Hi bagdan

thanks for your help! I want to know if i have to use the two ways at the same moment, or each way is sufficient to have nat transversal work?

best regards!

Serge

Hi,

there are two ways to deal with nat traversal: 1) on the client side by using STUN 2) on server side by using a media relay : see the nathelper or mediaproxy modules in openser - in each directory you may find config examples.

regards, bogdan

messa@innsof.com wrote:

...

Hi all

 Thanks for your help. I make a test in local (one xlite

client calls another one, both in the same LAN than the openser) and everything goes well. But when i install openser in a machine with a public IP to make call between 2 clients in 2 differents LANs, i can't make a call. I don't know why? it is a client or an openser configuration problem?

Can you help me?

best regards!

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users

Hi all

I want to use nathelper for nat transversal. But when i make a call, i have this error:

0(11117) ERROR: force_rtp_proxy2: no available proxies 0(11117) ERROR: force_rtp_proxy2: no available proxies 0(11117) ERROR: force_rtp_proxy2: no available proxies 0(11117) ERROR: unforce_rtp_proxy: no available proxies 0(11117) ERROR: force_rtp_proxy2: no available proxies 0(11117) ERROR: unforce_rtp_proxy: no available proxies 0(11117) ERROR: force_rtp_proxy2: no available proxies 0(11117) ERROR: unforce_rtp_proxy: no available proxies 0(11117) ERROR: unforce_rtp_proxy: no available proxies 0(11117) ERROR: unforce_rtp_proxy: no available proxies 0(11117) ERROR: unforce_rtp_proxy: no available proxies 0(11117) ERROR: unforce_rtp_proxy: no available proxies

What's matter? does i install a rtp proxy in a host?

best regards!

Serge

Hi Serge,

one way should be enough.

regards, bogdan

messa@innsof.com wrote:

...

Hi bagdan

thanks for your help! I want to know if i have to use the two ways at the same moment, or each way is sufficient to have nat transversal work?

best regards!

Serge

...

Hi,

there are two ways to deal with nat traversal:

1. on the client side by using STUN
2. on server side by using a media relay : see the nathelper or

mediaproxy modules in openser - in each directory you may find config examples.

regards, bogdan

messa@innsof.com wrote:

...

Hi all

Thanks for your help. I make a test in local (one xlite

client calls another one, both in the same LAN than the openser) and everything goes well. But when i install openser in a machine with a public IP to make call between 2 clients in 2 differents LANs, i can't make a call. I don't know why? it is a client or an openser configuration problem?

Can you help me?

best regards!

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users