sr-users May 2012

sr-users@lists.kamailio.org

84 participants
141 discussions

Start a nNew thread

un-suscribe
by Davis Doe 17 May '12

17 May '12

Please i would not like to receive mail from the kamailio group thanks davis

1 0

Setting up siremis 2.0
by pranjal deka 17 May '12

17 May '12

Hi, I have a sip registrar.(kamailio server installed in one server) I want to use the siremis 2.0 to collect management information from the sip registrar. Can you guide me how to make the connection between the sip registrar and the siremis so that the stats can be collected? Thanks

1 0

How to use Async module of Kamailio
by 罗俊明 17 May '12

17 May '12

1 0

Re: [SR-Users] How does RLS work with kamailio.
by Gnaneshwar Gatla 17 May '12

17 May '12

Hello, I have partly fixed this, I was using an incorrect xml format and missing usage of pua module. It took a little more than debugging to find this out. Now I have run into this new issue. I have implemented a presence + rls + xcap server: When client subscribes for RLS, kamailio Notifies with resourcelist for the client. The pua within the server does backend subscribtions. These backend subscribtions are responded with 202 Accepted replies. When the resources in the contact list change … [View More]their presence information the pua generates NOTIFIY with subscription state: pending. Rls module does not reply back. Kamailio does not return from the following command. if(is_method("NOTIFY")) { xlog("handle notify"); rls_handle_notify(); xlog("notify was handled"); exit; }; Thank you for looking into this. Regards Gnani From: Gnaneshwar Gatla Sent: Thursday, April 19, 2012 4:53 PM To: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List Cc: Cody Herzog Subject: How does RLS work with kamailio. Hello, I'm trying to implement RLS with integrated XCAP server. I have successfully run the Kamailio instance with the following snippet. Since I had no RLS clients available, I have tried to test this with SIPp. The attached pcap trace is the result. Test: 1. Send an XCAP signal over http to Kamailio. 2. Register and subscribe Kamailio. The test does store the xml received over http in the xcap table in the database. But rls module does not store the data neither in rls_presentity or rls_watcher. When I sent the Subscribe with sipp, the server throws error that subscription was not found in the database. I would like to know if I'm doing something wrong to implement this service. Is there any brief tutorial on how to implement this? Kamailio.cfg snippet: ##Presence modparam("presence", "server_address", PRESENCE_IP) modparam("presence", "clean_period", 65) modparam("presence", "db_update_period", 60) modparam("presence", "max_expires", 75) modparam("presence", "fallback2db", 1) modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 0) modparam("presence_xml", "integrated_xcap_server", 1) ##rls modparams modparam("rls", "db_url", DBURL) modparam("rls", "waitn_time", 10) modparam("rls", "integrated_xcap_server", 1) modparam("rls", "max_notify_body_length", 32000) modparam("rls", "to_presence_code", 10) modparam("rls", "server_address", RLS_URI) modparam("rls", "outbound_proxy", PUA_OUTBOUND_PROXY) modparam("rls", "xcap_root", XCAP_ROOT) ##XCAP modparams modparam("xcap_server", "db_url", DBURL) modparam("xcap_client", "db_url", DBURL) modparam("xcap_client", "query_period", 50) route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { $var(ret_code)= rls_handle_subscribe(); xlog("Subscribe: $var(ret_code)"); if($var(ret_code)== 10) handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } In the [xhttp:request]: switch($rm) { case "PUT": xcaps_put("$var(uri)", "$hu", "$rb"); if($xcapuri(u=>auid)=~"pres-rules") { xlog("===== xhttp put: refreshing watchers for $var(uri)\n"); pres_update_watchers("$var(uri)", "presence"); pres_refresh_watchers("$var(uri)", "presence", 1); } else if ($xcapuri(u=>auid)=~"resource-lists" || $xcapuri(u=>auid)=~"rls-services") { xlog("==== xhttp put: refreshing rls watchers $var(uri)\n"); rls_update_subs("$var(uri)", "presence"); } exit; break; Gnaneshwar Gatla | InTouch Health | Software Developer 6330 Hollister Ave. Goleta CA, 93117 | P: 805.562.8686 ext: 199 [View Less]

1 0

Re: [SR-Users] kamailio Crashes with rls module
by Gnaneshwar Gatla 17 May '12

17 May '12

Oppsie.. forgot to attach the document. Gnaneshwar Gatla | InTouch Health | Software Developer 6330 Hollister Ave. Goleta CA, 93117 | P: 805.562.8686 ext: 199 From: Gnaneshwar Gatla Sent: Thursday, April 26, 2012 2:14 PM To: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List Subject: kamailio Crashes with rls module Hello, I'm experimenting the usage of rls module with Kamailio. I have been able to successfully update xcap documents on Kamailio XCAP server. I … [View More]

2 6

TLS performance testing
by Kristian Kielhofner 16 May '12

16 May '12

Hello everyone, I'm doing some TLS performance testing on Kamailio 3.2.1. Here's my setup: kamailio -V version: kamailio 3.2.1 (x86_64/linux) 31c991 flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, USE_STUN, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, … [View More]MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 31c991 compiled on 19:38:03 Dec 20 2011 with gcc 4.4.6 uname -a Linux null.null.com 2.6.32-220.el6.x86_64 #1 SMP Tue Dec 6 19:48:22 GMT 2011 x86_64 x86_64 x86_64 GNU/Linux CentOS 6.2 on a Dell PowerEdge R610 with 24 Intel X5650 Cores at 2.67GHz and 12GB of RAM (I could use more). Kamailio is the default config with a few changes: - WITH_TLS defined - TLS is using self-generated CAs/certs (essentially openvpn easy-rsa) with 1024 bit key size - TLS is *not* configured to verify client OR server certs by default - I'm using TLS v1 (SSL 3.1) - TLS cipher suites are set to any (although my simulated UAs only offer AES 256+SHA) - Various changes to Kamailio children (up to 256 at times) and memory sizes (up to 2048mb and even 4096mb at times) - One DNS based alias added - Maximum TCP connections increased to 65000 - Kamailio is configured to only listen on tested IP (UDP, TCP, TLS sockets active) - Syslog has been configured to log local0 (Kamailio) asynchronously My test rig/call generator is an Ixia Xcellon-Ultra NP load module with IXLoad. My call scenario does the following: - Registers two simulated user agents (100000, 200000) to Kamailio with TLS - Places call from 100000 to 200000 via Kamailio with TLS - Increments both user agents by 1 and continues as quickly (cps) as I like up to a channel limit (also configurable) - The Ixia generates a valid SDP but no RTP is generated (although that's certainly possible at these call levels) Two 1 gig ports on the Ixia are connected to the Broadcom NICs on the Dell R610 via a Cisco Catalyst 4948 switch. One port on the Ixia emulates the 100000 agents (A leg) and the other emulates the 200000 agents (B leg). Of course I can provide more information if needed. Here are some test numbers: With TLS at 20cps, 120 sec calls, up to a total of 2470 calls (4940 registrations) life is good. Very good - call setup time averages 23ms, the cps rate holds indefinitely, and not a single call or registration fails over long term tests. UDP and TCP numbers are excellent (bordering ridiculous) - usually around 500cps with practically no reasonable upper limit on simultaneous calls. This doesn't need any further discussion :). The TLS numbers start falling apart pretty quickly after 20cps, however. If I change the TLS test to 40cps, 120 sec calls, up to a total of 4940 calls (9,880 registrations) Kamailio starts to (seriously) struggle. The rate starts fluctuating all over the place, call setup time averages jump to 8000ms (or more) and things just generally get ugly. Interestingly enough all of the user agents are able to register, the logs look fine (to my eye at this log level) and the system (CPU, network, etc) doesn't appear to be under stress at all. I have a few questions: 1) Is there something obviously wrong or stupid I'm doing here? 2) Why are the TLS tests so much worse than TCP and UDP? Am I missing something here? Thanks (in advance) for any advice anyone might be able to offer! -- Kristian Kielhofner [View Less]

3 10

Re: [SR-Users] FW: (Devel) Segmentation fault using pua_dialoginfo
by Marius Zbihlei 16 May '12

16 May '12

On 05/16/2012 03:02 PM, Charles Chance wrote: >>> >>> Currently testing devel version and experiencing the following when >>> using pua_dialoginfo: >>> >>> ------------------------------------- >>> >>> Program terminated with signal 11, Segmentation fault. >>> >>> #0 core_hash (t=0xb3d7e330, type=1024, ps=0xbfcc31c8) at >>> ../../hashes.h:279 >>> >>> 279 v=(*p<&… [View More]

2 1

Re: [SR-Users] FW: (Devel) Segmentation fault using pua_dialoginfo
by Daniel-Constantin Mierla 16 May '12

16 May '12

Hello, hmm, hentity is null even a check for its value is done above ... Is this reproducible or happens from time to time? What are the values you set for $avp(s:puburis_caller) and $avp(s:puburis_callee)? Can you try without parameters: modparam("pua_dialoginfo", "use_pubruri_avps", 1) modparam("pua_dialoginfo", "pubruri_caller_avp", "$avp(s:puburis_caller)") modparam("pua_dialoginfo", "pubruri_callee_avp", "$avp(s:puburis_callee)") These were added by a recent contribution, I want to … [View More]see if they are the reason. Cheers, Daniel On 5/16/12 12:00 AM, Charles Chance wrote: > > Hi Daniel, > > I tried to check that already, but it's not there: > > (gdb) frame 1 > > #1 publ_cback_func (t=0xb3d7e330, type=1024, ps=0xbfcc31c8) > > at send_publish.c:246 > > 246 hash_code= core_hash(hentity->pres_uri, NULL, HASH_SIZE); > > (gdb) p *hentity > > Cannot access memory at address 0x0 > > Config parameters are: > > modparam("pua", "db_url", "mysql://user:pass@xx.xx.xx.xxx/dbname") > > modparam("pua", "db_table", "kam_pua") > > modparam("pua_dialoginfo", "caller_confirmed", 1) > > modparam("pua_dialoginfo", "include_localremote", 0) > > modparam("pua_dialoginfo", "override_lifetime", 300) > > modparam("pua_dialoginfo", "use_pubruri_avps", 1) > > modparam("pua_dialoginfo", "pubruri_caller_avp", "$avp(s:puburis_caller)") > > modparam("pua_dialoginfo", "pubruri_callee_avp", "$avp(s:puburis_callee)") > > Cheers, > > Charles > > ------------------------------------------------------------------------ > > *From:*Daniel-Constantin Mierla [mailto:miconda@gmail.com] > *Sent:* 15 May 2012 21:58 > *To:* Charles Chance > *Cc:* 'SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) > -Users Mailing List' > *Subject:* Re: FW: (Devel) Segmentation fault using pua_dialoginfo > > Hello, > > interesting that the output of bt shows inline core_hash function > prototype with same parameters as publ_cback_func, not being able to > spot eventual wrong parameter values. > > Anyhow, in the gdb, can you do the commands: > > frame 1 > p *hentity > > and send the output? Let's see the value of the pub uri for which > hashing function crashes. > > What are the parameters for pua and pua_dialog info you set in the > config file? > > Cheers, > Daniel > > On 5/15/12 11:53 AM, Charles Chance wrote: > >> Hi Daniel, >> >> As per your previous reply (sorry, I deleted it accidentally), please >> find attached output of 'bt full' as requested. >> >> Best regards and thanks again, >> >> Charles >> >> ------------------------------------------------------------------------ >> >> *From:*Charles Chance [mailto:charles.chance@sipcentric.com] >> *Sent:* 13 May 2012 11:21 >> *To:* 'SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) >> -Users Mailing List' >> *Subject:* (Devel) Segmentation fault using pua_dialoginfo >> >> Hi, >> >> Currently testing devel version and experiencing the following when >> using pua_dialoginfo: >> >> ------------------------------------- >> >> Program terminated with signal 11, Segmentation fault. >> >> #0 core_hash (t=0xb3d7e330, type=1024, ps=0xbfcc31c8) at >> ../../hashes.h:279 >> >> 279 v=(*p<<24)+(p[1]<<16)+(p[2]<<8)+p[3]; >> >> (gdb) bt >> >> #0 core_hash (t=0xb3d7e330, type=1024, ps=0xbfcc31c8) at >> ../../hashes.h:279 >> >> #1 publ_cback_func (t=0xb3d7e330, type=1024, ps=0xbfcc31c8) at >> send_publish.c:246 >> >> #2 0x002861d6 in run_trans_callbacks_internal (cb_lst=0xb3d7e370, >> type=1024, trans=0xb3d7e330, params=0xbfcc31c8) at t_hooks.c:290 >> >> #3 0x002864d6 in run_trans_callbacks (type=1024, trans=0x200, >> req=0x0, rpl=0xb7bea008, code=200) at t_hooks.c:317 >> >> #4 0x002afb28 in local_reply (t=0xb3d7e330, p_msg=0xb7bea008, >> branch=0, msg_status=200, cancel_data=0xbfcc345c) at t_reply.c:2001 >> >> #5 0x002b2b45 in reply_received (p_msg=0xb7bea008) at t_reply.c:2350 >> >> #6 0x0809d5f4 in forward_reply (msg=0xb7bea008) at forward.c:790 >> >> #7 0x080e11a9 in receive_msg ( >> >> buf=0x82c4fa0 "SIP/2.0 200 OK\r\nVia: SIP/2.0/UDP >> xx.xx.xx.xxx;branch=z9hG4bKc13b.25313b6.0\r\nTo: >> sip:000094@xx.xx.xx.xxx;tag=03373b1b433b65504ea28bd3d9e6db76.d7f2\r\nFrom >> <sip:000094@xx.xx.xx.xxx;tag=03373b1b433b65504ea28bd3d9e6db76.d7f2%5Cr%5CnFrom>: >> sip:000094@xx.xx.xx.xxx;tag=4cc17c2c75cb82fa"..., len=393, >> rcv_info=0xbfcc3648) at receive.c:270 >> >> #8 0x0817801b in udp_rcv_loop () at udp_server.c:544 >> >> #9 0x080b0426 in main_loop () at main.c:1633 >> >> #10 0x080b3d02 in main (argc=11, argv=0xbfcc3924) at main.c:2546 >> >> (gdb) up >> >> #1 publ_cback_func (t=0xb3d7e330, type=1024, ps=0xbfcc31c8) at >> send_publish.c:246 >> >> 246 hash_code= core_hash(hentity->pres_uri, NULL, HASH_SIZE); >> >> (gdb) p hentity->pres_uri >> >> Cannot access memory at address 0x8 >> >> (gdb) p *hentity >> >> Cannot access memory at address 0x0 >> >> ------------------------------------- >> >> Your time is greatly appreciated... >> >> Charles >> > > > -- > Daniel-Constantin Mierla -http://www.asipto.com > http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda > > ------------------------------------------------------------------------ > > No virus found in this message. > Checked by AVG - www.avg.com <http://www.avg.com> > Version: 2012.0.2171 / Virus Database: 2425/5000 - Release Date: 05/15/12 > -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda [View Less]

2 1

db_cluster module
by Uri Shacked 16 May '12

16 May '12

Hi, can the db_cluster module be used to all DB connections? if today i set for example "modparam("dialplan", db_url", DBURL)" i will be able to use "modparam("dialplan", db_url", CLUSTER)" ? still, on the #!define DBURL "mysql://.........." i can not use clustering right? BR, Uri

2 1

Re: [SR-Users] Siremis install fail at last page of web install--Solved
by Magnus 16 May '12

16 May '12

Just in case anyone comes up with same issue - post solving the directory/file ownership and repeating the import of db files - Siremis came up as it should Sorry for noise. -----Original Message----- From: Magnus Sent: Tuesday, May 15, 2012 4:35 PM To: sr-users(a)lists.sip-router.org Subject: RE: Siremis install fail at last page of web install "can't open cmp file to write " in the httpd error log I get two lines " mkdir(): No such file or directory in /var/www/html/siremis-3.2.0/… [View More]

2 1

← Newer
1
...
4
5
6
7
8
9
10
...
15
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2012