17 Sep
2018
17 Sep
'18
4:48 a.m.
Hi
I'm building some system with failover trunk
but my providers requires to set their doamin in domain part of To Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER
my To filed looks like
To: <sip: 123(a)my.failover.providermy.main.provider>
what i tried:
Move this change to BRANCH_ROUTE:
here tried as
$td = as
uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants
But result is the same
kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080
flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC,
Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024,
BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: d06080
compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
17 Sep
17 Sep
5:22 a.m.
The $td is read-only variable, and yoou could not change it's value.
If you want to change domain in To header, You should use testops
module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <ovoshlook(a)gmail.com> wrote:
Hi
I'm building some system with failover trunk
but my providers requires to set their doamin in domain part of To Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER
my To filed looks like
To: <sip: 123(a)my.failover.providermy.main.provider>
what i tried:
Move this change to BRANCH_ROUTE:
here tried as
$td = as
uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants
But result is the same
kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080
flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE,
USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC,
DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER,
USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535,
DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: d06080
compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
5:25 a.m.
But I rewrites succesfully with request_route Flow.
Im rewriting it with out any issues
пн, 17 сент. 2018 г., 12:23 Mojtaba <mespio(a)gmail.com>om>:
The $td is read-only variable, and yoou could not
change it's value.
If you want to change domain in To header, You should use testops
module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
Hi
I'm building some system with failover trunk
but my providers requires to set their doamin in domain part of To Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER
my To filed looks like
To: <sip: 123(a)my.failover.providermy.main.provider>
what i tried:
Move this change to BRANCH_ROUTE:
here tried as
$td = as
uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants
But result is the same
kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080
flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC,
Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE
262144 MAX_URI_SIZE 1024,
BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et,
sigio_rt, select.
id: d06080
compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
5:28 a.m.
That is not a safe way to change the To header, since proxies aren't supposed to
modify the To or From headers.
The proper approach conceals the fact that modifications have taken place from the
caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_…
--
Sent from mobile. Apologies for brevity and errors.
-----Original Message-----
From: Mojtaba <mespio(a)gmail.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Sent: Mon, 17 Sep 2018 5:23 AM
Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value.
If you want to change domain in To header, You should use testops
module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <ovoshlook(a)gmail.com> wrote:
Hi
I'm building some system with failover trunk
but my providers requires to set their doamin in domain part of To Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER
my To filed looks like
To: <sip: 123(a)my.failover.providermy.main.provider>
what i tried:
Move this change to BRANCH_ROUTE:
here tried as
$td = as
uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants
But result is the same
kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080
flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE,
USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC,
DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER,
USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535,
DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: d06080
compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
6:03 a.m.
I tried uac_replace_to()
But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov <abalashov(a)evaristesys.com>om>:
That is not a safe way to change the To header, since
proxies aren't
supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken place
from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_…
--
Sent from mobile. Apologies for brevity and errors.
-----Original Message-----
From: Mojtaba <mespio(a)gmail.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Sent: Mon, 17 Sep 2018 5:23 AM
Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value.
If you want to change domain in To header, You should use testops
module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
Hi
I'm building some system with failover trunk
but my providers requires to set their doamin in domain part of To Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER
my To filed looks like
To: <sip: 123(a)my.failover.providermy.main.provider>
what i tried:
Move this change to BRANCH_ROUTE:
here tried as
$td = as
uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants
But result is the same
kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080
flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC,
Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE
262144 MAX_URI_SIZE 1024,
BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et,
sigio_rt, select.
id: d06080
compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
7:23 a.m.
From which route are you calling uac_replace_to(),
failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
I tried uac_replace_to()
But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov <abalashov(a)evaristesys.com>om>:
That is not a safe way to change the To header,
since proxies aren't
supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken place
from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_…
--
Sent from mobile. Apologies for brevity and errors.
-----Original Message-----
From: Mojtaba <mespio(a)gmail.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Sent: Mon, 17 Sep 2018 5:23 AM
Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value.
If you want to change domain in To header, You should use testops
module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi
I'm building some system with failover trunk
but my providers requires to set their doamin in domain part of To
Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER
my To filed looks like
To: <sip: 123(a)my.failover.providermy.main.provider>
what i tried:
Move this change to BRANCH_ROUTE:
here tried as
$td = as
uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants
But result is the same
kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080
flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP,
PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE
262144 MAX_URI_SIZE
1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et,
sigio_rt, select.
id: d06080
compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
7:32 a.m.
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga <pojogas(a)gmail.com>om>:
From which route are you calling uac_replace_to(),
failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
I tried uac_replace_to()
But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov <abalashov(a)evaristesys.com>om>:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
That is not a safe way to change the To header,
since proxies aren't
supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken
place from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_…
--
Sent from mobile. Apologies for brevity and errors.
-----Original Message-----
From: Mojtaba <mespio(a)gmail.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Sent: Mon, 17 Sep 2018 5:23 AM
Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value.
If you want to change domain in To header, You should use testops
module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi
I'm building some system with failover trunk
but my providers requires to set their doamin in domain part of To
Header
so when I rewrite it at the my failure_route
$td = FAILOVER_PROVIDER
my To filed looks like
To: <sip: 123(a)my.failover.providermy.main.provider>
what i tried:
Move this change to BRANCH_ROUTE:
here tried as
$td = as
uac_replace_to('',"newToFieldValue)
Move to the my custom route with both variants
But result is the same
kamailio 5.1
version: kamailio 5.1.5 (x86_64/linux) d06080
flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP,
PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE
262144 MAX_URI_SIZE
1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et,
sigio_rt, select.
id: d06080
compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
7:40 a.m.
Ok, what are your UAC parameters?
On Mon, Sep 17, 2018 at 7:34 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga <pojogas(a)gmail.com>om>:
From which route are you calling
uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
I tried uac_replace_to()
But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov <abalashov(a)evaristesys.com>om>:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
That is not a safe way to change the To header,
since proxies aren't
supposed to modify the To or From headers.
The proper approach conceals the fact that modifications have taken
place from the caller:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_…
--
Sent from mobile. Apologies for brevity and errors.
-----Original Message-----
From: Mojtaba <mespio(a)gmail.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Sent: Mon, 17 Sep 2018 5:23 AM
Subject: Re: [SR-Users] issue with rewrite to domain in failure route
The $td is read-only variable, and yoou could not change it's value.
If you want to change domain in To header, You should use testops
module in kamialio and replace domain in To header. for example:
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
With Regards.Mojtaba
On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
>
> Hi
> I'm building some system with failover trunk
> but my providers requires to set their doamin in domain part of To
Header
>
> so when I rewrite it at the my failure_route
>
> $td = FAILOVER_PROVIDER
> my To filed looks like
> To: <sip: 123(a)my.failover.providermy.main.provider>
> what i tried:
> Move this change to BRANCH_ROUTE:
> here tried as
> $td = as
> uac_replace_to('',"newToFieldValue)
>
> Move to the my custom route with both variants
> But result is the same
> kamailio 5.1
>
> version: kamailio 5.1.5 (x86_64/linux) d06080
> flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP,
PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES
> ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE
1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
> id: d06080
> compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
8:31 a.m.
all is default
Maybe I need to set up something there?
I jsut did not found anything about it at the docs
пн, 17 сент. 2018 г. в 14:42, Sergiu Pojoga <pojogas(a)gmail.com>om>:
Ok, what are your UAC parameters?
On Mon, Sep 17, 2018 at 7:34 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga <pojogas(a)gmail.com>om>:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
From which route are you calling
uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
I tried uac_replace_to()
But no luck
пн, 17 сент. 2018 г. в 12:28, Alex Balashov <abalashov(a)evaristesys.com
>:
> That is not a safe way to change the To header, since proxies aren't
> supposed to modify the To or From headers.
>
> The proper approach conceals the fact that modifications have taken
> place from the caller:
>
>
> https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_…
>
> --
> Sent from mobile. Apologies for brevity and errors.
>
> -----Original Message-----
> From: Mojtaba <mespio(a)gmail.com>
> To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org
> >
> Sent: Mon, 17 Sep 2018 5:23 AM
> Subject: Re: [SR-Users] issue with rewrite to domain in failure route
>
> The $td is read-only variable, and yoou could not change it's value.
> If you want to change domain in To header, You should use testops
> module in kamialio and replace domain in To header. for example:
>
> subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
> With Regards.Mojtaba
>
> On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
> wrote:
> >
> > Hi
> > I'm building some system with failover trunk
> > but my providers requires to set their doamin in domain part of To
> Header
> >
> > so when I rewrite it at the my failure_route
> >
> > $td = FAILOVER_PROVIDER
> > my To filed looks like
> > To: <sip: 123(a)my.failover.providermy.main.provider>
> > what i tried:
> > Move this change to BRANCH_ROUTE:
> > here tried as
> > $td = as
> > uac_replace_to('',"newToFieldValue)
> >
> > Move to the my custom route with both variants
> > But result is the same
> > kamailio 5.1
> >
> > version: kamailio 5.1.5 (x86_64/linux) d06080
> > flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
> USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP,
> PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
> FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
> USE_DST_BLACKLIST, HAVE_RESOLV_RES
> > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE
> 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
> > poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
> > id: d06080
> > compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
> > _______________________________________________
> > Kamailio (SER) - Users Mailing List
> > sr-users(a)lists.kamailio.org
> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> --
> --Mojtaba Esfandiari.S
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
8:56 a.m.
Hi,
I didn't understand from your mail if you are calling uac_replace_to() in
a branch route also for the first request or only when you hit the failure
route.
Just in case, you need to call it in a branch route for the initial request
too so to have a "clean" message when you run the failure route, otherwise
the effect will be the one you observed, kind of garbage in the header.
Best regards,
Federico
On Mon, Sep 17, 2018 at 2:32 PM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
all is default
Maybe I need to set up something there?
I jsut did not found anything about it at the docs
пн, 17 сент. 2018 г. в 14:42, Sergiu Pojoga <pojogas(a)gmail.com>om>:
Ok, what are your UAC parameters?
On Mon, Sep 17, 2018 at 7:34 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga <pojogas(a)gmail.com>om>:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
From which route are you calling
uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
> I tried uac_replace_to()
> But no luck
>
> пн, 17 сент. 2018 г. в 12:28, Alex Balashov <abalashov(a)evaristesys.com
> >:
>
>> That is not a safe way to change the To header, since proxies aren't
>> supposed to modify the To or From headers.
>>
>> The proper approach conceals the fact that modifications have taken
>> place from the caller:
>>
>>
>> https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_…
>>
>> --
>> Sent from mobile. Apologies for brevity and errors.
>>
>> -----Original Message-----
>> From: Mojtaba <mespio(a)gmail.com>
>> To: "Kamailio (SER) - Users Mailing List" <
>> sr-users(a)lists.kamailio.org>
>> Sent: Mon, 17 Sep 2018 5:23 AM
>> Subject: Re: [SR-Users] issue with rewrite to domain in failure route
>>
>> The $td is read-only variable, and yoou could not change it's value.
>> If you want to change domain in To header, You should use testops
>> module in kamialio and replace domain in To header. for example:
>>
>>
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
>> With Regards.Mojtaba
>>
>> On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <
>> ovoshlook(a)gmail.com> wrote:
>> >
>> > Hi
>> > I'm building some system with failover trunk
>> > but my providers requires to set their doamin in domain part of To
>> Header
>> >
>> > so when I rewrite it at the my failure_route
>> >
>> > $td = FAILOVER_PROVIDER
>> > my To filed looks like
>> > To: <sip: 123(a)my.failover.providermy.main.provider>
>> > what i tried:
>> > Move this change to BRANCH_ROUTE:
>> > here tried as
>> > $td = as
>> > uac_replace_to('',"newToFieldValue)
>> >
>> > Move to the my custom route with both variants
>> > But result is the same
>> > kamailio 5.1
>> >
>> > version: kamailio 5.1.5 (x86_64/linux) d06080
>> > flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
>> USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP,
>> PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
>> FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
>> USE_DST_BLACKLIST, HAVE_RESOLV_RES
>> > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE
>> 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
>> > poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
>> > id: d06080
>> > compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
>> > _______________________________________________
>> > Kamailio (SER) - Users Mailing List
>> > sr-users(a)lists.kamailio.org
>> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>>
>> --
>> --Mojtaba Esfandiari.S
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
9:07 a.m.
hmm
Suppose you are correct
Makes sence
Yes I using on ly in the branch for the failure
Thx for tip
пн, 17 сент. 2018 г. в 15:58, Federico Cabiddu <federico.cabiddu(a)gmail.com>om>:
Hi,
I didn't understand from your mail if you are calling uac_replace_to() in
a branch route also for the first request or only when you hit the failure
route.
Just in case, you need to call it in a branch route for the initial
request too so to have a "clean" message when you run the failure route,
otherwise the effect will be the one you observed, kind of garbage in the
header.
Best regards,
Federico
On Mon, Sep 17, 2018 at 2:32 PM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
all is default
Maybe I need to set up something there?
I jsut did not found anything about it at the docs
пн, 17 сент. 2018 г. в 14:42, Sergiu Pojoga <pojogas(a)gmail.com>om>:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Ok, what are your UAC parameters?
On Mon, Sep 17, 2018 at 7:34 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga <pojogas(a)gmail.com>om>:
> From which route are you calling uac_replace_to(), failure_route?
>
> "This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
>
> On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
> wrote:
>
>> I tried uac_replace_to()
>> But no luck
>>
>> пн, 17 сент. 2018 г. в 12:28, Alex Balashov <
>> abalashov(a)evaristesys.com>gt;:
>>
>>> That is not a safe way to change the To header, since proxies aren't
>>> supposed to modify the To or From headers.
>>>
>>> The proper approach conceals the fact that modifications have taken
>>> place from the caller:
>>>
>>>
>>>
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_…
>>>
>>> --
>>> Sent from mobile. Apologies for brevity and errors.
>>>
>>> -----Original Message-----
>>> From: Mojtaba <mespio(a)gmail.com>
>>> To: "Kamailio (SER) - Users Mailing List" <
>>> sr-users(a)lists.kamailio.org>
>>> Sent: Mon, 17 Sep 2018 5:23 AM
>>> Subject: Re: [SR-Users] issue with rewrite to domain in failure route
>>>
>>> The $td is read-only variable, and yoou could not change it's value.
>>> If you want to change domain in To header, You should use testops
>>> module in kamialio and replace domain in To header. for example:
>>>
>>>
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
>>> With Regards.Mojtaba
>>>
>>> On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <
>>> ovoshlook(a)gmail.com> wrote:
>>> >
>>> > Hi
>>> > I'm building some system with failover trunk
>>> > but my providers requires to set their doamin in domain part of To
>>> Header
>>> >
>>> > so when I rewrite it at the my failure_route
>>> >
>>> > $td = FAILOVER_PROVIDER
>>> > my To filed looks like
>>> > To: <sip: 123(a)my.failover.providermy.main.provider>
>>> > what i tried:
>>> > Move this change to BRANCH_ROUTE:
>>> > here tried as
>>> > $td = as
>>> > uac_replace_to('',"newToFieldValue)
>>> >
>>> > Move to the my custom route with both variants
>>> > But result is the same
>>> > kamailio 5.1
>>> >
>>> > version: kamailio 5.1.5 (x86_64/linux) d06080
>>> > flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
>>> USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP,
>>> PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
>>> FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
>>> USE_DST_BLACKLIST, HAVE_RESOLV_RES
>>> > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE
>>> 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
>>> > poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
>>> > id: d06080
>>> > compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
>>> > _______________________________________________
>>> > Kamailio (SER) - Users Mailing List
>>> > sr-users(a)lists.kamailio.org
>>> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>>
>>> --
>>> --Mojtaba Esfandiari.S
>>>
>>> _______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users(a)lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>> _______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users(a)lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
8:58 a.m.
Yes you have to configure a few things, most importantly:
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.p.restore_mode
https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.p.restore_dlg
You have two choices: either you set it to restore from RR or you treat
calls with dialog module.
On Mon, Sep 17, 2018 at 8:32 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
all is default
Maybe I need to set up something there?
I jsut did not found anything about it at the docs
пн, 17 сент. 2018 г. в 14:42, Sergiu Pojoga <pojogas(a)gmail.com>om>:
Ok, what are your UAC parameters?
On Mon, Sep 17, 2018 at 7:34 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
No. Tried from branch route.
пн, 17 сент. 2018 г., 14:25 Sergiu Pojoga <pojogas(a)gmail.com>om>:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
From which route are you calling
uac_replace_to(), failure_route?
"This function can be used from REQUEST_ROUTE and from BRANCH_ROUTE"
On Mon, Sep 17, 2018 at 6:05 AM Yuriy Gorlichenko <ovoshlook(a)gmail.com>
wrote:
> I tried uac_replace_to()
> But no luck
>
> пн, 17 сент. 2018 г. в 12:28, Alex Balashov <abalashov(a)evaristesys.com
> >:
>
>> That is not a safe way to change the To header, since proxies aren't
>> supposed to modify the To or From headers.
>>
>> The proper approach conceals the fact that modifications have taken
>> place from the caller:
>>
>>
>> https://kamailio.org/docs/modules/5.1.x/modules/uac.html#uac.f.uac_replace_…
>>
>> --
>> Sent from mobile. Apologies for brevity and errors.
>>
>> -----Original Message-----
>> From: Mojtaba <mespio(a)gmail.com>
>> To: "Kamailio (SER) - Users Mailing List" <
>> sr-users(a)lists.kamailio.org>
>> Sent: Mon, 17 Sep 2018 5:23 AM
>> Subject: Re: [SR-Users] issue with rewrite to domain in failure route
>>
>> The $td is read-only variable, and yoou could not change it's value.
>> If you want to change domain in To header, You should use testops
>> module in kamialio and replace domain in To header. for example:
>>
>>
subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1$avp(sip_address)\2/ig')
>> With Regards.Mojtaba
>>
>> On Mon, Sep 17, 2018 at 1:19 PM Yuriy Gorlichenko <
>> ovoshlook(a)gmail.com> wrote:
>> >
>> > Hi
>> > I'm building some system with failover trunk
>> > but my providers requires to set their doamin in domain part of To
>> Header
>> >
>> > so when I rewrite it at the my failure_route
>> >
>> > $td = FAILOVER_PROVIDER
>> > my To filed looks like
>> > To: <sip: 123(a)my.failover.providermy.main.provider>
>> > what i tried:
>> > Move this change to BRANCH_ROUTE:
>> > here tried as
>> > $td = as
>> > uac_replace_to('',"newToFieldValue)
>> >
>> > Move to the my custom route with both variants
>> > But result is the same
>> > kamailio 5.1
>> >
>> > version: kamailio 5.1.5 (x86_64/linux) d06080
>> > flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
>> USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP,
>> PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
>> FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
>> USE_DST_BLACKLIST, HAVE_RESOLV_RES
>> > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE
>> 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
>> > poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
>> > id: d06080
>> > compiled on 00:43:08 Aug 23 2018 with gcc 6.3.0
>> > _______________________________________________
>> > Kamailio (SER) - Users Mailing List
>> > sr-users(a)lists.kamailio.org
>> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>>
>> --
>> --Mojtaba Esfandiari.S
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2346
days inactive
2346
days old
11 comments
5 participants
participants (5)
-
Alex Balashov -
Federico Cabiddu -
Mojtaba -
Sergiu Pojoga -
Yuriy Gorlichenko