Dears,
I'm trying drouting module in kamailio , it's working good when first gateway in the list is up , yet when first gateway is unrecheable , it's not rerouted to second destination, meaning that fail over is not working.
Kindly find attached wireshark trace I'm getting .
Below is db entries I'm using :
dr_gateways:
Dr_gw_lists
Dr_groups:
Dr_rules:
Below is routing block I'm using :
request_route{
if (is_method("INVITE"))
{
if (!do_routing("0")) {
send_reply("503", "Test No Rules matching the URI");
exit;
}
route(10);
exit;
}
}
route[10] {
if (!do_routing("0")) {
xlog("do_routing: No rules matching the URI\n");
send_reply("503","No rules matching the URI");
exit;
}
if (is_method("INVITE")) {
t_on_failure("4");
}
route(1);
}
failure_route[4] {
xlog("DEBUG: DROUTING failure route active\n");
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
if (use_next_gw()) {
t_relay();
exit;
} else {
t_reply ("503", "Service not available");
exit;
}
}
route[1] {
# send it out now; use stateful forwarding as it works
# reliably even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
exit;
}
Appreciating your prompt reply and assistance.
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:\Users\Mar ie\Documents\My%20Received%20Files Vanrise Building, Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
Hello,
what are the parameters for drouting module?
Cheers, Daniel
On 26/05/15 11:14, Ali Taher wrote:
Hello,
Below are parameters used for drouting module :
modparam("drouting", "db_url","mysql://kamailio:ali@localhost/kamailio")
modparam("drouting", "drd_table", "dr_gateways")
modparam("drouting", "drr_table", "dr_rules")
modparam("drouting", "drg_table", "dr_groups")
modparam("drouting", "drl_table", "dr_gw_lists")
modparam("drouting", "sort_order", 0)
regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:\Users\Mar ie\Documents\My%20Received%20Files Vanrise Building, Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Daniel-Constantin Mierla Sent: Tuesday, May 26, 2015 12:57 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
Hello,
what are the parameters for drouting module?
Cheers, Daniel
On 26/05/15 11:14, Ali Taher wrote:
Dears,
I'm trying drouting module in kamailio , it's working good when first gateway in the list is up , yet when first gateway is unrecheable , it's not rerouted to second destination, meaning that fail over is not working.
Kindly find attached wireshark trace I'm getting .
Below is db entries I'm using :
dr_gateways:
Dr_gw_lists
Dr_groups:
Dr_rules:
Below is routing block I'm using :
request_route{
if (is_method("INVITE"))
{
if (!do_routing("0")) {
send_reply("503", "Test No Rules matching the URI");
exit;
}
route(10);
exit;
}
}
route[10] {
if (!do_routing("0")) {
xlog("do_routing: No rules matching the URI\n");
send_reply("503","No rules matching the URI");
exit;
}
if (is_method("INVITE")) {
t_on_failure("4");
}
route(1);
}
failure_route[4] {
xlog("DEBUG: DROUTING failure route active\n");
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
if (use_next_gw()) {
t_relay();
exit;
} else {
t_reply ("503", "Service not available");
exit;
}
}
route[1] {
# send it out now; use stateful forwarding as it works
# reliably even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
exit;
}
Appreciating your prompt reply and assistance.
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5 CMarie%5CDocuments%5CMy%20Received%20Files Vanrise Building, Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org mailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
iirc, you have to set some parameter that is related to AVP storing the addresses for re-routing. Look at the readme of the module, see the parameters that have avp in name or something similar.
Cheers, Daniel
On 26/05/15 12:27, Ali Taher wrote:
Hello,
I added below parameters but still didn't rerouted to second destination :(
modparam("drouting", "ruri_avp", '$avp(dr_ruri)')
modparam("drouting", "attrs_avp", '$avp(dr_attrs)')
regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:\Users\Mar ie\Documents\My%20Received%20Files Vanrise Building, Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: Daniel-Constantin Mierla [mailto:miconda@gmail.com] Sent: Tuesday, May 26, 2015 1:44 PM To: Ali Taher; 'Kamailio (SER) - Users Mailing List' Subject: Re: [SR-Users] Kamailio drouting failure not working
Hello,
iirc, you have to set some parameter that is related to AVP storing the addresses for re-routing. Look at the readme of the module, see the parameters that have avp in name or something similar.
Cheers, Daniel
On 26/05/15 12:27, Ali Taher wrote:
Hello,
Below are parameters used for drouting module :
modparam("drouting", "db_url","mysql://kamailio:ali@localhost/kamailio")
modparam("drouting", "drd_table", "dr_gateways")
modparam("drouting", "drr_table", "dr_rules")
modparam("drouting", "drg_table", "dr_groups")
modparam("drouting", "drl_table", "dr_gw_lists")
modparam("drouting", "sort_order", 0)
regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5 CMarie%5CDocuments%5CMy%20Received%20Files Vanrise Building, Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Daniel-Constantin Mierla Sent: Tuesday, May 26, 2015 12:57 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
Hello,
what are the parameters for drouting module?
Cheers, Daniel
On 26/05/15 11:14, Ali Taher wrote:
Dears,
I'm trying drouting module in kamailio , it's working good when first gateway in the list is up , yet when first gateway is unrecheable , it's not rerouted to second destination, meaning that fail over is not working.
Kindly find attached wireshark trace I'm getting .
Below is db entries I'm using :
dr_gateways:
Dr_gw_lists
Dr_groups:
Dr_rules:
Below is routing block I'm using :
request_route{
if (is_method("INVITE"))
{
if (!do_routing("0")) {
send_reply("503", "Test No Rules matching the URI");
exit;
}
route(10);
exit;
}
}
route[10] {
if (!do_routing("0")) {
xlog("do_routing: No rules matching the URI\n");
send_reply("503","No rules matching the URI");
exit;
}
if (is_method("INVITE")) {
t_on_failure("4");
}
route(1);
}
failure_route[4] {
xlog("DEBUG: DROUTING failure route active\n");
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
if (use_next_gw()) {
t_relay();
exit;
} else {
t_reply ("503", "Service not available");
exit;
}
}
route[1] {
# send it out now; use stateful forwarding as it works
# reliably even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
exit;
}
Appreciating your prompt reply and assistance.
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5 CMarie%5CDocuments%5CMy%20Received%20Files Vanrise Building, Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org mailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
request timeout == 408 error, so "if (use_next_gw()) {" never called
Hi,
Thanks for your reply , it’s working fine now.
Yet, when a call is rerouted to a gateway which cancel it (by clicking on ignore button), call is then rerouted to next gateway which is not correct.
I tried to add this condition : If(t_check_status(“486”)) { exit;} in failure_route function to exit when cancel occur , but didn’t work :(.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:\Users\Marie\Documents\My%20Received%20Files Vanrise Building, Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 3:40 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
request timeout == 408 error, so "if (use_next_gw()) {" never called
486 is a busy error; you may use in faulure_route : if ( t_is_canceled() ){ exit; }
2015-05-26 17:09 GMT+03:00 Ali Taher ataher@vanrise.com:
Hi,
Thanks for your fast reply.
I tried below condition in failure_route but still rerouted to next destination when clicking on ignore.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:\Users\Marie\Documents\My%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:18 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
486 is a busy error;
you may use in faulure_route :
if ( t_is_canceled() ){
exit;
}
2015-05-26 17:09 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your reply , it’s working fine now.
Yet, when a call is rerouted to a gateway which cancel it (by clicking on ignore button), call is then rerouted to next gateway which is not correct.
I tried to add this condition : If(t_check_status(“486”)) { exit;} in failure_route function to exit when cancel occur , but didn’t work :(.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 3:40 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
request timeout == 408 error, so "if (use_next_gw()) {" never called
show failure_route content and response from phone (while clicking on ignore)
2015-05-26 17:33 GMT+03:00 Ali Taher ataher@vanrise.com:
Hi,
Below is failure_route content:
failure_route[1] {
if(t_is_canceled())
{
exit;
}
if (use_next_gw()) {
t_relay();
exit;
}
else {
t_reply ("503", "Service not available");
exit;
}
}
Noting that phone is showing : “Service not available” meaning that all destinations in avp list were tried.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:\Users\Marie\Documents\My%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:42 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
show failure_route content and response from phone (while clicking on ignore)
2015-05-26 17:33 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your fast reply.
I tried below condition in failure_route but still rerouted to next destination when clicking on ignore.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:18 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
486 is a busy error;
you may use in faulure_route :
if ( t_is_canceled() ){
exit;
}
2015-05-26 17:09 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your reply , it’s working fine now.
Yet, when a call is rerouted to a gateway which cancel it (by clicking on ignore button), call is then rerouted to next gateway which is not correct.
I tried to add this condition : If(t_check_status(“486”)) { exit;} in failure_route function to exit when cancel occur , but didn’t work :(.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 3:40 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
request timeout == 408 error, so "if (use_next_gw()) {" never called
Sorry, I did not read the question carefully. Really 486 usually send by phone, when clicking ignore so this statement before "use_next_gw()" usually works: if (t_check_status("486")){ exit; }
but may be your phone generate smth else (not 486). i use smth like this before use_next_gw() : if ( t_is_canceled() ){ exit; }
if (t_check_status("....")){ #no backup code list regex exit; }
you may add log string at start of failure_route to determine error code: xlog("L_INFO", "failure_route; code: $T_reply_code");
PS include "loadmodule 'tmx.so'" for $T_reply_code
2015-05-26 17:46 GMT+03:00 Ali Taher ataher@vanrise.com:
Hi,
In wireshark, I’m getting Status: 486 Busy Here | , when cancel button is clicked.
Isnt’ that meaning that the reply code is 486?
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:\Users\Marie\Documents\My%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 6:20 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
Sorry, I did not read the question carefully.
Really 486 usually send by phone, when clicking ignore
so this statement before "use_next_gw()" usually works:
if (t_check_status("486")){
exit;
}
but may be your phone generate smth else (not 486).
i use smth like this before use_next_gw() :
if ( t_is_canceled() ){
exit;
}
if (t_check_status("....")){ #no backup code list regex
exit;
}
you may add log string at start of failure_route to determine error code:
xlog("L_INFO", "failure_route; code: $T_reply_code");
PS include "loadmodule 'tmx.so'" for $T_reply_code
2015-05-26 17:46 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Below is failure_route content:
failure_route[1] {
if(t_is_canceled())
{
exit;
}
if (use_next_gw()) {
t_relay();
exit;
}
else {
t_reply ("503", "Service not available");
exit;
}
}
Noting that phone is showing : “Service not available” meaning that all destinations in avp list were tried.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:42 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
show failure_route content and response from phone (while clicking on ignore)
2015-05-26 17:33 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your fast reply.
I tried below condition in failure_route but still rerouted to next destination when clicking on ignore.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:18 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
486 is a busy error;
you may use in faulure_route :
if ( t_is_canceled() ){
exit;
}
2015-05-26 17:09 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your reply , it’s working fine now.
Yet, when a call is rerouted to a gateway which cancel it (by clicking on ignore button), call is then rerouted to next gateway which is not correct.
I tried to add this condition : If(t_check_status(“486”)) { exit;} in failure_route function to exit when cancel occur , but didn’t work :(.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 3:40 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
request timeout == 408 error, so "if (use_next_gw()) {" never called
Hello,
maybe is better to try first without filtering on reply code inside failure route apart of canceled transaction. Once you get that going, then you can start putting rules on reply codes.
Cheers, Daniel
On 26/05/15 17:55, Ali Taher wrote:
Hi,
In wireshark, I’m getting Status: 486 Busy Here | , when cancel button is clicked.
Isnt’ that meaning that the reply code is 486?
Regards,
Ali
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 6:20 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
Sorry, I did not read the question carefully.
Really 486 usually send by phone, when clicking ignore
so this statement before "use_next_gw()" usually works:
if (t_check_status("486")){
exit;
}
but may be your phone generate smth else (not 486).
i use smth like this before use_next_gw() :
if ( t_is_canceled() ){
exit;
}
if (t_check_status("....")){ #no backup code list regex
exit;
}
you may add log string at start of failure_route to determine error code:
xlog("L_INFO", "failure_route; code: $T_reply_code");
PS include "loadmodule 'tmx.so'" for $T_reply_code
2015-05-26 17:46 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Below is failure_route content:
failure_route[1] {
if(t_is_canceled())
{
exit;
}
if (use_next_gw()) {
t_relay();
exit;
}
else {
t_reply ("503", "Service not available");
exit;
}
}
Noting that phone is showing : “Service not available” meaning that all destinations in avp list were tried.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:42 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
show failure_route content and response from phone (while clicking on ignore)
2015-05-26 17:33 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your fast reply.
I tried below condition in failure_route but still rerouted to next destination when clicking on ignore.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:18 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
486 is a busy error;
you may use in faulure_route :
if ( t_is_canceled() ){
exit;
}
2015-05-26 17:09 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your reply , it’s working fine now.
Yet, when a call is rerouted to a gateway which cancel it (by clicking on ignore button), call is then rerouted to next gateway which is not correct.
I tried to add this condition : If(t_check_status(“486”)) { exit;} in failure_route function to exit when cancel occur , but didn’t work :(.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 3:40 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
request timeout == 408 error, so "if (use_next_gw()) {" never called
yes, status code 486 in sip flow has to match 486 transaction status in script
2015-05-26 19:21 GMT+03:00 Ali Taher ataher@vanrise.com:
Hello,
On 26/05/15 19:02, Ali Taher wrote:
what you do above is not to re-route in case the reply code is 486.
If you want to re-route only in case of 486, negate that condition.
Cheers, Daniel
Hi,
Actually now when clicking Cancel button it's rerouting to next gateway , I just want to stop that and end the call at this level , that's why I'm trying to filter on code 486 and exit when this condition is met.
But it's not working :(
Any help please.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:\Users\Mar ie\Documents\My%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Daniel-Constantin Mierla Sent: Wednesday, May 27, 2015 9:24 AM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
Hello,
On 26/05/15 19:02, Ali Taher wrote:
Hi
As mentioned before, i tried
if (t_check_status("486")){
exit;
}
in failure_route but didnt work.
what you do above is not to re-route in case the reply code is 486.
If you want to re-route only in case of 486, negate that condition.
Cheers, Daniel
Regards,
Ali
Sent from my iPhone
On May 26, 2015, at 7:45 PM, Dmitri Savolainen <savolainen@erinaco.ru mailto:savolainen@erinaco.ru > wrote:
yes, status code 486 in sip flow has to match 486 transaction status in script
2015-05-26 19:21 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
In wireshark, I'm getting Status: 486 Busy Here | , when cancel button is clicked.
Isnt' that meaning that the reply code is 486?
Regards,
Ali
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 6:20 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
Sorry, I did not read the question carefully.
Really 486 usually send by phone, when clicking ignore
so this statement before "use_next_gw()" usually works:
if (t_check_status("486")){
exit;
}
but may be your phone generate smth else (not 486).
i use smth like this before use_next_gw() :
if ( t_is_canceled() ){
exit;
}
if (t_check_status("....")){ #no backup code list regex
exit;
}
you may add log string at start of failure_route to determine error code:
xlog("L_INFO", "failure_route; code: $T_reply_code");
PS include "loadmodule 'tmx.so'" for $T_reply_code
2015-05-26 17:46 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Below is failure_route content:
failure_route[1] {
if(t_is_canceled())
{
exit;
}
if (use_next_gw()) {
t_relay();
exit;
}
else {
t_reply ("503", "Service not available");
exit;
}
}
Noting that phone is showing : "Service not available" meaning that all destinations in avp list were tried.
Regards,
<image001.png>
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5 CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
<image002.png>
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 <image003.png> http://www.linkedin.com/company/vanrise-solutions <image004.png> http://twitter.com/VanriseSolution <image005.png>
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:42 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
show failure_route content and response from phone (while clicking on ignore)
2015-05-26 17:33 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your fast reply.
I tried below condition in failure_route but still rerouted to next destination when clicking on ignore.
Appreciate your help.
Regards,
<image001.png>
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5 CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
<image002.png>
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 <image003.png> http://www.linkedin.com/company/vanrise-solutions <image004.png> http://twitter.com/VanriseSolution <image005.png>
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:18 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
486 is a busy error;
you may use in faulure_route :
if ( t_is_canceled() ){
exit;
}
2015-05-26 17:09 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your reply , it's working fine now.
Yet, when a call is rerouted to a gateway which cancel it (by clicking on ignore button), call is then rerouted to next gateway which is not correct.
I tried to add this condition : If(t_check_status("486")) { exit;} in failure_route function to exit when cancel occur , but didn't work :(.
Appreciate your help.
Regards,
<image001.png>
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5 CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
<image002.png>
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 <image003.png> http://www.linkedin.com/company/vanrise-solutions <image004.png> http://twitter.com/VanriseSolution <image005.png>
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 3:40 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
request timeout == 408 error, so "if (use_next_gw()) {" never called
Hi,
Actually now when clicking Cancel button it's rerouting to next gateway , I just want to stop that and end the call at this level , that's why I'm trying to filter on code 486 and exit when this condition is met.
But it's not working :(
Any help please.
Regards,
Ali
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Daniel-Constantin Mierla Sent: Wednesday, May 27, 2015 9:24 AM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
Hello,
On 26/05/15 19:02, Ali Taher wrote:
Hi
As mentioned before, i tried
if (t_check_status("486")){
exit;
}
in failure_route but didnt work.
what you do above is not to re-route in case the reply code is 486.
If you want to re-route only in case of 486, negate that condition.
Cheers, Daniel
Regards,
Ali
Sent from my iPhone
On May 26, 2015, at 7:45 PM, Dmitri Savolainen <savolainen@erinaco.ru mailto:savolainen@erinaco.ru > wrote:
yes, status code 486 in sip flow has to match 486 transaction status in script
2015-05-26 19:21 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
In wireshark, I'm getting Status: 486 Busy Here | , when cancel button is clicked.
Isnt' that meaning that the reply code is 486?
Regards,
Ali
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 6:20 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
Sorry, I did not read the question carefully.
Really 486 usually send by phone, when clicking ignore
so this statement before "use_next_gw()" usually works:
if (t_check_status("486")){
exit;
}
but may be your phone generate smth else (not 486).
i use smth like this before use_next_gw() :
if ( t_is_canceled() ){
exit;
}
if (t_check_status("....")){ #no backup code list regex
exit;
}
you may add log string at start of failure_route to determine error code:
xlog("L_INFO", "failure_route; code: $T_reply_code");
PS include "loadmodule 'tmx.so'" for $T_reply_code
2015-05-26 17:46 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Below is failure_route content:
failure_route[1] {
if(t_is_canceled())
{
exit;
}
if (use_next_gw()) {
t_relay();
exit;
}
else {
t_reply ("503", "Service not available");
exit;
}
}
Noting that phone is showing : "Service not available" meaning that all destinations in avp list were tried.
Regards,
<image001.png>
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5 CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
<image002.png>
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 <image003.png> http://www.linkedin.com/company/vanrise-solutions <image004.png> http://twitter.com/VanriseSolution <image005.png>
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:42 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
show failure_route content and response from phone (while clicking on ignore)
2015-05-26 17:33 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your fast reply.
I tried below condition in failure_route but still rerouted to next destination when clicking on ignore.
Appreciate your help.
Regards,
<image001.png>
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5 CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
<image002.png>
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 <image003.png> http://www.linkedin.com/company/vanrise-solutions <image004.png> http://twitter.com/VanriseSolution <image005.png>
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:18 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
486 is a busy error;
you may use in faulure_route :
if ( t_is_canceled() ){
exit;
}
2015-05-26 17:09 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your reply , it's working fine now.
Yet, when a call is rerouted to a gateway which cancel it (by clicking on ignore button), call is then rerouted to next gateway which is not correct.
I tried to add this condition : If(t_check_status("486")) { exit;} in failure_route function to exit when cancel occur , but didn't work :(.
Appreciate your help.
Regards,
<image001.png>
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d6 12c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5 CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway - Beirut, Lebanon
<image002.png>
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 <image003.png> http://www.linkedin.com/company/vanrise-solutions <image004.png> http://twitter.com/VanriseSolution <image005.png>
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 3:40 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
request timeout == 408 error, so "if (use_next_gw()) {" never called
Hello,
a cancelled transaction can be detecte with t_is_canceled() in failure_route or filtering on 487.
Cheers, Daniel
On 27/05/15 08:43, Ali Taher wrote:
Hi
Can you please inform me in what location is the output of xlog ?
Regards,
Ali
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 6:20 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
Sorry, I did not read the question carefully.
Really 486 usually send by phone, when clicking ignore
so this statement before "use_next_gw()" usually works:
if (t_check_status("486")){
exit;
}
but may be your phone generate smth else (not 486).
i use smth like this before use_next_gw() :
if ( t_is_canceled() ){
exit;
}
if (t_check_status("....")){ #no backup code list regex
exit;
}
you may add log string at start of failure_route to determine error code:
xlog("L_INFO", "failure_route; code: $T_reply_code");
PS include "loadmodule 'tmx.so'" for $T_reply_code
2015-05-26 17:46 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Below is failure_route content:
failure_route[1] {
if(t_is_canceled())
{
exit;
}
if (use_next_gw()) {
t_relay();
exit;
}
else {
t_reply ("503", "Service not available");
exit;
}
}
Noting that phone is showing : “Service not available” meaning that all destinations in avp list were tried.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:42 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
show failure_route content and response from phone (while clicking on ignore)
2015-05-26 17:33 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your fast reply.
I tried below condition in failure_route but still rerouted to next destination when clicking on ignore.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 5:18 PM
To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
486 is a busy error;
you may use in faulure_route :
if ( t_is_canceled() ){
exit;
}
2015-05-26 17:09 GMT+03:00 Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com >:
Hi,
Thanks for your reply , it’s working fine now.
Yet, when a call is rerouted to a gateway which cancel it (by clicking on ignore button), call is then rerouted to next gateway which is not correct.
I tried to add this condition : If(t_check_status(“486”)) { exit;} in failure_route function to exit when cancel occur , but didn’t work :(.
Appreciate your help.
Regards,
Ali Taher
Technical Support Engineer
T&F
M
W
A
+961-5-457437 Ext 215
+961-70-010600
http://www.vanrise.com/ http://www.vanrise.com
Vanrise Building https://maps.google.com/maps/ms?msa=0&msid=208243362929850217065.0004cbc8d612c5f9b4237&ie=UTF8&t=h&vpsrc=0&z=19&iwloc=0004cbc8e4652b4edf71cC:%5CUsers%5CMarie%5CDocuments%5CMy%20Received%20Files , Facing Galerie Semaan
Hazmiyeh Highway – Beirut, Lebanon
Join us at
http://www.facebook.com/pages/Vanrise-Solutions-Offshore/128309743915533 http://www.linkedin.com/company/vanrise-solutions http://twitter.com/VanriseSolution
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org mailto:sr-users-bounces@lists.sip-router.org ] On Behalf Of Dmitri Savolainen Sent: Tuesday, May 26, 2015 3:40 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Kamailio drouting failure not working
if (t_check_status("[34][0-9][0-9]")) {
exit;
}
request timeout == 408 error, so "if (use_next_gw()) {" never called
Hello,
in your syslog file (typically /var/run/syslog or /var/run/messages).
Cheers, Daniel
On 27/05/15 08:46, Ali Taher wrote:
-
Ali Taher -
Daniel-Constantin Mierla -
Dmitri Savolainen