Hi All.
I'm getting this error message in my log file. Can someone give me a hint as to how to avoid this?
The message that caused these entries is below. The ACK message is from sems which I'm using the
IVR module with sipums for voicemail.
Regards,
Paul
Nov 15 23:24:39 sip01 /usr/local/sbin/ser[24904]: ACK sip:ivr+9990010005@66.90.42.100 SIP/2.0^M
Via: SIP/2.0/UDP 172.16.1.34;branch=z9hG4bKf9f038d4d9a17d85^M From: "Paul Hazlett"
<sip:9990010005@sip.mycompany.com;user=phone>;tag=fdd52bbab43c5601^M To:
<sip:1010@sip.mycompany.com;user=phone>;tag=000061212575231A^M Contact:
<sip:9990010005@172.16.1.34;user=phone>^M Call-ID: 2a4cbf381c068a5a(a)172.16.1.34^M CSeq: 49613
ACK^M User-Agent: Grandstream BT100 1.0.5.11^M Max-Forwards: 70^M Allow:
INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE^M Content-Length: 0^M ^M
Nov 15 23:24:39 sip01 /usr/local/sbin/ser[24904]: ERROR: extract_body: message body has length
zero
Nov 15 23:24:39 sip01 /usr/local/sbin/ser[24904]: ERROR: fix_nated_sdp: cannot extract body from
msg!
__________________________________
Do you Yahoo!?
The all-new My Yahoo! - Get yours free!
http://my.yahoo.com
Hi Ahmed. When you start up x-lite, it will try to register on your server.
When x-lite gets an ok from your server, you will see the message "Logged in
- Enter Phone Number". Look at the log diagnostic to give you an idea what
it's trying to do. Make sure that xlite is using the right ip address.
I really had to make just a few changes in order to register on my ser
server. Pay particular attention to the SIP proxy ip, the outbound proxy ip.
Let me know what you find.
-----Original Message-----
From: Ahmed Boreau [mailto:ahmed.boreau@esmt.sn]
Sent: Tuesday, November 16, 2004 7:31 AM
To: S Shah
Subject: Re: [Serusers] xlite voice session
Hi,
I got a call failed with a 404 not found.
Could you help ?
Thanks in advance
At 16:11 15/11/2004, you wrote:
>I finally got xlite to somewhat work with my SER server. On my lan, I'm
>able to get a voice session going between two xlite user agents running on
>two different computers. I then tried to gt a voice conversation on an
>xlite useragent running on a computer outside of the local network. I was
>able to establish a connection w/ the outside computer, but neither of us
>could hear each other.
>
>
>
>Does anyone have a clue what could be the problem here?
>
>
>
>Thanks in advance.
>
>
>
>Sher
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
Hello,
What exactly does it mean when when there're a lot of "waiting"
transactions shown in "serctl moni"? For example:
Transaction Statistics
Current: 28 (403 waiting) Total: 74796 (0 local)
Are this waiting transactions already processed and wait for termination
or are they queued for processing? If the latter, would increasing the
number of children help (currently 16 children for ~40 call attempts per
minute and ~100 registration attempts per minute (half of it
unauthorized) with ~50ms latency for a SIP OPTION)?
Regards,
Andy
Hi all,
I have downloaded the latest module of sems, have python library and when
compiling I am having the error below:~
Please help..........
make[3]: Entering directory `/root/answer_machine/plug-in/ivr'
make[4]: Entering directory `/root/answer_machine/plug-in/ivr'
make[4]: Nothing to be done for `deps'.
make[4]: Leaving directory `/root/answer_machine/plug-in/ivr'
make[4]: Entering directory `/root/answer_machine/plug-in/ivr'
g++ -I ../.. -Wall -Wno-reorder -D_DEBUG -g -DTHREAD_SAVE -D_REENTRANT
-D_THREAD_SAFE -fPIC -I/usr/include/python2.2 -c Ivr.cpp -o Ivr.o
Ivr.cpp: In member function `virtual void
IvrDialog::onSessionStart(AmRequest*)':
Ivr.cpp:243: no matching function for call to `IvrPython::cancel()'
make[4]: *** [Ivr.o] Error 1
make[4]: Leaving directory `/root/answer_machine/plug-in/ivr'
make[3]: [all] Error 2 (ignored)
make[3]: Leaving directory `/root/answer_machine/plug-in/ivr'
regards,
shirley
Hi Marian,
Thank you for your reply.
I am using the nathelper+RTPproxy, the PSTN gateway i am forward is using
another IP address for the media(rtp).
I have tried in rtpproxy -2fv -l address1/address2, t_relay_to_udp(RTP
Address) also is not working. Any suggestions. Thanks.
Regards,
Shirley
> -----Original Message-----
> From: Marian Dumitru [SMTP:marian.dumitru@voice-sistem.ro]
> Sent: Tuesday, November 16, 2004 4:20 PM
> To: Shirley Toh
> Cc: Serusers (E-mail)
> Subject: Re: [Serusers] Different RTP Server...HELP
>
> Hi Shirley,
>
> This kind of changes have no kind of effect on SER - SER does nor handle
> the media part(excepting when you use nathelper+RTPproxy). So, I think
> the problem is not SER related. Probably you should do some network
> dumps of the signalling messages and check if the IP addresses in SDP
> part are correct.
>
> Best regards,
> Marian
>
> Shirley Toh wrote:
> > Hi,
> >
> > I have problem, my PSTN gateway is using different IP addresses for IP
> > signalling and Media(RTP) signalling.
> > When we make calls, the phone rings and calls is connected but no audio.
> > Please advice what can be done. Thanks.
> >
> > regards,
> > shir
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers(a)lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
>
>
> --
> Voice Sistem
> http://www.voice-sistem.ro
Dear MR:
I install apache_1.3.33 + MySql 5,0 + PHP 4.3.9 in my Linux then run SERWEB
on my http server.
When I login SerWeb http://192.168.5.2/serweb/html/admin/index.php
that show
Warning: mysql_pconnect(): Host '192.168.5.2' is not allowed to connect to this MySQL server in /usr/local/apache2/htdocs/serweb/phplib/db_mysql.inc on line 73
Database error: pconnect(192.168.5.2, root, $Password) failed.
MySQL Error: ()
Session halted.
How do I solve this problem.
Regard
hi,
i have problem with latest version... see bellow...
version: ser 0.8.99-dev15
Nov 16 09:22:59 malignux /usr/local/sbin/ser[14609]: error:
mediaproxy/getContactURI(): error parsing Contact body
Nov 16 09:22:59 malignux /usr/local/sbin/ser[14609]: error:
mediaproxy/getContactURI(): error parsing Contact body
Nov 16 09:23:00 malignux /usr/local/sbin/ser[14609]: val2str()
Destination buffer too short
Nov 16 09:23:00 malignux /usr/local/sbin/ser[14609]: print_values():
Error while converting value to string
Nov 16 09:23:00 malignux /usr/local/sbin/ser[14609]: submit_query():
Column count doesn't match value count at row 1
Nov 16 09:23:00 malignux /usr/local/sbin/ser[14609]: mysql::insert_row
(): Error while submitting query
Nov 16 09:23:00 malignux /usr/local/sbin/ser[14609]: db_insert_ucontact
(): Error while inserting contact
Nov 16 09:23:00 malignux /usr/local/sbin/ser[14609]: insert_ucontact():
Error while inserting in database
Nov 16 09:23:00 malignux /usr/local/sbin/ser[14609]: insert(): Error
while inserting contact
Nov 16 09:23:00 malignux /usr/local/sbin/ser[14609]: contacts(): Error
while inserting record
Nov 16 09:23:00 malignux /usr/local/sbin/ser[14609]: error:
mediaproxy/getContactURI(): error parsing Contact body
Best regards, pedro
Hi,
I have problem, my PSTN gateway is using different IP addresses for IP
signalling and Media(RTP) signalling.
When we make calls, the phone rings and calls is connected but no audio.
Please advice what can be done. Thanks.
regards,
shir
Hi,
I am having registration problems using Pingtel's
xpressa with SER. Has anyone tried this combination
before? X-lite seems to work fine with SER.
Thank you,
DK
__________________________________
Do you Yahoo!?
The all-new My Yahoo! - Get yours free!
http://my.yahoo.com