29 May
2013
29 May
'13
6:32 p.m.
Hi guys,
I need to implement a call forwarding (blind call forward) in a
kamailio.
Do you know if this is possible? There is a way that allow the
subscriber to configure it's own forwarding ?
Thanks in advance,
Lucas
7 Jun
7 Jun
12:34 p.m.
Hello,
you can do call forwarding with kamailio, no problem. In config file you
have to execute call forwarding actions before handling user location.
You have to store somewhere the details, one way is in usr_preferences
table and then load the new address with avpops. You can store in any
table you want and use sqlops for loading the address. If you want to do
with caching, then look at htable module.
Cheers,
Daniel
On 5/29/13 5:32 PM, Lucas Girard wrote:
Hi guys,
I need to implement a call forwarding (blind call forward) in a kamailio.
Do you know if this is possible? There is a way that allow the
subscriber to configure it's own forwarding ?
Thanks in advance,
Lucas
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013
* http://asipto.com/u/katu *
6:28 p.m.
Thanks Daniel!
I have configured and its working fine.
I am adding details in case someone else needs the same:
Setup:
loadmodule "avpops.so"
modparam("avpops","db_url","mysql://openser:openserrw@localhost/kamailio")
modparam("avpops","avp_table","usr_preferences")
*33 to enable:
if ($rU=~"^\*33.*") {
strip(3);
avp_printf("$avp(s:fwd_blind)","$ruri");
.......
avp_db_delete("$from/username","$avp(s:fwd_blind)");
avp_db_store("$from/username","$avp(s:fwd_blind)");
sl_send_reply("404","CFWD Set");
....}
*32 to disable:
if ($rU=~"^\*32") {
avp_db_delete("$from/username","$avp(s:fwd_blind)");
sl_send_reply("404","CFWD UnSet");
...... }
Forwarding:
if (avp_db_load("$ruri/username", "$avp(s:fwd_blind)")) {
$from=$ruri;
avp_pushto("$ruri", "$avp(s:fwd_blind)");
...
route(RELAY);
....
Thanks!
Lucas Girard
On Fri, 2013-06-07 at 11:34 +0200, Daniel-Constantin Mierla wrote:
Hello,
you can do call forwarding with kamailio, no problem. In config file
you have to execute call forwarding actions before handling user
location.
You have to store somewhere the details, one way is in usr_preferences
table and then load the new address with avpops. You can store in any
table you want and use sqlops for loading the address. If you want to
do with caching, then look at htable module.
Cheers,
Daniel
On 5/29/13 5:32 PM, Lucas Girard wrote:
Hi guys,
I need to implement a call forwarding (blind call forward) in a
kamailio.
Do you know if this is possible? There is a way that allow the
subscriber to configure it's own forwarding ?
Thanks in advance,
Lucas
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013
* http://asipto.com/u/katu *
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
10 Jun
10 Jun
10:10 a.m.
Hello,
really appreciating such feedback, it will help others looking for same
solution.
If you don't mind and have time, you can add it as a mini-howto in the wiki:
- http://www.kamailio.org/wiki/tutorials/mini-howto-admin/main
Cheers,
Daniel
On 6/7/13 5:28 PM, Lucas Girard wrote:
Thanks Daniel!
I have configured and its working fine.
I am adding details in case someone else needs the same:
/_Setup:_/
/loadmodule "avpops.so"/
/modparam("avpops","db_url","mysql://openser:openserrw@localhost
<mailto:openserrw@localhost>/kamailio")/
/modparam("avpops","avp_table","usr_preferences")/
/_*33 to enable:_/
/ if ($rU=~"^\*33.*") {/
/ strip(3);/
/ avp_printf("$avp(s:fwd_blind)","$ruri");/
/ ......./
/avp_db_delete("$from/username","$avp(s:fwd_blind)");/
/avp_db_store("$from/username","$avp(s:fwd_blind)");/
/ sl_send_reply("404","CFWD Set");/
/ ....}/
//
/_*32 to disable:_/
/ if ($rU=~"^\*32") {/
/avp_db_delete("$from/username","$avp(s:fwd_blind)");/
/ sl_send_reply("404","CFWD UnSet");/
/ ...... }/
/_Forwarding:_/
/if (avp_db_load("$ruri/username", "$avp(s:fwd_blind)")) {/
/ $from=$ruri;/
/ avp_pushto("$ruri", "$avp(s:fwd_blind)");/
/ .../
/ route(RELAY);/
/ ..../
Thanks!
Lucas Girard
On Fri, 2013-06-07 at 11:34 +0200, Daniel-Constantin Mierla wrote:
> Hello,
>
> you can do call forwarding with kamailio, no problem. In config file
> you have to execute call forwarding actions before handling user
> location.
>
> You have to store somewhere the details, one way is in
> usr_preferences table and then load the new address with avpops. You
> can store in any table you want and use sqlops for loading the
> address. If you want to do with caching, then look at htable module.
>
> Cheers,
> Daniel
>
> On 5/29/13 5:32 PM, Lucas Girard wrote:
>
>> Hi guys,
>> I need to implement a call forwarding (blind call forward) in a
>> kamailio.
>> Do you know if this is possible? There is a way that allow the
>> subscriber to configure it's own forwarding ?
>> Thanks in advance,
>>
>> Lucas
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla -http://www.asipto.com
> http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda>
-http://www.linkedin.com/in/miconda
> Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013
> *http://asipto.com/u/katu *
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013
* http://asipto.com/u/katu *
12 Jun
12 Jun
7:08 p.m.
It's done Daniel, I have added the notes to the wiki.
Regards,
Lucas Girard
On Mon, 2013-06-10 at 09:10 +0200, Daniel-Constantin Mierla wrote:
Hello,
really appreciating such feedback, it will help others looking for
same solution.
If you don't mind and have time, you can add it as a mini-howto in the
wiki:
- http://www.kamailio.org/wiki/tutorials/mini-howto-admin/main
Cheers,
Daniel
On 6/7/13 5:28 PM, Lucas Girard wrote:
Thanks Daniel!
I have configured and its working fine.
I am adding details in case someone else needs the same:
Setup:
loadmodule "avpops.so"
modparam("avpops","db_url","mysql://openser:openserrw@localhost/kamailio")
modparam("avpops","avp_table","usr_preferences")
*33 to enable:
if ($rU=~"^\*33.*") {
strip(3);
avp_printf("$avp(s:fwd_blind)","$ruri");
.......
avp_db_delete("$from/username","$avp(s:fwd_blind)");
avp_db_store("$from/username","$avp(s:fwd_blind)");
sl_send_reply("404","CFWD Set");
....}
*32 to disable:
if ($rU=~"^\*32") {
avp_db_delete("$from/username","$avp(s:fwd_blind)");
sl_send_reply("404","CFWD UnSet");
...... }
Forwarding:
if (avp_db_load("$ruri/username", "$avp(s:fwd_blind)")) {
$from=$ruri;
avp_pushto("$ruri", "$avp(s:fwd_blind)");
...
route(RELAY);
....
Thanks!
Lucas Girard
On Fri, 2013-06-07 at 11:34 +0200, Daniel-Constantin Mierla wrote:
> Hello,
>
> you can do call forwarding with kamailio, no problem. In config
> file you have to execute call forwarding actions before handling
> user location.
>
> You have to store somewhere the details, one way is in
> usr_preferences table and then load the new address with avpops.
> You can store in any table you want and use sqlops for loading the
> address. If you want to do with caching, then look at htable
> module.
>
> Cheers,
> Daniel
>
> On 5/29/13 5:32 PM, Lucas Girard wrote:
>
>
> > Hi guys,
> > I need to implement a call forwarding (blind call forward) in a
> > kamailio.
> > Do you know if this is possible? There is a way that allow the
> > subscriber to configure it's own forwarding ?
> > Thanks in advance,
> >
> > Lucas
> >
> >
> > _______________________________________________
> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> > sr-users(a)lists.sip-router.org
> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> --
> Daniel-Constantin Mierla - http://www.asipto.com
> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013
> * http://asipto.com/u/katu *
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013
* http://asipto.com/u/katu *
4184
days inactive
4198
days old
4 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Lucas Girard