21 May
2014
21 May
'14
12:11 p.m.
Hi,
I registrar kamailio ofen can registrar .but at other wifi some time i use the csipsimple
registrar kamailio get request time out . when i look up the log I have found
ERROR: registrar [save.c:692]: update_contacts(): invalid cseq for aor <1008>
I search on google but can`t find a good answer. some one tell me it's not a same
callid and low cseq .
what would i do for this error ?
21 May
21 May
12:43 p.m.
New subject: i use the csipsimple registrar kamailio get request time out
vast writes:
ERROR: registrar [save.c:692]: update_contacts():
invalid cseq for aor <1008>
I search on google but can`t find a good answer. some one tell me it's not a same
callid and low cseq .
what would i do for this error
?
check with wireshark how the failing register request looks like and
compare it to previous one.
-- juha
3:55 p.m.
New subject: i use the csipsimple registrar kamailio get requesttime out
this is capture with tcpdump for the failing register request. what's wrong with
me?
------------------ Original ------------------
From: "Juha Heinanen";<jh(a)tutpro.com>pro.com>;
Date: Wed, May 21, 2014 05:43 PM
To: "Kamailio (SER) - Users Mailing List"<sr-users(a)lists.sip-router.org>ter.org>;
Subject: [SR-Users] i use the csipsimple registrar kamailio get requesttime out
vast writes:
ERROR: registrar [save.c:692]: update_contacts():
invalid cseq for aor <1008>
I search on google but can`t find a good answer. some one tell me it's not a same
callid and low cseq .
what would i do for this error
?
check with wireshark how the failing register request looks like and
compare it to previous one.
-- juha
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
.
22 May
22 May
9:39 a.m.
New subject: i use the csipsimple registrar kamailio get requesttime out
vast writes:
this is capture with tcpdump for the failing
register
request. what's wrong with me?
find out why your ua is sending register requests so frequently (every
few seconds). perhaps it is not receiving the 200 ok that kamailio is
sending.
if it is receiving 200 ok, then it should increment cseq for the same
callid when it send the next register request, but it does not do so,
which violates rfc3261.
-- juha
3844
days inactive
3845
days old
3 comments
2 participants
participants (2)
-
Juha Heinanen -
vast