nick wrote:

-------- Original Message -------- Subject: Re: [Users] Why is fix_nated_sdp appending 127.0.0.1 at the end of my c= lines? Date: Tue, 21 Nov 2006 16:46:42 +0100 From: nick nick@mobilia.it To: Ovidiu Sas sip.nslu@gmail.com References: 4562E2D7.7010403@mobilia.it 4562E82E.4070503@pernau.at 45631216.3000800@mobilia.it 6f497e130611210650i409e6cfblfb39b0d8a0b9f2e2@mail.gmail.com 45631873.8010400@mobilia.it 6f497e130611210724p4b3ead9bha95cb848c29d276c@mail.gmail.com

Ovidiu Sas wrote:

...

It seems that you are trying to do a double processing of the SDP (that's why you have 2 IPs inside SDP). Check you script if you use force_rtp_proxy and fix_nated_sdp at the same time.

Regards, Ovidiu Sas

On 11/21/06, nick nick@mobilia.it wrote:

...

Ovidiu Sas wrote:

...

check the '-d' argument. If you don't specify '-d', ngrep will only listen to one interface. '-d any' will force ngrep to listen to all interfaces, including the loopback.

Hope this helps, Ovidiu Sas

BTW, I changed my fix_nated_sdp() command to fix_nated_sdp("10") only, which is adding the origin IP instead of the mediaproxy one.. I don't mind this, but it still seems to be adding the 127.0.0.1

Actually, I'm using mediaproxy and fix_nated_sdp at the same time, I am using fix_nated_sdp because for some reason, mediaproxy isn't changing the SDP information in the SIP requests (or at least, it wasn't beforehand).

I'll have a look at where it might be overlapping.

whoops forgot to cc

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users

I'm not sure where it's overlapping, the only place I call both fix_nated_sdp() and use_media_proxy() together are in the reply route section..

The strange thing is, before I added in fix_nated_sdp(), there were no changes at all to the sdp string (they remained private IP addresses).

My .cfg is attached, can anyone point out where I might be forcing a loop?

Nick

#

# ----------- global configuration parameters ------------------------

debug=4 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) log_facility=LOG_LOCAL6

/* Uncomment these lines to enter debugging mode

fork=no log_stderror=yes

*/

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 listen=udp:89.XXX.XXX.16:5060 fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:SuEUbQ@localhost/openser"

# ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib64/openser/modules/mysql.so" loadmodule "/usr/local/lib64/openser/modules/domain.so" loadmodule "/usr/local/lib64/openser/modules/mediaproxy.so" loadmodule "/usr/local/lib64/openser/modules/sl.so" loadmodule "/usr/local/lib64/openser/modules/tm.so" loadmodule "/usr/local/lib64/openser/modules/acc.so" loadmodule "/usr/local/lib64/openser/modules/rr.so" loadmodule "/usr/local/lib64/openser/modules/maxfwd.so" loadmodule "/usr/local/lib64/openser/modules/usrloc.so" loadmodule "/usr/local/lib64/openser/modules/registrar.so" loadmodule "/usr/local/lib64/openser/modules/textops.so" loadmodule "/usr/local/lib64/openser/modules/xlog.so" loadmodule "/usr/local/lib64/openser/modules/uri.so" loadmodule "/usr/local/lib64/openser/modules/group.so" loadmodule "/usr/local/lib64/openser/modules/nathelper.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib64/openser/modules/auth.so" loadmodule "/usr/local/lib64/openser/modules/auth_db.so" # ----------------- setting module-specific parameters ---------------

# -- usrloc params -- modparam("group|domain|auth_db|usrloc|acc","db_url","mysql://openser:XXXX@localhost/openser")

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") #modparam("domain", "db_mode", 1) # Use caching modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain")

# -- acc params -- modparam("acc", "log_level", 3) # modparam("acc", "radius_flag", 1) # modparam("acc", "radius_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 1) modparam("acc", "service_type", 15) modparam("acc|group_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "db_flag", 3) modparam("acc", "db_missed_flag", 4)

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("mediaproxy", "sip_asymmetrics", "/usr/local/etc/openser/sip-asymmetrics-clients") modparam("mediaproxy", "rtp_asymmetrics", "/usr/local/etc/openser/rtp-asymmetrics-clients") modparam("registrar", "nat_flag", 5) modparam("mediaproxy", "natping_interval", 0)

modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 10) modparam("nathelper", "sipping_from", "sip:ping@mobilia.it")

modparam("registrar", "sip_natping_flag", 4)

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") setflag(1); record_route();

# subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); exit; };

# check for PSTN calls if(uri=~"sip:+?[0-9]{8,24}+@.*") { append_hf("P-hint: outbound\r\n"); route(2); exit; };

if (!is_uri_host_local()) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); exit; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_uri_host_local()) {

if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("sipserver.mobilia.it", "subscriber")) { www_challenge("sipserver.mobilia.it", "0"); exit; };

if (client_nat_test("3")) { setflag(5); setflag(4); force_rport(); fix_contact(); };

save("location"); exit;

};

lookup("aliases"); if (!is_uri_host_local()) { append_hf("P-hint: outbound alias\r\n"); route(1); exit; };

# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; };

if (method=="INVITE") { if (nat_uac_test("8")) { fix_nated_sdp("10"); }; t_on_failure("1"); } else if (method == "BYE" || method == "CANCEL") { end_media_session(); };

if (loose_route()) { if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; t_relay(); exit; };

if (client_nat_test("3") && !search("^Record-Route:")) { # Mark as NAT'ed force_rport(); fix_contact(); };

if (method=="INVITE") { t_on_reply("1"); };

if (method=="INVITE" || method=="ACK") { use_media_proxy(); };

if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); };

append_hf("P-hint: usrloc applied\r\n"); route(1);

}

route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

route[2] { # calls to pstn if(is_method("INVITE") && !has_totag()) { if (!is_user_in("From", "PSTN")) { sl_send_reply("403", "Forbidden PSTN"); exit; }; # set gateway address rewritehostport("84.XXX.XXX.XXX:5060"); route(1); }; }

failure_route[1] { end_media_session(); }

onreply_route[1] { if (status=~"(183)|(2[0-9][0-9])") { if (client_nat_test("1")) { fix_contact(); }; if (nat_uac_test("8")) { fix_nated_sdp("10"); }; use_media_proxy(); }; }