sr-users October 2003

sr-users@lists.kamailio.org

105 participants
230 discussions

[Serusers] Multple SER servers on same domain
by Tjardick van der Kraan 07 Oct '03

07 Oct '03

Hello Everyone, Just a new face on the mailinglist (only been lurking so far) so just a friendly hi from me to all of you. I was wondering if the following idea could be realised with the use of SER and some (advanced) routing rules. One main SER server with one or more 'slave' SER servers running at their own location with a synchronized user database, but with their own presence table. e.g. if someone on the main SER server asks for a connectiong with a user on a 'sub' ser server of the same domain, the main SER server looks up if the user is online on it's server if not it checks if the user is online on one (or more) sub servers. What i like to accomplish is multple local networks that run their own ser server and support their 'local' connections, but sometimes there is a connection available to another local network, in which case more users can be reached. so on a request and fail of the user online on the local server it would try and see if it can connect to (any) other server and if so query if the user is online there. so everyone will be user(a)domain.com but it would point to the ip of the local server. Any config examples on how to achive this if possible would really be appreciated. Kind regards, Tjardick van der Kraan -- Tjardick van der Kraan tjardick(a)vanderkraan.net Tel +32 4 34 40 522 Fax +32 4 34 40 525 GSM +32 497 45 27 36 IAXtel: 1 700 344 0522 FWD: 26322 IPtel: 91331 Rue des Pocheteux 10 4020 Jupille Belgium

2 1

[Serusers] multiple enum lookups
by Jakob Schlyter 06 Oct '03

06 Oct '03

is it possible to somehow change paramters during runtime? I need to look up users in two different enum domains - first in e164.arpa and, if not found, in e164.foo.bar (2nd enum is for internal provider routing purposes). if not, should we add a enum_query_domain(service, domain) that enables this? jakob

2 1

Re: [Serusers] Registrar.so error
by giAndrea 06 Oct '03

06 Oct '03

At 17.32 06/10/2003 +0200, you wrote: >At 05:12 PM 10/6/2003, giAndrea wrote: > > >Hi, another problem. > > > >After compilation of new sources (0.8.12dev-17-cristian) i've found this > problem in modules registrar.so during execution (/etc/init/ser start) > > > >Oct 6 16:19:09 webby ser: 0(0) fixing > /usr/lib/ser/modules/registrar.so save > >Oct 6 16:19:09 webby ser: 0(0) qm_malloc(0x42134000, 16) called from > dlist.c: new_dlist(156) > >Oct 6 16:19:09 webby ser: 0(0) qm_malloc(0x42134000, 16) returns > address 0x422bea0c frag. 0x422be9f4 (size=16) on 1 -th hit > >Oct 6 16:19:09 webby ser: 0(0) qm_malloc(0x42134000, 8) called from > dlist.c: new_dlist(163) > >Oct 6 16:19:09 webby ser: 0(0) qm_malloc(0x42134000, 8) returns > address 0x422bea4c frag. 0x422bea34 (size=8) on 1 -th hit > >Oct 6 16:19:09 webby ser: 0(0) qm_malloc(0x42134000, 36) called from > udomain.c: new_udomain(117) > >Oct 6 16:19:09 webby ser: 0(0) qm_malloc(0x42134000, 36) returns > address 0x422bea84 frag. 0x422bea6c (size=36) on 1 -th hit > >Oct 6 16:19:09 webby ser: 0(0) qm_malloc(0x42134000, 8192) called from > udomain.c: new_udomain(124) > >Oct 6 16:19:09 webby ser: 0(0) qm_malloc(0x42134000, 8192) returns > address 0x422bead8 frag. 0x422beac0 (size=8192) on 1 -th hit > >Oct 6 16:19:09 webby ser: 0(0) qm_malloc(0x80c17c0, 9) called from > db_con.c: use_table(53) > >Oct 6 16:19:09 webby ser: 0(0) qm_malloc(0x80c17c0, 12) returns > address 0x80cb9dc frag. 0x80cb9c4 (size=12) on 1 -th hit > >Oct 6 16:19:09 webby ser: 0(0) submit_query(): Unknown column 'flags' > in 'field list > >See what it tells you :) I've seen that, but i supposed that i was an error on source and not in db. I provide to correct my db structure. thanks. >You are using development version in which database structures have not >been updated yet. I suppose you actually don't want to take the development >version. > >It takes now a new column, called "flags". It is an int(11). > >-jiri -------------------------------------------------------------------------------------- There is no world without Verona's walls but purgatory, torture, hell itself. Hence-banished is banished from the world, and world's exile is death [Shakespeare: Romeo and Juliet - Act III - Scene III]

1 0

RE: [Serusers] voicemail question - dial plan example - pstngatewayexample
by Steve Dolloff 06 Oct '03

06 Oct '03

THANK YOU. That works. Stephen Subject: RE: [Serusers] voicemail question - dial plan example - pstngatewayexample Steve, Have you tried using "append_branch()" after "rewritehostport(<new uri>)"? Jaime From: Steve Dolloff <sdolloff(a)noc.dls.net> on 03/10/2003 15:04 To: Alexander Mayrhofer <axelm(a)nic.at>@SMTP@Exchange Jiri Kuthan <jiri(a)iptel.org>@SMTP@Exchange serusers@lists.iptel.org@SMTP@Exchange cc: Subject: RE: [Serusers] voicemail question - dial plan example - pstngatewayexample Any other suggestions? Subject: Re: [Serusers] voicemail question - dial plan example - pstngateway example On (02.10.03 23:28), Alexander Mayrhofer wrote: > replacing > > rewritehostport("219.242.10.153:5061"); > > with > > append_branch("sip:219.242.10.153:5061"); > > in the fialure_route should do the trick. err, i hate replying to my own mails. The above line will make you loose the user part of the URI, and is therefore not a working solution ... we'd need a function to reset the branch status value here, which afaik does currently not exist ... axelm _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers ************************************************************************ ******* Important. Confidentiality: This communication is intended for the above-named person and may be confidential and/or legally privileged. Any opinions expressed in this communication are not necessarily those of the company. If it has come to you in error you must take no action based on it, nor must you copy or show it to anyone; please delete/destroy and inform the sender immediately. Monitoring/Viruses Orange may monitor all incoming and outgoing emails in line with current legislation. Although we have taken steps to ensure that this email and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Orange PCS Limited is a subsidiary of Orange SA and is registered in England No 2178917, with its address at St James Court, Great Park Road, Almondsbury Park, Bradley Stoke, Bristol BS32 4QJ. ************************************************************************ *******

2 1

[Serusers] Can you help me!
by 郝育鹏 06 Oct '03

06 Oct '03

Dear Teacher: How are you! I'am in china.I install ser in my computer. But when I login with Windows message 4.6 ,Ser server don't authenticate my usename. How do I config? when I login server every time, Server can request authentication. Help me! thank you! Mr, hao How are you! Is file name of SER script ser.cfg ? my SER script be shown at last , Is it correct? Thank you very much! # # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- # modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("Lserver", "subscriber")) { www_challenge("Lserver", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } # Then end

2 1

[Serusers] Message Waiting Indicator
by Josh Newman 06 Oct '03

06 Oct '03

Does anyone know how I can send from ser a NOTIFY (or is perhaps INFO) message to a Cisco ATA 186 or other UA to turn on/off the message waiting indicator for voicemail. The Cisco ATA is capable of playing a stuttered dial tone to indicate voicemail but I cannot find any documentation on how to toggle this tone on/off from the proxy. I also have other sip phones like the Grandstream where I would like to signal the MWI to it as well. Does anyone know how this can be done? I assume via the ser_fifo, but what kind of message and what should it look like? -- Josh

5 5

[Serusers] Meaning of ftag-Parameter
by Franz Edler 06 Oct '03

06 Oct '03

Hello, Can anybody please tell me the meaning of the ftag-Parameter in Record-Route Header which SER uses? e.g.: Record-Route: <sip:409870@192.246.69.223;ftag=180507275;lr=on> Franz

3 2

[Serusers] prob with acc module
by John Foster 06 Oct '03

06 Oct '03

Hi all Here are lines from my ser.cfg modparam("acc", "radius_missed_flag", 3) modparam("acc", "radius_log_flag", 1) # ------------------------- request routing logic ------------------- I m getting Oct 6 00:07:45 voice ser: set_mod_param_regex: parameter <radius_log_flag> not found in module <acc> Oct 6 00:07:45 voice ser: parse error (73,37-38): Can't set module parameter in logs, ser doesnt run, while compiled acc module with radius support ON, ser isnt recognizing radius_log_flag param. Any idea? JF --------------------------------- Do you Yahoo!? The New Yahoo! Shopping - with improved product search

2 1

RE: [Serusers] voicemail question - dial plan example - pstngatewayexample
by GIL, Jaime 06 Oct '03

06 Oct '03

Steve, Have you tried using "append_branch()" after "rewritehostport(<new uri>)"? Jaime From: Steve Dolloff <sdolloff(a)noc.dls.net> on 03/10/2003 15:04 To: Alexander Mayrhofer <axelm(a)nic.at>@SMTP@Exchange Jiri Kuthan <jiri(a)iptel.org>@SMTP@Exchange serusers@lists.iptel.org@SMTP@Exchange cc: Subject: RE: [Serusers] voicemail question - dial plan example - pstngatewayexample Any other suggestions? Subject: Re: [Serusers] voicemail question - dial plan example - pstngateway example On (02.10.03 23:28), Alexander Mayrhofer wrote: > replacing > > rewritehostport("219.242.10.153:5061"); > > with > > append_branch("sip:219.242.10.153:5061"); > > in the fialure_route should do the trick. err, i hate replying to my own mails. The above line will make you loose the user part of the URI, and is therefore not a working solution ... we'd need a function to reset the branch status value here, which afaik does currently not exist ... axelm _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers ******************************************************************************* Important. Confidentiality: This communication is intended for the above-named person and may be confidential and/or legally privileged. Any opinions expressed in this communication are not necessarily those of the company. If it has come to you in error you must take no action based on it, nor must you copy or show it to anyone; please delete/destroy and inform the sender immediately. Monitoring/Viruses Orange may monitor all incoming and outgoing emails in line with current legislation. Although we have taken steps to ensure that this email and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Orange PCS Limited is a subsidiary of Orange SA and is registered in England No 2178917, with its address at St James Court, Great Park Road, Almondsbury Park, Bradley Stoke, Bristol BS32 4QJ. *******************************************************************************

1 0

Re: [Serusers] Message Waiting Indicator
by Jiri Kuthan 05 Oct '03

05 Oct '03

I'm not sure how the "turn-off-lamp" NOTIFY is supposed to look like either. Someone requested us to send Cisco's "reboot" NOTIFY, which is implemented in serctl using ser_fifo. If you learn how the NOTIFY is supposed to look like, aligning serctl to your need should be fairly simple. -jiri At 05:13 AM 10/5/2003, Josh Newman wrote: >Content-Type: multipart/alternative; > boundary="----_=_NextPart_001_01C38AEE.A0208F26" >Content-class: urn:content-classes:message > >Does anyone know how I can send from ser a NOTIFY (or is perhaps INFO) message to a Cisco ATA 186 or other UA to turn on/off the message waiting indicator for voicemail. The Cisco ATA is capable of playing a stuttered dial tone to indicate voicemail but I cannot find any documentation on how to toggle this tone on/off from the proxy. I also have other sip phones like the Grandstream where I would like to signal the MWI to it as well. Does anyone know how this can be done? I assume via the ser_fifo, but what kind of message and what should it look like? > > > >-- Josh >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

← Newer
1
...
15
16
17
18
19
20
21
22
23
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2003