Hi,
I have still not reached the point of authentication, the failure is happening at establishment on the TCP connection between openSER and Diameter Client.
Thanks,
Priyanka
________________________________
From: raviprakash sunkara [mailto:sunkara.raviprakash.feb14@gmail.com] Sent: Tuesday, March 27, 2007 4:03 PM To: Priyanka Bhargava (WT01 - IP-Multimedia Carrier & Ent Networks) Subject: Re: [Users] Problem configuring the openSER with the DISC
Hello
Can u check the port forwoarding of diameter clinet and server, if there are in remote. In diameter server , client file is there, in that u need to give the openser username@domain.openSER and Password and nas ( n.w access server ) file in this U server has to know the DC and same in DC server file will this need to tell the DS.
I guess, Because , Radius and Diameter are Same purpose using in openSER and other AAA purpose. But in My experience Radius is Best,
On 3/27/07, priyanka.bhargava@wipro.com < priyanka.bhargava@wipro.com mailto:priyanka.bhargava@wipro.com > wrote:
Hi Ravi,
Thanks for your quick response. I'm actually connecting openSER with the diameter client. But the client is not accepting the connection. The configuration between the diameter client and server are already done. And they are communicating properly the only problem is the communication between the Diameter Client and the openSER.
Thanks,
Priyanka
________________________________
From: raviprakash sunkara [mailto:sunkara.raviprakash.feb14@gmail.com] Sent: Tuesday, March 27, 2007 2:16 PM To: Priyanka Bhargava (WT01 - IP-Multimedia Carrier & Ent Networks) Cc: users@openser.org Subject: Re: [Users] Problem configuring the openSER with the DISC
Hello Priyanka, Diameter and radius both are same purpose. DialMeter Server never communicate with OpenSER, Vice versa, So Need the DiaMeter client, Which play the main role to Both openSER or Diameter,
U problem in Diameter Clinet and server Configuration,
-UA -------->OpenSER-->DiameterClient ---> Diameter Server. in DiC u should configured the authentation, where the Server is located.
I'm Using the Radius for AAA,
Thanks & Regards Sunkara Ravi Prakash Hyd.....
On 3/27/07, priyanka.bhargava@wipro.com < priyanka.bhargava@wipro.com> wrote:
Hi All,
I'm trying use to Diameter Server Client (DISC) for the authentication purpose (using the auth_diameter module). But I'm facing issues while creating a connection between openSER and DISC. The diameter client does
not accept the connection from the openSER.
Please let me know if somebody has tried this out and can pass me the config files and the code changes if any.
Thanks, Priyanka
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
www.wipro.com
_______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users