[Serusers] Re: Help - sr-users

3 Feb 2004

Hi!

1. please always ask to the mailing list - so more people will help you, 
and others can also benefit from the solutions.

2. you need the nathelper module. take a look at the archive and search 
for nathelper, e.g. using google and search for:
   nathelper site:mail.iptel.org

there are several threads about nathelper and NAT problems. you can also 
find documentation in the README and the sample cfg of the nathelper module:
http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/nathelper/

also the ser-FAQ gives some tips:
http://iptel.org/~faqomatic/fom-serve/cache/85.html

regards,
Klaus

Joao Carlos Moura wrote:
...
  Dear Klaus -

 Thank for your support. I read the files from the list and I setup up my 
 SIP SERVER. After that, I restart my server and I receive,  unfortunatly 
 22 configuration error messages. I need to authenticate my equipments 
 (SP 200 - SIGNAL) with PRIVATE IP. Where can I suppose to find these 
 informations or even if you have and could send to my e-mail 
 informations that use this installed module like the example below:

 My sample: 

 SP200 (192.168.0.2)--------> to Be SIP Server (200.194.223.2) 

----------------------------------------------------------------------------------------------------------------------------------------------------
 The server can receive the contact from SP200 but can´t answer back. The 
 IP that´s generated and it s shown on MYSQL LOG
 is: 192.168.0.2. 

 Any clue?

 I count with your help and patience, 

 João Carlos Moura

 *João Carlos Moura
 NiNeTel Telecommunications
 +55 85 264-9039*