Hi All,
if someone has a working .cfg of ser used with pdt module to translate prefixes to domains please send me, I'm in deep troubles with that and I cant seem to find the way out.
Tnx !
Hello,
a trivial config file can be found in sip_router/modules/pdt/doc/pdt.cfg.
Also check out the documentation at:
http://iptel.org/ser/doc/modules/html/pdt.html
Jan.
On 13-11 17:44, Alessio Focardi wrote:
Hi All,
if someone has a working .cfg of ser used with pdt module to translate prefixes to domains please send me, I'm in deep troubles with that and I cant seem to find the way out.
Tnx !
-- Best regards, Alessio mailto:alessiof@interconnessioni.it
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Just a question:
do I have to set up an instance of ser that does pdt translation and then forwards to the "real" ser instance on another port ?
As you may know translation is working fine here, but I cant connect to users otside my domain since i get a "403 no relay" error, this is happenig translating a prefix to an iptel.org address.
If I dial the iptel address (number@iptel.or) using xlite call is handled fine, but if i use "prefix-number" from a grandstream phone ... no way.
Tnx for the support!
JJ> Hello,
JJ> a trivial config file can be found in JJ> sip_router/modules/pdt/doc/pdt.cfg.
JJ> Also check out the documentation at:
JJ> http://iptel.org/ser/doc/modules/html/pdt.html
JJ> Jan.
JJ> On 13-11 17:44, Alessio Focardi wrote:
Hi All,
if someone has a working .cfg of ser used with pdt module to translate prefixes to domains please send me, I'm in deep troubles with that and I cant seem to find the way out.
Tnx !
-- Best regards, Alessio mailto:alessiof@interconnessioni.it
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hello, the problem might be in iptel configuration -- regarding the policy of accepting the requests. I will try to reproduce the case it but I don't have time right now. You can try same scenario with other free SIP providers, like fwd.pulver.com.
On 11/14/2003 9:06 AM, Alessio Focardi wrote:
Just a question:
do I have to set up an instance of ser that does pdt translation and then forwards to the "real" ser instance on another port ?
Not really. It should work with the same instance of ser.
Best regards, }Daniel
As you may know translation is working fine here, but I cant connect to users otside my domain since i get a "403 no relay" error, this is happenig translating a prefix to an iptel.org address.
If I dial the iptel address (number@iptel.or) using xlite call is handled fine, but if i use "prefix-number" from a grandstream phone ... no way.
Tnx for the support!
JJ> Hello,
JJ> a trivial config file can be found in JJ> sip_router/modules/pdt/doc/pdt.cfg.
JJ> Also check out the documentation at:
JJ> http://iptel.org/ser/doc/modules/html/pdt.html
JJ> Jan.
JJ> On 13-11 17:44, Alessio Focardi wrote:
Hi All,
if someone has a working .cfg of ser used with pdt module to translate prefixes to domains please send me, I'm in deep troubles with that and I cant seem to find the way out.
Tnx !
-- Best regards, Alessio mailto:alessiof@interconnessioni.it
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Now its working, I made some tests with pulver and all went ok !
Tnx for the suppport.
DCM> Hello, DCM> the problem might be in iptel configuration -- regarding the policy of DCM> accepting the requests. I will try to reproduce the case it but I don't DCM> have time right now. You can try same scenario with other free SIP DCM> providers, like fwd.pulver.com.
DCM> On 11/14/2003 9:06 AM, Alessio Focardi wrote:
Just a question:
do I have to set up an instance of ser that does pdt translation and then forwards to the "real" ser instance on another port ?
DCM> Not really. It should work with the same instance of ser.
DCM> Best regards, DCM> }Daniel
As you may know translation is working fine here, but I cant connect to users otside my domain since i get a "403 no relay" error, this is happenig translating a prefix to an iptel.org address.
If I dial the iptel address (number@iptel.or) using xlite call is handled fine, but if i use "prefix-number" from a grandstream phone ... no way.
Tnx for the support!
JJ> Hello,
JJ> a trivial config file can be found in JJ> sip_router/modules/pdt/doc/pdt.cfg.
JJ> Also check out the documentation at:
JJ> http://iptel.org/ser/doc/modules/html/pdt.html
JJ> Jan.
JJ> On 13-11 17:44, Alessio Focardi wrote:
Hi All,
if someone has a working .cfg of ser used with pdt module to translate prefixes to domains please send me, I'm in deep troubles with that and I cant seem to find the way out.
Tnx !
-- Best regards, Alessio mailto:alessiof@interconnessioni.it
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi Alessio,
I just tried a configuration similar to the one you described: form an outside domain, doing pdt translation, to call to iptel.org. It work.
Just to be sure about what is going wrong, please make some network dump with your rejected call to iptel and send it to us.
Regards, Bogdan
Alessio Focardi wrote:
Now its working, I made some tests with pulver and all went ok !
Tnx for the suppport.
DCM> Hello, DCM> the problem might be in iptel configuration -- regarding the policy of DCM> accepting the requests. I will try to reproduce the case it but I don't DCM> have time right now. You can try same scenario with other free SIP DCM> providers, like fwd.pulver.com.
DCM> On 11/14/2003 9:06 AM, Alessio Focardi wrote:
Just a question:
do I have to set up an instance of ser that does pdt translation and then forwards to the "real" ser instance on another port ?
DCM> Not really. It should work with the same instance of ser.
DCM> Best regards, DCM> }Daniel
As you may know translation is working fine here, but I cant connect to users otside my domain since i get a "403 no relay" error, this is happenig translating a prefix to an iptel.org address.
If I dial the iptel address (number@iptel.or) using xlite call is handled fine, but if i use "prefix-number" from a grandstream phone ... no way.
Tnx for the support!
JJ> Hello,
JJ> a trivial config file can be found in JJ> sip_router/modules/pdt/doc/pdt.cfg.
JJ> Also check out the documentation at:
JJ> http://iptel.org/ser/doc/modules/html/pdt.html
JJ> Jan.
JJ> On 13-11 17:44, Alessio Focardi wrote:
Hi All,
if someone has a working .cfg of ser used with pdt module to translate prefixes to domains please send me, I'm in deep troubles with that and I cant seem to find the way out.
Tnx !
-- Best regards, Alessio mailto:alessiof@interconnessioni.it
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
I restarted from scracth with my ser .cfg, and with some surprise now it works fine with iptel.org.
I'm sorry to have allarmed you ...
Also I managed to route calls to offiline/busy users to asterisk, with voicemail messages retr by phone.
My next step will be convincing asterisk to use a database for mailbox configuration (possibly ser's one) instead of a text file (that has to be updated manually for each new user).
Again I'm expressing my gratitude for the amount of support I'm getting from the community!
BAI> Hi Alessio,
BAI> I just tried a configuration similar to the one you described: form an BAI> outside domain, doing pdt translation, to call to iptel.org. It work.
BAI> Just to be sure about what is going wrong, please make some network dump BAI> with your rejected call to iptel and send it to us.
BAI> Regards, BAI> Bogdan
BAI> Alessio Focardi wrote:
Now its working, I made some tests with pulver and all went ok !
Tnx for the suppport.
DCM> Hello, DCM> the problem might be in iptel configuration -- regarding the policy of DCM> accepting the requests. I will try to reproduce the case it but I don't DCM> have time right now. You can try same scenario with other free SIP DCM> providers, like fwd.pulver.com.
DCM> On 11/14/2003 9:06 AM, Alessio Focardi wrote:
Just a question:
do I have to set up an instance of ser that does pdt translation and then forwards to the "real" ser instance on another port ?
DCM> Not really. It should work with the same instance of ser.
DCM> Best regards, DCM> }Daniel
As you may know translation is working fine here, but I cant connect to users otside my domain since i get a "403 no relay" error, this is happenig translating a prefix to an iptel.org address.
If I dial the iptel address (number@iptel.or) using xlite call is handled fine, but if i use "prefix-number" from a grandstream phone ... no way.
Tnx for the support!
JJ> Hello,
JJ> a trivial config file can be found in JJ> sip_router/modules/pdt/doc/pdt.cfg.
JJ> Also check out the documentation at:
JJ> http://iptel.org/ser/doc/modules/html/pdt.html
JJ> Jan.
JJ> On 13-11 17:44, Alessio Focardi wrote:
Hi All,
if someone has a working .cfg of ser used with pdt module to translate prefixes to domains please send me, I'm in deep troubles with that and I cant seem to find the way out.
Tnx !
-- Best regards, Alessio mailto:alessiof@interconnessioni.it
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
I suppose too that the error had something to do with the INVITE sent. We don't honor transit request from one to another domain, none of them related to iptel.
-jiro
At 10:05 PM 11/14/2003, Bogdan-Andrei IANCU wrote:
Hi Alessio,
I just tried a configuration similar to the one you described: form an outside domain, doing pdt translation, to call to iptel.org. It work.
Just to be sure about what is going wrong, please make some network dump with your rejected call to iptel and send it to us.
Regards, Bogdan
Alessio Focardi wrote:
Now its working, I made some tests with pulver and all went ok !
Tnx for the suppport.
DCM> Hello, DCM> the problem might be in iptel configuration -- regarding the policy of DCM> accepting the requests. I will try to reproduce the case it but I don't DCM> have time right now. You can try same scenario with other free SIP DCM> providers, like fwd.pulver.com.
DCM> On 11/14/2003 9:06 AM, Alessio Focardi wrote:
Just a question:
do I have to set up an instance of ser that does pdt translation and then forwards to the "real" ser instance on another port ?
DCM> Not really. It should work with the same instance of ser.
DCM> Best regards, DCM> }Daniel
As you may know translation is working fine here, but I cant connect to users otside my domain since i get a "403 no relay" error, this is happenig translating a prefix to an iptel.org address.
If I dial the iptel address (number@iptel.or) using xlite call is handled fine, but if i use "prefix-number" from a grandstream phone ... no way.
Tnx for the support!
JJ> Hello,
JJ> a trivial config file can be found in JJ> sip_router/modules/pdt/doc/pdt.cfg.
JJ> Also check out the documentation at:
JJ> http://iptel.org/ser/doc/modules/html/pdt.html
JJ> Jan.
JJ> On 13-11 17:44, Alessio Focardi wrote:
Hi All,
if someone has a working .cfg of ser used with pdt module to translate prefixes to domains please send me, I'm in deep troubles with that and I cant seem to find the way out.
Tnx !
-- Best regards, Alessio mailto:alessiof@interconnessioni.it
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Jiri Kuthan http://iptel.org/~jiri/
-
Alessio Focardi -
Bogdan-Andrei IANCU -
Daniel-Constantin Mierla -
Jan Janak -
Jiri Kuthan