sr-users April 2005

sr-users@lists.kamailio.org

250 participants
697 discussions

by Miquel

Hello, I have a problem with the gateway cisco 1760. I make a capture and the arrive to the gateway but this say me "BAD REQUEST -IP invalid" and I don't what to do My configuration is: Using 1454 out of 29688 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ToIP ! ! username GW password 0 GW ip subnet-zero ! ! ip name-server 172.17.1.20 ! ! isdn switch-type basic-net3 isdn voice-call-failure 0 ! voice call carrier capacity active ! voice class codec 1 ! ip name-server 172.17.1.20 ! ! isdn switch-type basic-net3 isdn voice-call-failure 0 ! voice call carrier capacity active ! voice class codec 1 codec preference 1 g723r63 codec preference 2 g723ar63 codec preference 3 g729br8 codec preference 4 g729r8 codec preference 5 g711alaw codec preference 6 g711ulaw ! ! ! ! ! ! ! ! ! ! ! ! interface FastEthernet0/0 description Line ip address 172.17.1.2 255.255.255.0 speed auto ! ! ! ! ! interface FastEthernet0/0 description Line ip address 172.17.1.2 255.255.255.0 speed auto ! interface BRI0/0 description RDSI 932531082 no ip address isdn switch-type basic-net3 ! interface BRI0/1 description RDSI 932531081 no ip address shutdown isdn switch-type basic-net3 ! ip classless ip route 0.0.0.0 0.0.0.0 172.17.1.1 no ip http server ip pim bidir-enable ! ! ! call rsvp-sync ! voice-port 0/0 compand-type a-law cptone ES no ip http server ip pim bidir-enable ! ! ! call rsvp-sync ! voice-port 0/0 compand-type a-law cptone ES ! voice-port 0/1 compand-type a-law cptone ES ! dial-peer cor custom ! ! ! dial-peer voice 100 pots description 932531081 destination-pattern ......... no digit-strip port 0/0 ! dial-peer voice 200 voip session target sip-server ! sip-ua retry invite 3 retry response 3 retry bye 3 retry cancel 3 ! dial-peer voice 200 voip session target sip-server ! sip-ua retry invite 3 retry response 3 retry bye 3 retry cancel 3 timers trying 1000 sip-server ipv4:172.17.1.20:5060 ! ! line con 0 line aux 0 line vty 0 4 exec-timeout 0 0 login ! ntp clock-period 17179997 ntp server 130.206.42.224 end Thanks. -- Miquel

19 years, 7 months

[Serusers] How to create a Log File?

by antonello

Hi, I want to create a LOG File with the follow information: 1) Source caller and destination called 2) Time spent for connection 3) MAC ADDRESS I use SER with Radius authentication and MySQL. SER is located on a Server and RADIUS+MySQL are located on the other Server. Thanks Pasquale Biafora

19 years, 7 months

[Serusers] text ased username & alias table

by Barry Murphy

Hi, A number of my users have signed up with a text based username rather than a number. If the user logs in to serweb it says their alias is 82000, however every singal user gets assigned this, why is that? 1./ From a hard phone, how would i dial the number trakman ? 2./ How do i assign a unique alias to users ? Thanks Barry

19 years, 7 months

[Serusers] How to create a log file?

by Ing. Pasquale Biafora

19 years, 7 months

[Serusers] Mediaproxy still consuming a lot of RAM resources.

by Ricardo Martinez

Hello Again. A few weeks ago i posted about my mediaproxy consuming RAM resources without releasing it. I upgraded to mediaproxy version 1.2.1 and even i modified my mediaproxy configuration (in ser.cfg) with some recommendation from Paul (Java Rockx). All these efforts were useless, my mediaproxy is still consuming RAM and not releasing it. I made a simple test.. Without SER running i used the rtpgenerator (in the utils directory of mediaproxy) to load the mediaproxy, and this is what i found. At the beggining of my test the "free" command show me this :: Every 1s: free Thu Apr 7 13:50:05 2005 total used free shared buffers cached Mem: 514196 429208 84988 0 73672 217444 -/+ buffers/cache: 138092 376104 Swap: 1044216 0 1044216 84 M free. I run the rtp proxy for about 80 simmultaneus calls. When i finish the rtp sessions i see the output of free command: Every 1s: free Thu Apr 7 13:53:43 2005 total used free shared buffers cached Mem: 514196 437868 76328 0 74952 216288 -/+ buffers/cache: 146628 367568 Swap: 1044216 0 1044216 76 M free. As you can see it seems that the mediaproxy is not releasing the RAM memory. I see the command "top" and this is what i get : PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 26972 root 15 0 12320 12M 2004 S 0.0 2.3 1:02 mediaproxy.py The 2.3% is always increasing. Can someone help me here? Thanks! Ricardo Martinez.-

19 years, 7 months

[Serusers] GATEWAY 1760

by Miquel

19 years, 7 months

[Serusers] Static on calls

by Bruno Oliveira

While running a test call between two machines over here, all we get is static on both sides. Does anyoen have any idea what might be the cause of it? -- []s, Bruno "Niggas" Oliveira Belo Horizonte - MG Msn: n1gg4s(a)gmail.com "Todo o nosso descontentamento por aquilo que nos falta procede da nossa falta de gratidão por aquilo que temos."

19 years, 7 months

[Serusers] GATEWAY 1760 (SIP<--> ISDN)

by Miquel

19 years, 7 months

[Serusers] Static on calls

by Bruno Oliveira

19 years, 7 months

[Serusers] Reloading Configuration

by Freddy Parra

Does ser allow one to reload the configuration without restarting the application? Thanks. Freddy

19 years, 7 months

← Newer
1
...
51
52
53
54
55
56
57
...
70
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2005