sr-users May 2006

sr-users@lists.kamailio.org

195 participants
502 discussions

[Serusers] Problem with ser snapshot 0.10.99-dev35-pa-4.1

by Dave

Hi, I compiled and installed it but I get errors relating to "table version#" when I start ser. I checked and it was complaining about "aliases' table version#. But the "aliases" table is NOT being created by the database creation script. Any suggestions wheter I need the "aliases" table? If yes, where do I get the schema and version # for it? THanks __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

18 years, 3 months

[Users] PDT Module

by Andrew And

In PDT module I look the prefix, and I change or add domain. But doc don´t speak if I have two domains by one prefix, and I need this options. Does some know if I have one prefix to 2 domains, Could I to do parallel fork to domains?

18 years, 3 months

Re: [Serusers] ser: cannot call behind a Nat using rtpproxy

by Americania .it

What should I do? Something to set ? Why if I use the asterisk server instead of the ser one and the same voip clients (using users with the nat flag enabled) I can enstablish the communication without any problem ? Should I open port 8000 on the router of the Lan ? I 've attached the X-Lite Log when logging in : --------------------- © 2005 CounterPath Solutions Inc. All rights reserved. X-Lite release 1105x build stamp 21407 License key: B608ADE2A7C14E53835E7FF2EFAE95D0 Established SIP protocol listen on: 192.168.0.102:5060 NAT firewall type discovered is forced. Discovered Symmetric NAT Firewall SIP: 192.168.0.102:5060 RTP: 192.168.0.102:8000 NAT: 62.101.126.230 PROXY#0: 80.105.2.110:5060 SEND TIME: 1079327 SEND >> 80.105.2.110:5060 REGISTER sip:80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 62.101.126.230:5060;rport;branch=z9hG4bK01C14B200F494466A016FE0E0E46B658 From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 To: claudio <sip:claudio@80.105.2.110> Contact: "claudio" <sip:claudio@62.101.126.230:5060> Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 CSeq: 9157 REGISTER Expires: 1800 Max-Forwards: 70 User-Agent: X-Lite release 1105x Content-Length: 0 RECEIVE TIME: 1079425 RECEIVE << 80.105.2.110:5060 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 62.101.126.230:5060;rport=39914;branch=z9hG4bK01C14B200F494466A016FE0E0E46B658 From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 To: claudio <sip:claudio@80.105.2.110>;tag=2a08c327b8d597781b526eaf86695180.4235 Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 CSeq: 9157 REGISTER WWW-Authenticate: Digest realm="80.105.2.110", nonce="446f5b8ae893e0b8c2a781a06a5257a485ebe0b6" Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=39914 in_uri=sip:80.105.2.110 out_uri=sip:80.105.2.110 via_cnt==1" SEND TIME: 1079427 SEND >> 80.105.2.110:5060 REGISTER sip:80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 62.101.126.230:5060;rport;branch=z9hG4bKF82CE6FE2C624791B7ABF06D7B8E7BFD From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 To: claudio <sip:claudio@80.105.2.110> Contact: "claudio" <sip:claudio@62.101.126.230:5060> Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 CSeq: 9158 REGISTER Expires: 1800 Authorization: Digest username="claudio",realm="80.105.2.110",nonce="446f5b8ae893e0b8c2a781a06a5257a485ebe0b6",response="91b05be86378bf515209116e96bd6314",uri="sip:80.105.2.110" Max-Forwards: 70 User-Agent: X-Lite release 1105x Content-Length: 0 RECEIVE TIME: 1079533 RECEIVE << 80.105.2.110:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 62.101.126.230:5060;rport=39914;branch=z9hG4bKF82CE6FE2C624791B7ABF06D7B8E7BFD From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 To: claudio <sip:claudio@80.105.2.110>;tag=2a08c327b8d597781b526eaf86695180.d540 Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 CSeq: 9158 REGISTER Contact: <sip:claudio@62.101.126.230:5060>;expires=1800 Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=39914 in_uri=sip:80.105.2.110 out_uri=sip:80.105.2.110 via_cnt==1" --------------------------------------- > >Hi, >probably the solution might be that your user agent in public will have to >re-register every minute or shorter time. >It is because the NAT binding between SER and the public user will be >closed if there is no SIP traffic. > >Ladislav > >Americania .it wrote: >>I've installed ser 0.9.4 on Suse 10 and it's running with mysql. >> >>I can register users (I'm using serweb) but I can only make a call from a >>user inside the Lan (where ser is installed) to a user outside behind a >>Nat (Fastweb network in Italy, Natted). If i call from this user behind >>Nat the call does not reach the other user. Viceversa it works fine. >> >>I installed the nathelper module and rtpproxy too. >> >>I don't know if I configured it well . Have I got to open some additional >>port in my router on the lan where ser is running (I opened port 5060 udp >>and tcp only)? >> >>I've tried to use Asterix on another pc in the same lan and I don't have >>this kind of problems with the some users and some clients (3cx phone). >> >>Any suggestions ? >> >>thanks >> >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >> >

18 years, 4 months

[Serusers] ser: cannot call behind a Nat using rtpproxy

by Americania .it

I've installed ser 0.9.4 on Suse 10 and it's running with mysql. I can register users (I'm using serweb) but I can only make a call from a user inside the Lan (where ser is installed) to a user outside behind a Nat (Fastweb network in Italy, Natted). If i call from this user behind Nat the call does not reach the other user. Viceversa it works fine. I installed the nathelper module and rtpproxy too. I don't know if I configured it well . Have I got to open some additional port in my router on the lan where ser is running (I opened port 5060 udp and tcp only)? I've tried to use Asterix on another pc in the same lan and I don't have this kind of problems with the some users and some clients (3cx phone). Any suggestions ? thanks

18 years, 4 months

[Serusers] Registering users please help

by ravi reddy

HI Friends, Yesterday I had given a public ip to my linux box and trying to test calls .so, in order to register the users i made the command serctl ul add <username/userid> <username@domain> like this i had added two of my friends names to the location table , but i asked one of my friend to download xten softphone and make configure but i cannot see his registration request and also he tried to make call in xten to another person it is showing call not approved both of my friends are behind NAT , but i used mediaproxy to run along with ser mediaproxy.so module and in ser.cfg it also shows that mediaproxy is from /var/run/mediaproxysocket . there is socket really exists in /var/run. And my mediaproxy is running on ip:port 81.21.33.35:25060 and i dont know whats going wrong Can any body please help me in making test calls , using media proxy Thanks in advance. With regards, Ravi.

18 years, 4 months

[Users] Fork and ENUM

by Andrew And

Could I do forking in Openser when I am usinging ENUM?

18 years, 4 months

[Serusers] lookup-only for calling party in subscriber or alias-table

by Thorsten Müller

Hi all, is there a command in ser comparable to "lookup("<table>")" for the called party for the calling party? I would like to now if the calling party is already registered/known(alias-table) at my ser without lancing an authorization procedure with *_authorize("<realm>","<table>"). Thanks Thorsten ___________________________________________________________ Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de

18 years, 4 months

[Serusers] Radius and Multiple INVITE-ACK

by Nhadie

Hi All, I'm having problem using on sql logging i'm having multiple INV - ACK for a single call, if i use radius accounting, would I still have the same problem? I mean at Radius it's Start and Stop, will it have a mutiple Start? TIA Regards, Nhadie ________________________________________________ Message sent using UebiMiau 2.7

18 years, 4 months

[Serusers] Warining messages

by luke.2.pilgrim＠bt.com

Hi all, I recieve the following warning messages when loadinf up ser: WARNING: fix_socket_list: could not rev. resolve xxx.xxx.xxx.xxx Is this something to worry about? Also I am able to connect to ser internally but not via it's external address. I have rtpproxy installed and I'm using the nathelper module. Not sure if they are configured correctly but they seem to be running. My client is behing NAT but my server is publically available. Does anyone have any ideas or could you tell me the best way to debug? for example can I moniter registration requests coming in? Regards, Luke.

18 years, 4 months

[Users] /etc/init.d doesn't work

by Ty Manthey

I just did a removal of 0.9.5 and installed 1.0.1 for RH from RPM. My problem is that the /etc/init.d doesn't work. I get errors for lines 63, 69, 105 : -start-stop-daemon command not found. This is a debian command? Should this also work for RH? Docs also say sample /etc/init.d config file should be at /usr/local/src/openser-1.0.1/sip-server/etc/openser.init ,but /usr/local/src is empty. whereis openser only returns a config file and a folder with modules. I searched the internet but can't find a posting of a working script, just references to the script.

18 years, 4 months

← Newer
1
...
18
19
20
21
22
23
24
...
51
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2006