sr-users May 2006

sr-users@lists.kamailio.org

195 participants
502 discussions

by Andrey Kouprianov

Guys, hi! Where can I download mediaproxy and RTPProxy tar balls??? I see that RTPPRoxy download from Portaone's site was discontinued? And I did not find a single link for mediaproxy either (though it should be downloadable from iptel.org, is that right?) Eagerly waiting for your reply. Anyone's reply.... Andrey.

18 years, 3 months

[Users] ACK is sent before the re-INVITE to OpenSER, but the proxy relays the re-INVITE first (call flow in the body).

by Alexandre Abreu

Hello. Below it's the call flow. UAC CALL CONTROL 1 OPENSER 1 GW | | | | | INVITE F1 | | | |--------------->| | | | 100 F2 | | | |<---------------| INVITE F3 | | | |--------------->| | | | 100 F4 | | | |<---------------| INVITE F5 | | | |--------------->| | | | 183 F6 | | | 183 F7 |<---------------| | 183 F8 |<---------------| | |<---------------| | | | | Early Media | | |<==============>|<===============|================| | | | 200 F9 | | | 200 F10 |<---------------| | |<---------------| | | | | | | | ACK F13 | | | |--------------->| | | | re-INVITE F14 | | | |--------------->| | | | | re-INVITE F15 | | | |--------------->| | | | ACK F16 | | | |--------------->| | | | | | | | 500 F17 | | | | <--------------| | | | | The problem is between F13 and F16. Why OPENSER relays the re-INVITE first (F15), if the ACK (F13) was sent before and arrives before? And I am sure that this ACK hits a t_relay(), because after the re-INVITE sent, the ACK (F16) is sent normally... I am using OpenSER 1.0.1. Any help is appreciated. Alexandre

18 years, 3 months

[Users] Information to learn OpenSER and SIP

by Manuel Ángel Rubio Jiménez

Hi, i'd like learn more about SIP and OpenSER, but i don't found information about OpenSER with MediaProxy, how works OpenSER with RADIUS (by example) and other things. I don't like HOW-TO, i don't need know how to install anything, i need understand how works each component (openser, radius, mediaproxy...) and some about SIP and RTP. Regards. -- Manuel A. Rubio "Bombadil" Usuario de GNU/Linux #323628 acorde a http://counter.li.org/ GPG ID 1C84979D ftp://bosqueviejo.net/pub/bombadil.asc Técnico en Admin. Sistemas Informáticos

18 years, 3 months

[Users] Database AVP

by Douglas Garstang

Can someone post/link to some examples of how to use avp module to write/read data to/from MySQL tables? The openser.org docs are reeeeealy bad. Doug.

18 years, 3 months

[Users] more outbound proxies/openser & one register/*

by Peter Hudec

hi all, I haven't found so far any suitable solution for my problem. I want to have more outbound proxies and only one register. Outbound proxies should be also RTP proxy for clients /for all, or only behind NAT, it doesn't matter/ My idea is, that the REGISTER server see the IP of the outbound proxy, not the UA it self. Insipired by siporxd and milkfish project I wrote a patch for nathelper to rewrite the contacnat addres to IP of the proxy. If the proxy receives REGISTER, it save the contact and send new to to register with it IP. The signalinig is working good. But I have problem with RTP streams and the SDP part of the INVITE request. If you try to call between two proxies, the RTP goes PROXY1<->REGISTER<->PROXY2, instead of only between PROXY1<->PROXY2. Also if you made a call between 2 phone on the same proxy, the call passes through REGISTER ;( The example openser/nathelper configuration is working good, if the proxy is also register ;) I have atteached my own. Can anyone just a bit help me with configuration or give me a link to the another sip proxy project, which can satisfy my needs ? best regards Peter Hudec -- Things are easier than they appear; all you need is the right focus Leonardo Balliache # # $Id: nathelper.cfg,v 1.1.2.1 2003/11/24 14:47:18 janakj Exp $ # # simple quick-start config script including nathelper support # This default script includes nathelper support. To make it work # you will also have to install Maxim's RTP proxy. The proxy is enforced # if one of the parties is behind a NAT. # # If you have an endpoing in the public internet which is known to # support symmetric RTP (Cisco PSTN gateway or voicemail, for example), # then you don't have to force RTP proxy. If you don't want to enforce # RTP proxy for some destinations than simply use t_relay() instead of # route(1) # # Sections marked with !! Nathelper contain modifications for nathelper # # NOTE !! This config is EXPERIMENTAL ! # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/openser/lib/openser/modules/sl.so" loadmodule "/usr/local/openser/lib/openser/modules/tm.so" loadmodule "/usr/local/openser/lib/openser/modules/rr.so" loadmodule "/usr/local/openser/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/openser/lib/openser/modules/usrloc.so" loadmodule "/usr/local/openser/lib/openser/modules/registrar.so" loadmodule "/usr/local/openser/lib/openser/modules/textops.so" loadmodule "/usr/local/openser/lib/openser/modules/nathelper.so" loadmodule "/usr/local/openser/lib/openser/modules/mysql.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("usrloc", "db_mode", 1) modparam("rr", "enable_full_lr", 1) # !! Nathelper modparam("registrar", "nat_flag", 6) modparam("registrar", "sip_natping_flag", 7) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:22222") modparam("nathelper", "sipping_from", "sip:pinger@voip.swan.sk") modparam("nathelper", "sipping_method", "OPTIONS") # ------------------------- request routing logic ------------------- # main routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); return(0); }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); return(0); }; if (method=="REGISTER") { if (uri==myself) { sl_send_reply("403", "This is PROXY, you can't register here!"); return(0); } else { if (nat_uac_test("3")) { setflag(6); fix_nated_register(); } setflag(7); force_rport(); save_noreply("location"); fix_nated_contact("62.152.225.27"); route(1); } return(0); } if (nat_uac_test("3")) { if (uri==myself) { if (!lookup("location")) { sl_send_reply("404", "Not Found"); return(0); } } else { if (!lookup("location")) { fix_nated_contact("62.152.225.27"); if (method=="INVITE") { setflag(5); force_rtp_proxy(); } } else { fix_nated_contact("62.152.225.27"); if (method=="INVITE") { setflag(5); force_rtp_proxy(); } } force_rport(); t_on_reply("1"); } } else { if (uri==myself) { if (lookup("location")) { if (method=="INVITE") { setflag(5); force_rtp_proxy(); } force_rport(); t_on_reply("1"); } else { sl_send_reply("404", "Not Found"); return(0); } } } route(1); return(0); } route[1] { if (!t_relay()) { sl_reply_error(); }; return(0); } onreply_route[1] { if (nat_uac_test("3")) { fix_nated_contact("62.152.225.27"); if (isflagset(5) && status =~ "(183)|2[0-9][0-9]") { force_rtp_proxy(); } } else { if (isflagset(5) && status =~ "(183)|2[0-9][0-9]") { force_rtp_proxy(); } } force_rport(); }

18 years, 3 months

[Users] Problem with RPID

by Bogomolov Andrei

I use radius authorize reply to set AVP rpid value: 0(30405) DEBUG:auth_radius:radius_authorize_sterman: Success 0(30405) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225 0(30405) DEBUG:auth_radius:extract_avp: string is <rpid:9284444> 0(30405) DEBUG:auth_radius:extract_avp: AVP name is <rpid> 0(30405) DEBUG:auth_radius:extract_avp: AVP val is <9284444> 0(30405) DEBUG:auth_radius:generate_avps: AVP 'rpid'/0='9284444'/0 has been added But when this caller is invating, openser writes to log: 0(30405) append_rpid_hf: No rpid AVP The question is: where are SIP-AVPs stored? Do I have to load auth_db in openser.cfg? Or avps could be stored in RAM without mysql database?

18 years, 3 months

[Users] asterisk and openser - CallerID

by Paul Cupis

Hi all, I'm having some trouble integrating openser with asterisk. I am able to make/receive calls PSTN<>asterisk<>OpenSER<>SIP-client fine, and the SIP client received the PSTN callers CallerID, but I cannot get the SIP-originated call to present a useful CLI to the PSTN recipient. FWIW, I have been able to set the CallerID manually from AGI scripts and the like, and it works from IAX<>asterisk<>PSTN. In openser.cfg I have: # Append Remote-Party-ID header field xlog( "L_INFO", "appending rpid" ); append_rpid_hf("", ";party=calling;id-type=subscriber;screen=no"); and I can see the RPID header in the SIP traffic. In sip.conf I have: [openser] type=friend context=from-openser host=<hidden> insecure=very trustrpid=yes amaflags=billing We are using asterisk 1.0.7 atm and openser 1.0.1 with MySQL backend. I've tried setting the rpid field in openser.subscriber to various settings but it is not making it to the PSTN recipient. Any ideas/gotchas with this sort of setup, or any further information required?

18 years, 3 months

[Users] Overwrite "From:" HF

by Bogomolov Andrei

Is it possible to overwrite "From:" HF on Invitation depending on RPID AVP? Our VOIP gateway does not support Remote-Party-ID header field.

18 years, 3 months

[Serusers] help me in serweb

by ravi reddy

Hello All, I have been trying to run this serweb since 4 days but i am getting different errors and i follwed so many e-mails from our community but still it doesnt work Iam using fedora 4 and ser 0.9.6 and i want to install serweb as followed by the docs but iam getting some errors like favicon.ico file missing some thing and i keep changing all the settings and at last now iam totally confused i installed my serweb in directory /var/www/ and in serweb there is one html directory and i moved it to the directory /var/www/html as told in the docs sip.aarnet.edu But when i typed this url:http://192.168.0.76/serweb Iam getting all list of directories and when i typed http://192.168.0.76/serweb/admin/index.php no message nothing a white blank page bullshit i dont understand what is happening here i changed my settings in /etc/httpd.conf ,and /etc/php.ini but,no use can any body please help me to get out of this work and to move forward thanks in advance :-) regards, Ravi.

18 years, 3 months

[Users] Overwrite "From:" header

by Bogomolov Andrei

Is it possible to overwrite "From:" header on Invitation depending on RPID AVP?

18 years, 3 months

← Newer
1
...
35
36
37
38
39
40
41
...
51
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2006