sr-users July 2003

sr-users@lists.kamailio.org

67 participants
160 discussions

[Serusers] configuration examples for using "dbtext" and "pa"

by Kevin Chu

Hi, I tried to use the "dbtext" and "pa" modules included in SER 0.8.11pre29 package. However, I can not figure out the correct configuration to make them work. Is there any configuration examples for using those modules? Thanks, Kevin

21 years, 4 months

[Serusers] serclt error

by giAndrea

Hello i've installed ser-0.8.11pre29-1.i386.rpm and mysql support. I've started ser service, but when i use serctl command to add new user this is the response: ERROR 1054 at line 1: Unknown column 'user_id' in 'where clause' ERROR 1054 at line 1: Unknown column 'user_id' in 'field list' introducing a new user to the database failed why? I think that the configuration file ser.cfg is ok. thanks to all. Andrea ------------------------------------------------------- Andrea Girardi mobile +39 347 9624051 http://www.giandrea.com

21 years, 4 months

[Serusers] Â ñâÿçè ñ çàêðûòèåì ñêëàäà ðàñïðîäàåì ìîáèëüíûå òåëåôîíû. Äîñòàâêà ïî Ìîñêâå. 238279

by 238279＠hotmail.com

21 years, 4 months

RE: [Serusers] Xten and SER problem

by Marcelo Schmidt

Heh got the same problem so to test quickly I enter a new contact in Phonebook and add Its SpeedNo: -m Btw: the UI kinda sucks. -----Original Message----- From: Rich Adamson [mailto:radamson@routers.com] Sent: Tuesday, July 22, 2003 3:00 PM To: serusers(a)lists.iptel.org Subject: RE: [Serusers] Xten and SER problem > If all else fails you could try X-Lite v2.0 released today: > http://www.xten.com/lite.php Side question... I've got xten lite running on a Dell Axim, and the screen indicates it has logged in to the defined server. However, since the xten image consumes the entire screen, I can't access the Axim keyboard to enter a sip address. (Just purchased the Axim). Anyone know how to bring up the keyboard in order to enter the sip address? Rich _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

21 years, 4 months

RE: [Serusers] Xten and SER problem

by Yang Xiang

Hello, I think the point ist that you use the IP of your proxy as the realm instead of your domain in X-Lite. You can see it in the call-ID in your messages: -------------------- SEND >> 192.168.1.2:5060 REGISTER sip:192.168.1.2 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.203:5060 From: <sip:1000@192.168.1.2> To: <sip:1000@192.168.1.2> Contact: "JesusR" <sip:1000@192.168.1.203:5060> Call-ID: 854E48C84C104A5DB92CE4A65ABC2406(a)192.168.1.2 CSeq: 31483 REGISTER Expires: 500 User-Agent: X-Lite build 1016 Content-Length: 0 ----------------------- Notice the call-id is xxxx(a)192.168.1.2 but not xxxx(a)voztelecom.net. However, in the 401-challenge which you received the realm is "voztelecom.net": ---------- WWW-Authenticate: Digest algorithm=MD5,nonce="3f1c562000000000dded3e97ed7f89d3722ff12d3704a884",realm ="voztelecom.net" ------------- I think you should change your realm in X-Lite from 192.168.1.2 to voztelecom.net and everything will be ok. Otherwise, the X-Lite will treat the 401 response as an illegal challenge and won't send back his credential. Best regards yang

21 years, 4 months

RE: [Serusers] Xten and SER problem

by Marcelo Schmidt

I've been using xten 1.x without problems. I just downloaded the xten 2.0, it seems to work ok too. I'd would say it is a config error in ser or in your xten settings. -m -----Original Message----- From: Jesus Rodriguez [mailto:jesusr@voztele.com] Sent: Tuesday, July 22, 2003 1:25 AM To: Erik Lagerway Cc: serusers(a)lists.iptel.org; sip-implementors(a)cs.columbia.edu Subject: RE: [Serusers] Xten and SER problem On Mon, 21 Jul 2003, Erik Lagerway wrote: Hi Erik, > Sounds like a config error, does it work with other SIP UAs? Yes, it works. I can register other UAs with this same SER. But, this Xten, works great with some Vocals and Asterisks we have here. I've been looking again the configuration i don't really know which can be the mistake. The most strange is that Xten does not send any answer to the WWW-Authenticate. For example, the difference between Vocal and SER is the order of the parameters sent in the challenge and the size of the nonce parameter and Xten registers with no problem in Vocal. I will look again. > If all else fails you could try X-Lite v2.0 released today: > http://www.xten.com/lite.php Ok, i'll try and let you know. Thanks!!. > -----Original Message----- > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On > Behalf Of Jesus Rodriguez > Sent: Monday, July 21, 2003 1:58 PM > To: serusers(a)lists.iptel.org > Subject: [Serusers] Xten and SER problem > > > Hello, > > I'm trying to register an Xten (1016 build) to SER and i always get a > "401" response. Registering an ATA186 to the same SER with the same > user and pass works with no problem (logs below Xten). We have tried > SIPPS and registers ok too. > > Xten send the REGISTER, SER answers with a WWW-Authenticate challenge > but Xten doesn't send anything, just sends a new REGISTER after few > seconds: > > (c)2003 Xten Networks Inc. All rights reserved. > Private build: 1016 > > SIP: 192.168.1.203:5060 > RTP: 192.168.1.203:8000 > NAT: 192.168.1.203 > > PXY#0: 192.168.1.2:5060 > > > SEND >> 192.168.1.2:5060 > REGISTER sip:192.168.1.2 SIP/2.0 > Via: SIP/2.0/UDP 192.168.1.203:5060 > From: <sip:1000@192.168.1.2> > To: <sip:1000@192.168.1.2> > Contact: "JesusR" <sip:1000@192.168.1.203:5060> > Call-ID: 854E48C84C104A5DB92CE4A65ABC2406(a)192.168.1.2 > CSeq: 31483 REGISTER > Expires: 500 > User-Agent: X-Lite build 1016 > Content-Length: 0 > > > RECEIVE << 192.168.1.2:5060 > SIP/2.0 401 Unauthorized > Via: SIP/2.0/UDP 192.168.1.203:5060 > From: <sip:1000@192.168.1.2> > To: <sip:1000@192.168.1.2>;tag=d907c037823644515dfe0ede38ca9976.d844 > Call-ID: 854E48C84C104A5DB92CE4A65ABC2406(a)192.168.1.2 > CSeq: 31483 REGISTER > WWW-Authenticate: Digest > algorithm=MD5,nonce="3f1c562000000000dded3e97ed7f89d3722ff12d3704a884" > ,realm > ="voztelecom.net" > Server: Sip EXpress router (0.8.10 (i386/linux)) > Content-Length: 0 > Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=13588 > req_src_ip=192.168.1.203 in_uri=sip:192.168.1.2 out_uri=sip:192.168.1.2 > via_cnt==1" > > > RECEIVE << 192.168.1.2:5060 > SIP/2.0 401 Unauthorized > Via: SIP/2.0/UDP 192.168.1.203:5060 > From: <sip:1000@192.168.1.2> > To: <sip:1000@192.168.1.2>;tag=d907c037823644515dfe0ede38ca9976.d844 > Call-ID: 854E48C84C104A5DB92CE4A65ABC2406(a)192.168.1.2 > CSeq: 31483 REGISTER > WWW-Authenticate: Digest > algorithm=MD5,nonce="3f1c562000000000dded3e97ed7f89d3722ff12d3704a884" > ,realm > ="voztelecom.net" > Server: Sip EXpress router (0.8.10 (i386/linux)) > Content-Length: 0 > Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=13589 > req_src_ip=192.168.1.203 in_uri=sip:192.168.1.2 out_uri=sip:192.168.1.2 > via_cnt==1" > > > SEND >> 192.168.1.2:5060 > REGISTER sip:192.168.1.2 SIP/2.0 > Via: SIP/2.0/UDP 192.168.1.203:5060 > From: <sip:1000@192.168.1.2> > To: <sip:1000@192.168.1.2> > Contact: "JesusR" <sip:1000@192.168.1.203:5060> > Call-ID: 854E48C84C104A5DB92CE4A65ABC2406(a)192.168.1.2 > CSeq: 31485 REGISTER > Expires: 500 > User-Agent: X-Lite build 1016 > Content-Length: 0 > > > RECEIVE << 192.168.1.2:5060 > SIP/2.0 401 Unauthorized > Via: SIP/2.0/UDP 192.168.1.203:5060 > From: <sip:1000@192.168.1.2> > To: <sip:1000@192.168.1.2>;tag=d907c037823644515dfe0ede38ca9976.d844 > Call-ID: 854E48C84C104A5DB92CE4A65ABC2406(a)192.168.1.2 > CSeq: 31485 REGISTER > WWW-Authenticate: Digest > algorithm=MD5,nonce="3f1c562200000000e06a238bd1858769f2e46b11d8d837f1" > ,realm > ="voztelecom.net" > Server: Sip EXpress router (0.8.10 (i386/linux)) > Content-Length: 0 > Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=13588 > req_src_ip=192.168.1.203 in_uri=sip:192.168.1.2 out_uri=sip:192.168.1.2 > via_cnt==1" > > > The same action works ok with ATA186: > > [0:0] Tx Msg to 192.168.1.2:5060 > > REGISTER sip:192.168.1.2 SIP/2.0 > Via: SIP/2.0/UDP 192.168.1.202:5060 > From: <sip:4070@192.168.1.2;user=phone>;tag=403901681 > To: <sip:4070@192.168.1.2;user=phone> > Call-ID: 2622180140(a)192.168.1.202 > CSeq: 1 REGISTER > Contact: > <sip:4070@192.168.1.202:5060;user=phone;transport=udp>;expires=60 > User-Agent: Cisco ATA 186 v2.16 ata18x (030401a) > Content-Length: 0 > > > [0]Rx Msg from 192.168.1.2:5060 > > SIP/2.0 401 Unauthorized > Via: SIP/2.0/UDP 192.168.1.202:5060 > From: <sip:4070@192.168.1.2;user=phone>;tag=403901681 > To: > <sip:4070@192.168.1.2;user=phone>;tag=d907c037823644515dfe0ede38ca9976 > .9cf4 > Call-ID: 2622180140(a)192.168.1.202 > CSeq: 1 REGISTER > WWW-Authenticate: Digest > algorithm=MD5,nonce="3f1c579a00000000aa6fd2432e429f54e3 > 7e75981218834b",realm="voztelecom.net" > Server: Sip EXpress router (0.8.10 (i386/linux)) > Content-Length: 0 > Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=13590 > req_src_ip=192.16 > 8.1.202 in_uri=sip:192.168.1.2 out_uri=sip:192.168.1.2 via_cnt==1" > > > [0]Reg Resp 401; Unauthorized > [0]REGISTER Retry 0 > [0:0] Tx Msg to 192.168.1.2:5060 > > REGISTER sip:192.168.1.2 SIP/2.0 > Via: SIP/2.0/UDP 192.168.1.202:5060 > From: <sip:4070@192.168.1.2;user=phone>;tag=403901681 > To: <sip:4070@192.168.1.2;user=phone> > Call-ID: 2622180140(a)192.168.1.202 > CSeq: 2 REGISTER > Contact: > <sip:4070@192.168.1.202:5060;user=phone;transport=udp>;expires=60 > User-Agent: Cisco ATA 186 v2.16 ata18x (030401a) > Authorization: Digest > username="4070",realm="voztelecom.net",nonce="3f1c579a0000 > 0000aa6fd2432e429f54e37e75981218834b",uri="sip:192.168.1.2",response="fe 07b8 > be83 > 0305cca7a28bf35c112270" > Content-Length: 0 > > > [0]Rx Msg from 192.168.1.2:5060 > > SIP/2.0 200 OK > Via: SIP/2.0/UDP 192.168.1.202:5060 > From: <sip:4070@192.168.1.2;user=phone>;tag=403901681 > To: > <sip:4070@192.168.1.2;user=phone>;tag=d907c037823644515dfe0ede38ca9976 > .9cf4 > Call-ID: 2622180140(a)192.168.1.202 > CSeq: 2 REGISTER > Contact: > <sip:4070@192.168.1.202:5060;user=phone;transport=udp>;q=0.00;expires=6 > 0 > Server: Sip EXpress router (0.8.10 (i386/linux)) > Content-Length: 0 > Warning: 392 192.168.1.2:5060 "Noisy feedback tells: pid=13589 > req_src_ip=192.16 > 8.1.202 in_uri=sip:192.168.1.2 out_uri=sip:192.168.1.2 via_cnt==1" > > > Thanks in advance. > > Saludos > JesusR. > > ------------------------------- > Jesus Rodriguez > VozTelecom Sistemas, S.L. > jesusr(a)voztele.com > http://www.voztele.com > Tel. 902360305 > ------------------------------- > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > > Saludos JesusR. ------------------------------- Jesus Rodriguez VozTelecom Sistemas, S.L. jesusr(a)voztele.com http://www.voztele.com Tel. 902360305 ------------------------------- _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

21 years, 4 months

Re: [Serusers] serclt error

by giAndrea

At 18.25 22/07/2003 +0800, you wrote: >You should have your SQL database structure updated. Run >/usr/local/sbin/ser_mysql.sh and try again. i've done..... but nothing happens.... ./ser_mysql.sh create > > >>----- Original Message ----- >>From: <mailto:andrea@giandrea.com>giAndrea >>To: <mailto:serusers@lists.iptel.org>serusers(a)lists.iptel.org >>Sent: Tuesday, July 22, 2003 5:20 PM >>Subject: [Serusers] serclt error >> >>Hello >> >>i've installed ser-0.8.11pre29-1.i386.rpm and mysql support. I've started >>ser service, but when i use serctl command to add new user this is the >>response: >> >>ERROR 1054 at line 1: Unknown column 'user_id' in 'where clause' >>ERROR 1054 at line 1: Unknown column 'user_id' in 'field list' >>introducing a new user to the database failed >> >>why? I think that the configuration file ser.cfg is ok. >> >>thanks to all. >>Andrea >> >>------------------------------------------------------- >>Andrea Girardi >>mobile +39 347 9624051 >>http://www.giandrea.com >> >> >>---------- >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers > >---------------------------------- >Legge di Clarke sulle idee rivoluzionarie >Ogni idea rivoluzionaria - in campo scientifico, artistico o altro provoca >tre stadi di reazione, riassumibili nelle seguenti frasi: >1. "E' impossibile; non farmi perdere tempo". >2. "E' possibile, ma non val la pena di farlo". >3. "L'ho sempre detto, io, che era un'ottima idea".

21 years, 4 months

[Serusers] Questions??

by Hassan CHOUMAR

Hello to all, I installed Serweb of ser, but I have a probleme is that every time during rengistrement of the data I have a message (sorry - fifo reading error), what is that nobody where from comes this error. Thank you in advance Hassan CHOUMAR Hassan cité universitaire de la pacaterie (chambre459) 91400 Orsay Por :33/0675909977 Email: hmchoumar(a)hotmail.com

21 years, 4 months

[Serusers] aquestions??

by Hassan CHOUMAR

CHOUMAR Hassan cité universitaire de la pacaterie (chambre459) 91400 Orsay Por :33/0675909977 Email: hmchoumar(a)hotmail.com

21 years, 4 months

[Serusers] "ftag" parameter in Record-Route header?

by Kevin Chu

Hi, I am testing SER version 0.8.11pre29 with two MSN Messenger(v4.6) clients. I tried to send the following MESSAGE through SER with record-route header added by SER. However, the receiving MSN client responded with a 400 Bad Request for that message. > MESSAGE sip:192.170.106.49:7281 SIP/2.0 > Max-Forwards: 10 > Record-Route: <sip:kchu@192.170.106.71;ftag=720e429c-41f0-4e2e-b7d0-fb238d4bc85c;lr> > Via: SIP/2.0/UDP 192.170.106.71;branch=z9hG4bK0c1f.a4d6a5.0 > Via: SIP/2.0/UDP 192.170.106.101:8111 > From: "ychu" <sip:ychu@192.170.106.71>;tag=720e429c-41f0-4e2e-b7d0-fb238d4bc85c > To: <sip:kchu@192.170.106.71> > Call-ID: c09c262c-2f27-489e-b69d-01ae5a5ddb84(a)192.170.106.101 > CSeq: 1 MESSAGE > Contact: <sip:192.170.106.101:8111> > User-Agent: Windows RTC/1.0 > Content-Type: text/plain; charset=UTF-8;msgr=WAAtAE0ATQBTAC0ASQBNAC0ARgBvAHIAbQBhAHQAOgAgAEYATgA9AE0AU wAlADIAMABTAGgAZQBsAGwAJQAyADAARABsAGcAOwAgAEUARgA9ADsAIABDAE8APQAwADsAIABDA FMAPQAwADsAIABQAEYAPQAwAA0ACgANAAoA > Content-Length: 12 I noticed that there is a "ftag" parameter in the Record-Route header, but I can't find any definition for it from rfc3261. Is that a new parameter defined in somewhere? I was just wondering that it is the reason why MSN client was complaining about that message? BR, Kevin

21 years, 4 months

← Newer
1
...
5
6
7
8
9
10
11
...
16
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2003