algorithm=MD5,
opaque="3251298552"
Content-Length: 0
error: couldn't find authentication method Digest in the 402 response above
The dumps (i use nast) from Xlite look a lot different.
Well, really beats me, i'm new to voip, and i really need help with this
one. It does not even try to AUTH me.
I know that is my fault, but i need some help with this one. I would not
like to read the SIP RFC just to monitor a SIP proxy. I have basic to medium
theoretical knowledge of the protocols and no experience in the wild.
Thank you in advance
Dragos
10 Nov
10 Nov
8:15 a.m.
Hey,
there is a Nagios plugin, I would look at it if I where you. it's kinda
nice :-)
To find it.. use google. :-)
-Atle
* Dragos CHIRIAC <dragos(a)pattco.ro> [041110 03:40]:
Hello,
I must do a monitoring tool for a SER sip proxy. I have a user and a pass to
it. I can make calls with the combination.
Tests I-ve ran:
rhemaxos root # sipsak -n -s sip:me@myhost:5060 -v
SIP/2.0 200 OK
Via: SIP/2.0/UDP 127.0.0.1:1675;rport=
From: <sip:sipsak@127.0.0.1:1675>;tag=2fbba8ac
To: <sip:**************:5060>
CSeq: 1 OPTIONS
Call-ID: 800827564(a)127.0.0.1
Content-Length: 0
All seem ok
but if i run:
rhemaxos root # sipsak -I -U -n -s sip:me@myhost:5060 -v -a mypass
i get smth like:
Call-ID: 2105779733(a)127.0.0.1
WWW-Authenticate: DIGEST realm="whatever.com",
nonce="fde24b2e80f3f1c96ec8e962d34627d0", algorithm=MD5,
opaque="3251298552"
Content-Length: 0
error: couldn't find authentication method Digest in the 402 response above
The dumps (i use nast) from Xlite look a lot different.
Well, really beats me, i'm new to voip, and i really need help with this
one. It does not even try to AUTH me.
I know that is my fault, but i need some help with this one. I would not
like to read the SIP RFC just to monitor a SIP proxy. I have basic to medium
theoretical knowledge of the protocols and no experience in the wild.
Thank you in advance
Dragos
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
9:58 a.m.
I know about it, but still have to make this work ( in order for that plugin
to work if i was to use it ). And i asked another questin :) (no heart
feelings). Sip will return via -N a nagios readable format, and that is all
about that plugin, returning 0 or 2 error codes. But i'm not eperienced with
SIP. I merged something like that with BigSister some time ago, it is easy.
Can somebody give me a real example (file included) that works ? the
SIPproxy will not try to auth, and i still do not know why. I've been
reading for the past 2 hours, but in vain. I guess i must mut some extra
parms in a _file_ and pass them via -f switch, but hell knows what sould i
write in there. :(.
---snip
rhemaxos archive # sipsak -U -n -s sip:lol2185060@69.20.x.x -v
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 127.0.0.1:1677;received=193.230.x.x;rport=1677
From: <sip:kayote2185060@69.20.x.x>;tag=80321e2
To: <sip:kayote2185060@69.20.x.x>
Kayote:
;seqNum=1;identifier=lol2185060;route-id=0;user=lol2185060;group=0;prev-ip=6
9.20.x.x ;orig-ip=69.20.x.x;NAT=0;orig-port=5070
CSeq: 1 REGISTER
Call-ID: 134423010(a)127.0.0.1
WWW-Authenticate: DIGEST realm="x.com",
nonce="515947f7824023019d8116c5f65668dc", algorithm=MD5,
opaque="745949767"
Content-Length: 0
error: couldn't find authentication method Digest in the 402 response above
--snip
the problem is : SIP/2.0 401 Unauthorized and Digest in the 402 response
above ???? i googled and find nothing cut crap. I read and ... u know, it's
easier to read the RFC in a couple of days than reading all that whatever
you want to call it about SIP. SIP and SDH/DWDM are poorely documended, and
everybody know this, i guess.(no need for links like
http://www.informatik.uni-bremen.de/~prelle/terena/cookbook/Cookbook_D2/
and Co, i already read them). The problem is taht this program must be done
in about ... whow, 3 hours from now. And i still ain got a clue abou hou to
see if authentificates ok, the rest is done.
I must generate smth like :
Digest username="jan", realm="iptel.org",
nonce="dcd98b7102dd2f0e8b11d0f600bfb0c093", uri="sip:iptel.org",
qop=auth, nc=00000001, cnonce="0a4f113b",
response="6629fae49393a05397450978507c4ef1", opaque=""
but i do not know how to do that with sipsak (generate a (forced ???) Digest
reponse).
Thank you in advance
Dragos
----- Original Message -----
From: "Atle Samuelsen" <clona(a)camaro.no>
To: "Dragos CHIRIAC" <dragos(a)pattco.ro>
Cc: <serusers(a)lists.iptel.org>
Sent: Wednesday, November 10, 2004 8:15 AM
Subject: Re: [Serusers] Newbie : SER and sipsak
Hey,
there is a Nagios plugin, I would look at it if I where you. it's kinda
nice :-)
To find it.. use google. :-)
-Atle
* Dragos CHIRIAC <dragos(a)pattco.ro> [041110 03:40]:
> Hello,
>
> I must do a monitoring tool for a SER sip proxy. I have a user and a
pass to
> it. I can make calls with the combination.
>
> Tests I-ve ran:
> rhemaxos root # sipsak -n -s sip:me@myhost:5060 -v
> SIP/2.0 200 OK
> Via: SIP/2.0/UDP 127.0.0.1:1675;rport=
> From: <sip:sipsak@127.0.0.1:1675>;tag=2fbba8ac
> To: <sip:**************:5060>
> CSeq: 1 OPTIONS
> Call-ID: 800827564(a)127.0.0.1
> Content-Length: 0
>
> All seem ok
>
> but if i run:
>
> rhemaxos root # sipsak -I -U -n -s sip:me@myhost:5060 -v -a mypass
>
> i get smth like:
>
> Call-ID: 2105779733(a)127.0.0.1
> WWW-Authenticate: DIGEST realm="whatever.com",
> nonce="fde24b2e80f3f1c96ec8e962d34627d0", algorithm=MD5,
opaque="3251298552"
> Content-Length: 0
>
> error: couldn't find authentication method Digest in the 402 response
above
>
> The dumps (i use nast) from Xlite look a lot different.
>
> Well, really beats me, i'm new to voip, and i really need help with this
> one. It does not even try to AUTH me.
> I know that is my fault, but i need some help with this one. I would not
> like to read the SIP RFC just to monitor a SIP proxy. I have basic to
medium
theoretical
knowledge of the protocols and no experience in the wild.
Thank you in advance
Dragos
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
11:21 p.m.
Hello Dragos,
I guess it is too late, the three hours are over, but you should read the
sipsak homepage: please contact me directly with questions about sipsak,
because I do not have the time any more to read the iptel mailing lists all
over (not to think about real time).
I do not understand your first problem report. If you resend the output of
sipsak with -vvv I will take a look at output. BTW -f does not help you
because with that parameter you can only load a SIP request from the given
file, no options.
The 401 from below has simply the problem that the word 'Digest' is in capital
letters and sipsak searches only for Digest with the first character as
capital. Unfortunately this is not easy to fix, as there are no
case-insensitive string search methods in glibc available (AFAIK).
Greetings
Nils
On Wednesday 10 November 2004 08:58, Dragos CHIRIAC wrote:
I know about it, but still have to make this work ( in
order for that
plugin to work if i was to use it ). And i asked another questin :) (no
heart feelings). Sip will return via -N a nagios readable format, and that
is all about that plugin, returning 0 or 2 error codes. But i'm not
eperienced with SIP. I merged something like that with BigSister some time
ago, it is easy.
Can somebody give me a real example (file included) that works ? the
SIPproxy will not try to auth, and i still do not know why. I've been
reading for the past 2 hours, but in vain. I guess i must mut some extra
parms in a _file_ and pass them via -f switch, but hell knows what sould i
write in there. :(.
---snip
rhemaxos archive # sipsak -U -n -s sip:lol2185060@69.20.x.x -v
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 127.0.0.1:1677;received=193.230.x.x;rport=1677
From: <sip:kayote2185060@69.20.x.x>;tag=80321e2
To: <sip:kayote2185060@69.20.x.x>
Kayote:
;seqNum=1;identifier=lol2185060;route-id=0;user=lol2185060;group=0;prev-ip=
6 9.20.x.x ;orig-ip=69.20.x.x;NAT=0;orig-port=5070
CSeq: 1 REGISTER
Call-ID: 134423010(a)127.0.0.1
WWW-Authenticate: DIGEST realm="x.com",
nonce="515947f7824023019d8116c5f65668dc", algorithm=MD5,
opaque="745949767"
Content-Length: 0
error: couldn't find authentication method Digest in the 402 response above
--snip
the problem is : SIP/2.0 401 Unauthorized and Digest in the 402 response
above ???? i googled and find nothing cut crap. I read and ... u know, it's
easier to read the RFC in a couple of days than reading all that whatever
you want to call it about SIP. SIP and SDH/DWDM are poorely documended, and
everybody know this, i guess.(no need for links like
http://www.informatik.uni-bremen.de/~prelle/terena/cookbook/Cookbook_D2/
and Co, i already read them). The problem is taht this program must be done
in about ... whow, 3 hours from now. And i still ain got a clue abou hou to
see if authentificates ok, the rest is done.
I must generate smth like :
Digest username="jan", realm="iptel.org",
nonce="dcd98b7102dd2f0e8b11d0f600bfb0c093", uri="sip:iptel.org",
qop=auth, nc=00000001, cnonce="0a4f113b",
response="6629fae49393a05397450978507c4ef1", opaque=""
but i do not know how to do that with sipsak (generate a (forced ???)
Digest reponse).
Thank you in advance
Dragos
----- Original Message -----
From: "Atle Samuelsen" <clona(a)camaro.no>
To: "Dragos CHIRIAC" <dragos(a)pattco.ro>
Cc: <serusers(a)lists.iptel.org>
Sent: Wednesday, November 10, 2004 8:15 AM
Subject: Re: [Serusers] Newbie : SER and sipsak
Hey,
there is a Nagios plugin, I would look at it if I where you. it's kinda
nice :-)
To find it.. use google. :-)
-Atle
* Dragos CHIRIAC <dragos(a)pattco.ro> [041110 03:40]:
> Hello,
>
> I must do a monitoring tool for a SER sip proxy. I have a user and a
pass to
> it. I can make calls with the combination.
>
> Tests I-ve ran:
> rhemaxos root # sipsak -n -s sip:me@myhost:5060 -v
> SIP/2.0 200 OK
> Via: SIP/2.0/UDP 127.0.0.1:1675;rport=
> From: <sip:sipsak@127.0.0.1:1675>;tag=2fbba8ac
> To: <sip:**************:5060>
> CSeq: 1 OPTIONS
> Call-ID: 800827564(a)127.0.0.1
> Content-Length: 0
>
> All seem ok
>
> but if i run:
>
> rhemaxos root # sipsak -I -U -n -s sip:me@myhost:5060 -v -a mypass
>
> i get smth like:
>
> Call-ID: 2105779733(a)127.0.0.1
> WWW-Authenticate: DIGEST realm="whatever.com",
> nonce="fde24b2e80f3f1c96ec8e962d34627d0", algorithm=MD5,
opaque="3251298552"
> Content-Length: 0
>
> error: couldn't find authentication method Digest in the 402 response
above
> The dumps (i use nast) from Xlite look a lot
different.
>
> Well, really beats me, i'm new to voip, and i really need help with
> this one. It does not even try to AUTH me.
> I know that is my fault, but i need some help with this one. I would
> not like to read the SIP RFC just to monitor a SIP proxy. I have basic
> to
medium
> theoretical knowledge of the protocols and
no experience in the wild.
>
> Thank you in advance
>
> Dragos
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7318
days inactive
7318
days old
3 comments
3 participants
participants (3)
-
Atle Samuelsen -
Dragos CHIRIAC -
Nils Ohlmeier