sr-users June 2004

sr-users@lists.kamailio.org

176 participants
387 discussions

[Serusers] Turn off forking in SER?
by bert 24 Jun '04

24 Jun '04

Is there a known problem with forking=no in the ser.cfg script? I When I set forking to "no", I cannot get SER to start using "service ser start". I am on Fedora1.9, and using SER 0.8.12 (i386/linux) Thanks. Bert Berlin

2 1

[Serusers] Problem in MySql Setup::
by Vanita Jain 24 Jun '04

24 Jun '04

Hi, I have downloaded MySql server. Have downloaded serMySql rpm. When try to install the package following err comes:: [root@localhost /]# rpm -i ser-mysql-0.8.12-0.i386.rpm error: Failed dependencies: libmysqlclient.so.10 is needed by ser-mysql-0.8.12-0 Also when I try to execute the script ser-mysql.sh ":No such file or directory" error comes. What to do??? Thanks - Vanita Jain

2 1

[Serusers] running ser as different user
by Igor Cahoj 24 Jun '04

24 Jun '04

Hello My question is whether it is possible to run ser as different user not root. Igor

2 1

[Serusers] Call routing Problems ser->asterisk->ser with NATed UAs
by Kai Militzer 24 Jun '04

24 Jun '04

Hello everybody! I've been trying for three days to acomplish the following scenario with ser, asterisk and SIP NATed UAs and somehow didn't get any further. What I want in the end is the following. A call from an UA (with the extension 8002) to let's say the extension 98001 comes into ser, from there it is routed to asterisk, which does something (read: record the message for the archives), rewrites the destination and sends it back to ser. With rewriting I mean stripping of the first digit, in this case the 9, so it calls the 8001 on ser. 8001 is a registered UA behind a NAT. The problem i now have is, that the calles extension 8002 rings, but if I answer the call, I have no sound. I'm sure this does something have to do with the NATed UAs and the rtp-Stream, but I can't figure out what exactely it is. I'm sure I have something to do with the nathelper module and rtpproxy on the ser machine, but I haven't found any documentation where it tells me how to exactelly do it. What is strange is the fact, that if I forward a call only to asterisk (for example to a voicemail), without routing it back to ser, I have sound in both directions, meaning I can hear the anouncements of the vm and record a message. If anybody can help me by pointing me in the right direction (RTFMs are fine for me, as long as I got told where to read) I would appreceate it very much. If you need some more information (e.g. ser configurations, etc.), I will happily supply them. Thanks in advance for any help. Best regards Kai

2 1

[Serusers] ENUM parsing error?
by Kerker Staffan 24 Jun '04

24 Jun '04

Hi! I'm having a problem with the ENUM module in SER. I'm running the "latest" SER 0.8.12 downloaded today. Compiled without any extra flags or settings on a Redhat 9 box. I'm getting "Enum() regexp parse error" when I'm doing a ENUM lookup. I have my own (private network) ENUM domain and I think that everything in DNS is ok. I've set the correct ENUM domain parameters with the 'modparam'. This works when I'm using the Cisco SIP proxy for ENUM lookups, and the request and answer to/from my DNS looks identical as the SER lookup. However, SER failes to parse the expression coming back from DNS while Cisco does it correctly and forwards on. The regular expression I'm getting back is like this: sip+E2U#/^(.*)$/sip:\1@mydomain.com/ where I think that the '\1' paramter should be replaced by the dialed number in this case. This works with the Cisco... The ENUM lookup seems to work ok, but there must be somethng wrong with the answer or with the SER parsing the answser. Since the Cisco is working my guess is that SER is doing something wrong. Could this be the case? Anyone got any clues? What am I doing wrong? best regards, /Staffan Kerker -- Staffan Kerker, KIS Commuications, AerotechTelub m. staffan.kerker(a)aerotechtelub.se c. +46(0)70 539 13 65 -- "Don't get involved in politics man, just play the gig..." /Sgt Floyd, Electric Mayhem Band

2 1

RE: [Serusers] SERWEB-User Login Problems
by kevin＠fullcirclenetworks.net 24 Jun '04

24 Jun '04

I am still having problems with the User Login after fixing the domain names. Anyone have another suggestion? Thanks > -------- Original Message -------- > Subject: Re: [Serusers] SERWEB-User Login Problems > From: "Bill" <admin(a)vci.net> > Date: Wed, June 23, 2004 7:35 am > To: kevin(a)fullcirclenetworks.net > > I had a similar problem where the URL I was using to access SERWEB > wasn't the same as the domain name I was using. I was going to > http://192.168.1.63 but the domain name was something else. So when > someone > would login SERWEB was looking for the domain name of 192.168.1.63. I > was > able to see this by turning on the logging in /etc/my.conf and watching > the > SQL statements in /var/log/mysql.log > > Bill Dunn > > > > ----- Original Message ----- > From: kevin(a)fullcirclenetworks.net > To: serusers(a)lists.iptel.org > Sent: Wednesday, June 23, 2004 9:32 AM > Subject: [Serusers] SERWEB-User Login Problems > > > I have successfully installed the latest SERweb and am able to login > under > admin. The problem I am having now > is that none of my users can login and see their account. I have > checked > all my configurations in php,mysql > and apache but don't see any obvious errors. I have a password for > the > users and they are using the correct > one. I check the error logs and don't see any messages. Has anyone > had a > similar problem? > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] SERWEB packets
by Gala, Dipen 24 Jun '04

24 Jun '04

Guys I have my serweb running and I am trying to sniff the sip packets through ethereal sniffer s/w But to my shock there is no sip traffic. I guess serweb uses TCP instead of UDP bcoz I am seeing tons of TCP traffic. Has any one encountered such thing. Can I change the serweb setting so that I can have UDP instead of TCP. Also if its working on TCP how can I see my sip information.. Also does anyone knows how the hell can I use serweb to make a call I have added users in my phone book But they always show offline, even though they have logged in. If anybody can share his ser.cfg with me for this it will be very nice Thanks Dipen K Gala Fidelity Investments System Company - Telecom Phone: (617) 563-2729 Email: Dipen.Gala(a)FMR.com

2 1

[Serusers] conferencing with SEMS
by Steven Langley 23 Jun '04

23 Jun '04

Hi there I have ser 0.8.12 running on RedHat 9 (installed from RPM). I have also installed sems from the CVS with tag ser_rel_0_8_12. My main reason for installing sems is to support conferencing. I am not that interested in the other plugins at the moment. Now, I understand conceptually how conferencing works. Basically many users (UAs) all dial into the same conference URI and communicate via a "focus" running in a central location (tightly coupled conferencing). My question is how does one create a conference and assign it a URI using ser & sems? I have looked at all the documentation and not sure how to do this. Is there some utility in sems / conferencing plugin which allows one to say "I want to create a new instance of a conference and assign it URI conference1(a)domain.com and create another conference with URI conference2(a)domain.com", etc. Then when users dial one of these conference URIs they will be directed to that conference? Is this how it works and if so how do I do this? I am very new to SIP, Linux and C, so please do not be more technical than necessary. Many thanks Steven __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! http://promotions.yahoo.com/new_mail

3 2

[Serusers] RE : modifying Registrar's code
by Gandhi, Jignesh 23 Jun '04

23 Jun '04

We have a very specific needs in terms of registration. SER will work well for redirect and proxy server but we will need to modify the registration code. Is this possible ? I am speaking of registration code as it relates to mysql querries. thanks,

2 1

RE: [Serusers] Log ?
by Karun Chemudugunta 23 Jun '04

23 Jun '04

You can find these log information in "messages" file in /var/log direcotry in linux. tail -f /var/log/messages Thanks, Karun -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On Behalf Of Gala, Dipen Sent: Wednesday, June 23, 2004 11:13 AM To: serusers(a)lists.iptel.org Subject: [Serusers] Log ? When we use command like Log (1, " request ...same domain") Where is this log stored and how can I see this statement. thanks Dipen K Gala Fidelity Investments System Company - Telecom Phone: (617) 563-2729 Email: Dipen.Gala(a)FMR.com

2 1

← Newer
1
...
7
8
9
10
11
12
13
...
39
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2004