Hello, I'm sorry to come back again with this topic :( ... i've installed a new SER from cvs (rel_0_8_11) and when trying to register X-Lite 2.0, X-Lite does not send authentication information. As before, i can register an ATA186, a SNOM 100 phone and SIPPS but no X-Lite. I think the problem is in my X-Lite configuration and that it's my fault but after looking up and down i can't find the problem. This is X-Lite configuration: SIP Proxy Enabled: yes User Name: 1000 Authorization user: 1000 Password: 1000 Domain/Realm: voztelecom.net SIP Proxy: 192.168.1.2:5060 Out Bound Proxy: Proxy Mode: Normal Send Internal IP: Off These are the X-Lite logs. The most strange thing is that it does not answer the auth requests from SER (below is Cisco ATA REGISTER log and SER configuration): SEND >> 192.168.1.2:5060 REGISTER sip:voztelecom.net SIP/2.0 Via: SIP/2.0/UDP 192.168.1.203:5060 From: <sip:1000@voztelecom.net> To: <sip:1000@voztelecom.net> Contact: "JesusR" <sip:1000@192.168.1.203:5060> Call-ID: 3148BBBEBC4F47F2A43768FD845E6663(a)voztelecom.net CSeq: 11222 REGISTER Expires: 500 User-Agent: X-Lite build 1047 Content-Length: 0 RECEIVE << 192.168.1.2:5060 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.1.203:5060 From: <sip:1000@voztelecom.net> To: <sip:1000@voztelecom.net>;tag=b27e1a1d33761e85846fc98f5f3a7e58.d844 Call-ID: 3148BBBEBC4F47F2A43768FD845E6663(a)voztelecom.net CSeq: 11222 REGISTER WWW-Authenticate: Digest realm="voztelecom.net", nonce="3f1ebf0bae9c2713e34ed6c6c066884d61da2c46" Server: Sip EXpress router (0.8.11rc1 (i386/linux)) Content-Length: 0 Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27562 req_src_ip=192.168.1.203 req_src_port=5060 in_uri=sip:voztelecom.net out_uri=sip:voztelecom.net via_cnt==1" RECEIVE << 192.168.1.2:5060 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.1.203:5060 From: <sip:1000@voztelecom.net> To: <sip:1000@voztelecom.net>;tag=b27e1a1d33761e85846fc98f5f3a7e58.d844 Call-ID: 3148BBBEBC4F47F2A43768FD845E6663(a)voztelecom.net CSeq: 11222 REGISTER WWW-Authenticate: Digest realm="voztelecom.net", nonce="3f1ebf0bae9c2713e34ed6c6c066884d61da2c46" Server: Sip EXpress router (0.8.11rc1 (i386/linux)) Content-Length: 0 Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27563 req_src_ip=192.168.1.203 req_src_port=5060 in_uri=sip:voztelecom.net out_uri=sip:voztelecom.net via_cnt==1" SEND >> 192.168.1.2:5060 REGISTER sip:voztelecom.net SIP/2.0 Via: SIP/2.0/UDP 192.168.1.203:5060 From: <sip:1000@voztelecom.net> To: <sip:1000@voztelecom.net> Contact: "JesusR" <sip:1000@192.168.1.203:5060> Call-ID: 3148BBBEBC4F47F2A43768FD845E6663(a)voztelecom.net CSeq: 11224 REGISTER Expires: 500 User-Agent: X-Lite build 1047 Content-Length: 0 RECEIVE << 192.168.1.2:5060 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.1.203:5060 From: <sip:1000@voztelecom.net> To: <sip:1000@voztelecom.net>;tag=b27e1a1d33761e85846fc98f5f3a7e58.d844 Call-ID: 3148BBBEBC4F47F2A43768FD845E6663(a)voztelecom.net CSeq: 11224 REGISTER WWW-Authenticate: Digest realm="voztelecom.net", nonce="3f1ebf0fe0eb06e006bfa17508318525b23a1672" Server: Sip EXpress router (0.8.11rc1 (i386/linux)) Content-Length: 0 Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27562 req_src_ip=192.168.1.203 req_src_port=5060 in_uri=sip:voztelecom.net out_uri=sip:voztelecom.net via_cnt==1" RECEIVE << 192.168.1.2:5060 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.1.203:5060 From: <sip:1000@voztelecom.net> To: <sip:1000@voztelecom.net>;tag=b27e1a1d33761e85846fc98f5f3a7e58.d844 Call-ID: 3148BBBEBC4F47F2A43768FD845E6663(a)voztelecom.net CSeq: 11224 REGISTER WWW-Authenticate: Digest realm="voztelecom.net", nonce="3f1ebf0fe0eb06e006bfa17508318525b23a1672" Server: Sip EXpress router (0.8.11rc1 (i386/linux)) Content-Length: 0 Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27563 req_src_ip=192.168.1.203 req_src_port=5060 in_uri=sip:voztelecom.net out_uri=sip:voztelecom.net via_cnt==1" This is Cisco ATA REGISTER log which send the reply to auth request from SER: Trying 1st IP ADDR c0a80102 proxy=192.168.1.2:5060 [0]REGISTER Retry 0 [0:0] Tx Msg to 192.168.1.2:5060 REGISTER sip:192.168.1.2 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.202:5060 From: <sip:1001@192.168.1.2;user=phone>;tag=4183361925 To: <sip:1001@192.168.1.2;user=phone> Call-ID: 2881434130(a)192.168.1.202 CSeq: 1 REGISTER Contact: <sip:1001@192.168.1.202:5060;user=phone;transport=udp>;expires=60 User-Agent: Cisco ATA 186 v2.16 ata18x (030401a) Content-Length: 0 [0]Rx Msg from 192.168.1.2:5060 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.1.202:5060 From: <sip:1001@192.168.1.2;user=phone>;tag=4183361925 To: <sip:1001@192.168.1.2;user=phone>;tag=b27e1a1d33761e85846fc98f5f3a7e58.9cf4 Call-ID: 2881434130(a)192.168.1.202 CSeq: 1 REGISTER WWW-Authenticate: Digest realm="voztelecom.net", nonce="3f1ec1149f7590fd4532ba8c63a36a9123360fa0" Server: Sip EXpress router (0.8.11rc1 (i386/linux)) Content-Length: 0 Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27563 req_src_ip=192.168.1.202 req_src_port=5060 in_uri=sip:192.168.1.2 out_uri=sip:192.168.1.2 via_cnt==1" [0]Reg Resp 401; Unauthorized [0]REGISTER Retry 0 [0:0] Tx Msg to 192.168.1.2:5060 REGISTER sip:192.168.1.2 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.202:5060 From: <sip:1001@192.168.1.2;user=phone>;tag=4183361925 To: <sip:1001@192.168.1.2;user=phone> Call-ID: 2881434130(a)192.168.1.202 CSeq: 2 REGISTER Contact: <sip:1001@192.168.1.202:5060;user=phone;transport=udp>;expires=60 User-Agent: Cisco ATA 186 v2.16 ata18x (030401a) Authorization: Digest username="1001",realm="voztelecom.net",nonce="3f1ec1149f7590fd4532ba8c63a36a9123360fa0",uri="sip:192.168.1.2",response="9cedb192d83009a19e3bf610c2d13b85" Content-Length: 0 [0]Rx Msg from 192.168.1.2:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 192.168.1.202:5060 From: <sip:1001@192.168.1.2;user=phone>;tag=4183361925 To: <sip:1001@192.168.1.2;user=phone>;tag=b27e1a1d33761e85846fc98f5f3a7e58.9cf4 Call-ID: 2881434130(a)192.168.1.202 CSeq: 2 REGISTER Contact: <sip:1001@192.168.1.202:5060;user=phone;transport=udp>;q=0.00;expires=60 Server: Sip EXpress router (0.8.11rc1 (i386/linux)) Content-Length: 0 Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=27562 req_src_ip=192.168.1.202 req_src_port=5060 in_uri=sip:192.168.1.2 out_uri=sip:192.168.1.2 via_cnt==1" [0]Reg Resp 200; OK [0]Reg OK (60) And this is SER configuration: # # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc","db_url","sql://ser:heslo@192.168.1.3/ser") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db","db_url","sql://ser:heslo@192.168.1.3/ser") modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic alias="voztelecom.net" alias="devel.voztelecom.net" alias="192.168.1.2" route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { # if (uri=~"voztelecom.net" || uri=~"192\.168\.1\.2") { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("voztelecom.net", "subscriber")) { www_challenge("voztelecom.net", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Thanks in advance for your help. Saludos JesusR. ------------------------------- Jesus Rodriguez VozTelecom Sistemas, S.L. jesusr(a)voztele.com http://www.voztele.com Tel. 902360305 ------------------------------- _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers