OK, I think this conversation must have been confused by geographic barriers. In north America, when you call someone your phone number shows up on their phone. The Caller-ID or ANI. Strangely, the username of the from address is showing up in my caller-id window.... if the username is 256@test.com, 256 shows up as the caller-id. If the username is test@test.com, 4534 shows up as the caller-id. I want it to show up as 1XXXXXXXXXX.
Maybe there is a telephony guru on the list that is more familiar with the north American conventions that can help me to explain it better.
This field is mandatory for voice services here to identify the caller to emergency services.
Subject: Re: [Serusers] caller-id with raius using sip-rpid
What is caller-id ? Is is a header field or what ? Example, please....
Jan.
On 03-10 16:21, Steve Dolloff wrote:
I want caller-id to work for a subscriber who has a non-numeric username.
Subject: Re: [Serusers] caller-id with raius using sip-rpid
There is a Remote-Party-ID header in your message. What else do you want ? Please be more specific and provide some examples, your terminology is hard to follow for me, sorry.
Jan.
On 03-10 16:05, Steve Dolloff wrote:
Calling from one ata to another, proxied and registered through ser, here is my ngrep port 5060 output. Remote-party-id is being set but
not
the call-id.
U 219.242.10.153:5060 -> 226.145.234.80:5060 INVITE sip:256@226.145.234.80:5060;user=phone;transport=udp SIP/2.0..Max-Fo rwards: 10..Record-Route: sip:256@219.242.10.153;ftag=2441840520;lr=on..V ia: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c3976.0..Via: SIP/2.0/ UDP 226.145.234.113:5060;rport=5060..From: sip:test@voip2.test.net;tag=24418 40520..To: sip:256@voip2.test.net;user=phone..Call-ID: 2303820380@226.145. 234.113..CSeq: 2 INVITE..Contact: <sip:test@226.145.234.113:5060;transport= udp>..User-Agent: Cisco ATA 186 v2.16.2 ata18x (030909a)..Authorization: D igest
username="test",realm="voip2.test.net",nonce="3f7de542de99d4e832372e6b
812a73562d346e6f",uri="sip:256@voip2.test.net",response="1a4552ce6c65333
439b 6a97672f415a5"..Expires: 300..Content-Length: 271..Content-Type: applicatio n/sdp..Remote-Party-ID: 222;party=calling;id-type=subscriber;screen=no....v =0..o=test 5648 5648 IN IP4 226.145.234.113..s=ATA186 Call..c=IN
IP4
226.14 5.234.113..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0 PCMU/8000/1.. a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101 telephone-even t/8000..a=fmtp:101 0-15..a=direction:active.. # U 226.145.234.80:5060 -> 219.242.10.153:5060 SIP/2.0 100 Trying..Via: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c 3976.0..Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060..From: sip:test@vo ip2.test.net;tag=2441840520..To: sip:256@voip2.test.net;user=phone;tag=2077 559661..Call-ID: 2303820380@226.145.234.113..CSeq: 2
INVITE..Server:
Cisco ATA 186 v2.16.2 ata18x (030909a)..Content-Length: 0....
Subject: Re: [Serusers] caller-id with raius using sip-rpid
Is there any Remote-Party-ID header field in outgoing INVITE ? If so then your gateway/whatever ignores it.
Jan.
On 02-10 15:18, Steve Dolloff wrote:
Any phone that supports caller-id. But I haven't gotten to work.
I'm
seeing the username instead.
Subject: RE: [Serusers] caller-id with raius using sip-rpid
Which phone device should I use to see caller ID information when using the ATA186?
Alejandro
--- Steve Dolloff sdolloff@noc.test.net escreveu: > At the top of the config I have the following
statement....
if (method=="INVITE") { record_route(); if (!radius_www_authorize("")) { log(1,"radius authfailure");
www_challenge("voip2.test.net","0"); break; }; append_rpid_hf(); };
If I call a phone with caller-id and my username is 256, it shows 256 on the phone, if I call with a username of test, it shows 4534 on the handset even though I have the sip-rpid set to 222.
Stephen
Subject: Re: [Serusers] caller-id with raius using sip-rpid
Retrieving caller-id when users register doesn't work because REGISTER messages are processed by the server and the server generates a reply only.
What you need is to insert Remote-Party-ID header field into INVITE message, to make it work you must authenticate also INVITE messages. My guess is that you do not authenticate INVITE messages and therefore there is nothing append_rpid_hf can add.
Jan.
On 02-10 11:35, Steve Dolloff wrote:
I want to retrieve the caller-id of a user from
radius when they
register and use it when I redirect an invite
request to the voicemail
system so that the voicemail system can route the
call based on
caller-id. I also want to be able to send it to
the sip gateway when I
am routing calls to the pstn.
I have this in my config currently and it doesn't
appear to set the
caller-id in the invite message.
rewritehostport("219.242.10.153:5061");
append_rpid_hf(); t_relay();Subject: Re: [Serusers] caller-id with raius using
sip-rpid
append_rpid_hf has no parameters. Version with 2
parameters is in
unstable branch in the CVS only. What exactly do
you want to do ?
Jan.
On 02-10 11:26, Steve Dolloff wrote:
I found this example in a previous Serusers
message.
append_rpid_hf("<sip:+",
"@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes");
I tried calling append_rpid_hf();, but it does
nothing.
I also tried
append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes"
); but I get an unknown command presumably
because I am not using the
right number of parameters.
I only want to modify the calling-id info.
Can anyone provide an example?
-----Original Message----- From: Jan Janak [mailto:jan@iptel.org] Sent: Thursday, October 02, 2003 11:09 AM To: Steve Dolloff Cc: serusers@lists.iptel.org Subject: Re: [Serusers] caller-id with raius
using sip-rpid
If you want to add Remote-Party-ID header field
then you have to call
append_rpid_hf function in your script.
Jan.
On 02-10 11:07, Steve Dolloff wrote: > OK, I am setting up a Voicemail system (using
asterisk) and I am
> currently doing a rewritehostport(ip:port) and
then trelay() to send
it > to the voicemail system if an invite fails. > > Should I change something? See my ser.cfg and
output from the call
to
> the vm. > > Here is the code from ser.cfg > > rewritehostport("219.242.10.153:5061"); > t_relay(); > > Here is the sip info from asterisk. > > INVITE sip:200@219.242.10.153:5061;user=phone
SIP/2.0
> Max-Forwards: 10 > Record-Route:
sip:200@219.242.10.153;ftag=2236658534;lr=on
> Via: SIP/2.0/UDP
219.242.10.153;branch=z9hG4bK13de.31901234.0
> Via: SIP/2.0/UDP
226.145.234.113:5060;rport=5060
> From: sip:test@voip2.test.net;tag=2236658534 > To: sip:200@voip2.test.net;user=phone > Call-ID: 2218108971@226.145.234.113 > CSeq: 1 INVITE > Contact:
sip:test@226.145.234.113:5060;transport=udp
> User-Agent: Cisco ATA 186 v2.16.2 ata18x
(030909a)
> Expires: 300 > Content-Length: 271 > Content-Type: application/sdp > > > > Subject: Re: [Serusers] caller-id with raius
using sip-rpid
> > Remote-Party-ID header field is inserted into
forwarded requests,
not
> responses. > > Jan. > > On 02-10 10:53, Steve Dolloff wrote: > > Ser doesn't appear to be passing the
Caller-id to the ata at auth
or
I > > am doing something wrong. Can anyone point
me in the right
direction? > > > > Thanks, > > > > Stephen > > > > I have the following entry in my freeradius
users file.
> > > > test@voip2.test.net Auth-Type := Digest,
User-Password == "test"
> > Reply-Message = "Hello, test with
digest", Sip-Rpid =
> > "8472222222" > > > > When I run a radclient test I get the
correct info..
> > > > radclient -f digest.test 219.242.10.153:1812
auth testing
> > Received response ID 134, code 2, length =
57
=== message truncated ===
Yahoo! Mail - o melhor webmail do Brasil http://mail.yahoo.com.br
I see now, you mean Caller ID from the PSTN word.
What you want is possible only if: a) The phone supports Remote-Party-ID (I doubt ATA does) b) You use numeric username in From
Currently there is no other way around since it is not possible to change the From header field.
Since ATA probably doesn't support Remote-Party-ID (otherwise it would display 222 in your case), you have bad luck, I would say. The only thing you can do is using numeric usernames.
OT: Please express yourself clearly next time, look how many iterations we needed to get to this simple reply. Realize that you are not the only one on the mailing list and try to explain things as thoroughly as possible. Simply writing "I want call-id" really doesn't help.
We try to reply as many questions as possible so please try to make it easier for us.
Jan.
On 03-10 16:37, Steve Dolloff wrote:
OK, I think this conversation must have been confused by geographic barriers. In north America, when you call someone your phone number shows up on their phone. The Caller-ID or ANI. Strangely, the username of the from address is showing up in my caller-id window.... if the username is 256@test.com, 256 shows up as the caller-id. If the username is test@test.com, 4534 shows up as the caller-id. I want it to show up as 1XXXXXXXXXX.
Maybe there is a telephony guru on the list that is more familiar with the north American conventions that can help me to explain it better.
This field is mandatory for voice services here to identify the caller to emergency services.
Subject: Re: [Serusers] caller-id with raius using sip-rpid
What is caller-id ? Is is a header field or what ? Example, please....
Jan.
On 03-10 16:21, Steve Dolloff wrote:
I want caller-id to work for a subscriber who has a non-numeric username.
Subject: Re: [Serusers] caller-id with raius using sip-rpid
There is a Remote-Party-ID header in your message. What else do you want ? Please be more specific and provide some examples, your terminology is hard to follow for me, sorry.
Jan.
On 03-10 16:05, Steve Dolloff wrote:
Calling from one ata to another, proxied and registered through ser, here is my ngrep port 5060 output. Remote-party-id is being set but
not
the call-id.
U 219.242.10.153:5060 -> 226.145.234.80:5060 INVITE sip:256@226.145.234.80:5060;user=phone;transport=udp SIP/2.0..Max-Fo rwards: 10..Record-Route: sip:256@219.242.10.153;ftag=2441840520;lr=on..V ia: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c3976.0..Via: SIP/2.0/ UDP 226.145.234.113:5060;rport=5060..From: sip:test@voip2.test.net;tag=24418 40520..To: sip:256@voip2.test.net;user=phone..Call-ID: 2303820380@226.145. 234.113..CSeq: 2 INVITE..Contact: <sip:test@226.145.234.113:5060;transport= udp>..User-Agent: Cisco ATA 186 v2.16.2 ata18x (030909a)..Authorization: D igest
username="test",realm="voip2.test.net",nonce="3f7de542de99d4e832372e6b
812a73562d346e6f",uri="sip:256@voip2.test.net",response="1a4552ce6c65333
439b 6a97672f415a5"..Expires: 300..Content-Length: 271..Content-Type: applicatio n/sdp..Remote-Party-ID: 222;party=calling;id-type=subscriber;screen=no....v =0..o=test 5648 5648 IN IP4 226.145.234.113..s=ATA186 Call..c=IN
IP4
226.14 5.234.113..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0 PCMU/8000/1.. a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101 telephone-even t/8000..a=fmtp:101 0-15..a=direction:active.. # U 226.145.234.80:5060 -> 219.242.10.153:5060 SIP/2.0 100 Trying..Via: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c 3976.0..Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060..From: sip:test@vo ip2.test.net;tag=2441840520..To: sip:256@voip2.test.net;user=phone;tag=2077 559661..Call-ID: 2303820380@226.145.234.113..CSeq: 2
INVITE..Server:
Cisco ATA 186 v2.16.2 ata18x (030909a)..Content-Length: 0....
Subject: Re: [Serusers] caller-id with raius using sip-rpid
Is there any Remote-Party-ID header field in outgoing INVITE ? If so then your gateway/whatever ignores it.
Jan.
On 02-10 15:18, Steve Dolloff wrote:
Any phone that supports caller-id. But I haven't gotten to work.
I'm
seeing the username instead.
Subject: RE: [Serusers] caller-id with raius using sip-rpid
Which phone device should I use to see caller ID information when using the ATA186?
Alejandro
--- Steve Dolloff sdolloff@noc.test.net escreveu: > At the top of the config I have the following
statement....
if (method=="INVITE") { record_route(); if (!radius_www_authorize("")) { log(1,"radius authfailure");
www_challenge("voip2.test.net","0"); break; }; append_rpid_hf(); };
If I call a phone with caller-id and my username is 256, it shows 256 on the phone, if I call with a username of test, it shows 4534 on the handset even though I have the sip-rpid set to 222.
Stephen
Subject: Re: [Serusers] caller-id with raius using sip-rpid
Retrieving caller-id when users register doesn't work because REGISTER messages are processed by the server and the server generates a reply only.
What you need is to insert Remote-Party-ID header field into INVITE message, to make it work you must authenticate also INVITE messages. My guess is that you do not authenticate INVITE messages and therefore there is nothing append_rpid_hf can add.
Jan.
On 02-10 11:35, Steve Dolloff wrote:
I want to retrieve the caller-id of a user from
radius when they
register and use it when I redirect an invite
request to the voicemail
system so that the voicemail system can route the
call based on
caller-id. I also want to be able to send it to
the sip gateway when I
am routing calls to the pstn.
I have this in my config currently and it doesn't
appear to set the
caller-id in the invite message.
rewritehostport("219.242.10.153:5061");
append_rpid_hf(); t_relay();Subject: Re: [Serusers] caller-id with raius using
sip-rpid
append_rpid_hf has no parameters. Version with 2
parameters is in
unstable branch in the CVS only. What exactly do
you want to do ?
Jan.
On 02-10 11:26, Steve Dolloff wrote: > I found this example in a previous Serusers
message.
> > append_rpid_hf("sip:+", >
"@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes");
> > I tried calling append_rpid_hf();, but it does
nothing.
> > I also tried >
append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes"
> ); but I get an unknown command presumably
because I am not using the
> right number of parameters. > > I only want to modify the calling-id info. > > Can anyone provide an example? > > -----Original Message----- > From: Jan Janak [mailto:jan@iptel.org] > Sent: Thursday, October 02, 2003 11:09 AM > To: Steve Dolloff > Cc: serusers@lists.iptel.org > Subject: Re: [Serusers] caller-id with raius
using sip-rpid
> > If you want to add Remote-Party-ID header field
then you have to call
> append_rpid_hf function in your script. > > Jan. > > On 02-10 11:07, Steve Dolloff wrote: > > OK, I am setting up a Voicemail system (using
asterisk) and I am
> > currently doing a rewritehostport(ip:port) and
then trelay() to send
> it > > to the voicemail system if an invite fails. > > > > Should I change something? See my ser.cfg and
output from the call
to > > the vm. > > > > Here is the code from ser.cfg > > > > > rewritehostport("219.242.10.153:5061"); > > t_relay(); > > > > Here is the sip info from asterisk. > > > > INVITE sip:200@219.242.10.153:5061;user=phone
SIP/2.0
> > Max-Forwards: 10 > > Record-Route:
sip:200@219.242.10.153;ftag=2236658534;lr=on
> > Via: SIP/2.0/UDP
219.242.10.153;branch=z9hG4bK13de.31901234.0
> > Via: SIP/2.0/UDP
226.145.234.113:5060;rport=5060
> > From: sip:test@voip2.test.net;tag=2236658534 > > To: sip:200@voip2.test.net;user=phone > > Call-ID: 2218108971@226.145.234.113 > > CSeq: 1 INVITE > > Contact:
sip:test@226.145.234.113:5060;transport=udp
> > User-Agent: Cisco ATA 186 v2.16.2 ata18x
(030909a)
> > Expires: 300 > > Content-Length: 271 > > Content-Type: application/sdp > > > > > > > > Subject: Re: [Serusers] caller-id with raius
using sip-rpid
> > > > Remote-Party-ID header field is inserted into
forwarded requests,
not > > responses. > > > > Jan. > > > > On 02-10 10:53, Steve Dolloff wrote: > > > Ser doesn't appear to be passing the
Caller-id to the ata at auth
or > I > > > am doing something wrong. Can anyone point
me in the right
> direction? > > > > > > Thanks, > > > > > > Stephen > > > > > > I have the following entry in my freeradius
users file.
> > > > > > test@voip2.test.net Auth-Type := Digest,
User-Password == "test"
> > > Reply-Message = "Hello, test with
digest", Sip-Rpid =
> > > "8472222222" > > > > > > When I run a radclient test I get the
correct info..
> > > > > > radclient -f digest.test 219.242.10.153:1812
auth testing
> > > Received response ID 134, code 2, length =
57
=== message truncated ===
Yahoo! Mail - o melhor webmail do Brasil http://mail.yahoo.com.br
-
Jan Janak -
Steve Dolloff