9 Oct
2006
9 Oct
'06
11:06 a.m.
Hello,
Is it possible to configure Openser as an application level gateway? I
am trying to setup a proxy server with Openser running on it and
configured to change the contact header fields of the sip message from a
private address to a public one. In line with this setup, the sip
message is then forwarded to a registrar server. I tried using the
mediaproxy setup on the ser getting started document but the registered
contact address still pertains the private one. Can someone help me on this?
Thanks!
11 Oct
11 Oct
3:27 p.m.
Hi,
Take a look to the module TEXTOPS and more specifically to the "subst"
function in order to change the contains of SIP message.
Christophe
-----Message d'origine-----
De : users-bounces(a)openser.org [mailto:users-bounces@openser.org] De la part
de Lindsey Hans Joseph Lao
Envoyé : lundi 9 octobre 2006 13:07
À : users(a)openser.org; bogdan(a)voice-system.ro
Objet : [Users] Openser as an application level gateway
Hello,
Is it possible to configure Openser as an application level gateway? I am
trying to setup a proxy server with Openser running on it and configured to
change the contact header fields of the sip message from a private address
to a public one. In line with this setup, the sip message is then forwarded
to a registrar server. I tried using the mediaproxy setup on the ser getting
started document but the registered contact address still pertains the
private one. Can someone help me on this?
Thanks!
3:36 p.m.
Hello Sir,
Thank you for your pointers. :-) I was able to successfully register
the public IP of the Openser acting as a proxy server. Although I have
encountered another problem... I am not able to manipulate the host part
of the contact header such that it will still remain the same. Any
suggestions?
Thank you so much.
Hans
Christophe Irles wrote:
Hi,
Take a look to the module TEXTOPS and more specifically to the "subst"
function in order to change the contains of SIP message.
Christophe
-----Message d'origine-----
De : users-bounces(a)openser.org [mailto:users-bounces@openser.org] De la part
de Lindsey Hans Joseph Lao
Envoyé : lundi 9 octobre 2006 13:07
À : users(a)openser.org; bogdan(a)voice-system.ro
Objet : [Users] Openser as an application level gateway
Hello,
Is it possible to configure Openser as an application level gateway? I am
trying to setup a proxy server with Openser running on it and configured to
change the contact header fields of the sip message from a private address
to a public one. In line with this setup, the sip message is then forwarded
to a registrar server. I tried using the mediaproxy setup on the ser getting
started document but the registered contact address still pertains the
private one. Can someone help me on this?
Thanks!
12 Oct
12 Oct
8:16 a.m.
you can also take a look at the openser used in the milkfish project.
regards
klaus
Christophe Irles wrote:
Hi,
Take a look to the module TEXTOPS and more specifically to the "subst"
function in order to change the contains of SIP message.
Christophe
-----Message d'origine-----
De : users-bounces(a)openser.org [mailto:users-bounces@openser.org] De la part
de Lindsey Hans Joseph Lao
Envoyé : lundi 9 octobre 2006 13:07
À : users(a)openser.org; bogdan(a)voice-system.ro
Objet : [Users] Openser as an application level gateway
Hello,
Is it possible to configure Openser as an application level gateway? I am
trying to setup a proxy server with Openser running on it and configured to
change the contact header fields of the sip message from a private address
to a public one. In line with this setup, the sip message is then forwarded
to a registrar server. I tried using the mediaproxy setup on the ser getting
started document but the registered contact address still pertains the
private one. Can someone help me on this?
Thanks!
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
8:54 a.m.
Hello,
Does anyone happen to have the openser script used by the milkfish
project. I tried googling it but nothing comes up.
Thanks!
Klaus Darilion wrote:
you can also take a look at the openser used in the
milkfish project.
regards
klaus
Christophe Irles wrote:
Hi,
Take a look to the module TEXTOPS and more specifically to the "subst"
function in order to change the contains of SIP message.
Christophe
-----Message d'origine-----
De : users-bounces(a)openser.org [mailto:users-bounces@openser.org] De
la part
de Lindsey Hans Joseph Lao
Envoyé : lundi 9 octobre 2006 13:07
À : users(a)openser.org; bogdan(a)voice-system.ro
Objet : [Users] Openser as an application level gateway
Hello,
Is it possible to configure Openser as an application level gateway?
I am
trying to setup a proxy server with Openser running on it and
configured to
change the contact header fields of the sip message from a private
address
to a public one. In line with this setup, the sip message is then
forwarded
to a registrar server. I tried using the mediaproxy setup on the ser
getting
started document but the registered contact address still pertains the
private one. Can someone help me on this?
Thanks!
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
9:09 a.m.
AFAIR it is in the milkfish package, not in the openser package.
regards
klaus
Lindsey Hans Joseph Lao wrote:
Hello,
Does anyone happen to have the openser script used by the milkfish
project. I tried googling it but nothing comes up.
Thanks!
Klaus Darilion wrote:
you can also take a look at the openser used in
the milkfish project.
regards
klaus
Christophe Irles wrote:
Hi,
Take a look to the module TEXTOPS and more specifically to the "subst"
function in order to change the contains of SIP message.
Christophe
-----Message d'origine-----
De : users-bounces(a)openser.org [mailto:users-bounces@openser.org] De
la part
de Lindsey Hans Joseph Lao
Envoyé : lundi 9 octobre 2006 13:07
À : users(a)openser.org; bogdan(a)voice-system.ro
Objet : [Users] Openser as an application level gateway
Hello,
Is it possible to configure Openser as an application level gateway?
I am
trying to setup a proxy server with Openser running on it and
configured to
change the contact header fields of the sip message from a private
address
to a public one. In line with this setup, the sip message is then
forwarded
to a registrar server. I tried using the mediaproxy setup on the ser
getting
started document but the registered contact address still pertains the
private one. Can someone help me on this?
Thanks!
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6487
days inactive
6490
days old
5 comments
3 participants
participants (3)
-
Christophe Irles -
Klaus Darilion -
Lindsey Hans Joseph Lao