sr-users

sr-users@lists.kamailio.org

9 participants
37392 discussions

Incoming DID calls routing to subscriber
by Jose N Figueroa 22 Oct '20

22 Oct '20

Hello everybody, I'm trying to route incoming calls to kamailio with specific subscriber but I can't make it working. The complete scenario is: SoftSwith -> kamailio 5.3 -> zoiper What i'm trying to do is to receive a call into the zoiper when I dial specific DID which is already coming into the kamailio. It goes until the routing from kamilio to the subscriber account but it keeps in INVITE command, no response from the subscriber. Any help would be great! This is what I've been trying but no luck yet: if($rdir(name)=="downstream") { xlog("DID request was incoming call, called number: $rU caller_id: $fU and source_ip $si \n"); $sht(rtpProxy=>mip_$ci)=1; # We should take the called_number as username in table # Also validate if the number has active that DID, balance if needed, etc. # route(validate_customer); # I know, hardcoded for testing sql_xquery("ca", "select * from location where username = 1212 ", "ra"); $avp(location_addr) = $xavp(ra=>received); xlog("DID did_incoming location is $xavp(ra=>received) \n"); # Validate SIP OK #setflag(SIP_IP_OK); #$rU=$avp(dnis); #$rd=$avp(identity); #$rp=$avp(port); # uac_replace_to($xavp(ra=>contact)); uac_replace_to("sip:1212@voip.x.net:5060"); # $ru = $var(duri); $ru=$xavp(ra=>contact); $ru="sip:1212@voip.x.net:5060"; route(RELAY); # t_on_failure("dst_failure"); # t_on_reply("dst_reply"); if(!t_relay()) { sl_reply_error(); exit; } exit; } -- Regards, Jose N Figueroa

3 3

Load balance on HA scenario
by Duarte Rocha 21 Oct '20

21 Oct '20

Greetings, I have two machines with Kamailio in a HA setup with replicated DB. For simplicity let's say each machine has one HA IP and that IP can jump to the other machine in case something happens (kamailio stopping, etc). I'm using Dispatcher with load balance configuration. I have Dispatcher configured so that each peer has one instance for socket with HA IP 1 and HA IP 2. In order for this to work correctly on the load balance scenario I must disable via RPC command the peer which has the socket that doesn't belong to the machine. I also must do it every time the IP jumps back and forth, which adds complexety to my system. Does Dispatcher has any sort of help on this? It could not include peers with sockets IPs that don't belong to the machine in the destination set, for example. Is this possible? I could also work with failover support but i would rather avoid having so many failovers. Best Regards,A

3 8

kamailio RTP Engine in kubernetes pods
by Pavithra Mohanraja 21 Oct '20

21 Oct '20

Hi, I have installed rtp engine inside pcscf pod and tried to make a call. caller was unable to reach the pod environment with 2223 port exposed for rtp. Kindly anyone help, if you have already done with pod based deployment of ims. Thanks, Pavithra

4 7

Kamailio + rtpengine
by Amit Pal 21 Oct '20

21 Oct '20

Hi, I have using kamailio with rtpengine, I have started rtpengine session (rtpengine_offer() /rtpengine_answer() )only when call getting hold and then play media file and on un hold detach rtpengine session(rtpengine_delete()). during this activity I have received the log "No supported output codec found in SDP" from rtpengine. And getting silence on other leg. Above activity log are attach in mail. if we do same step again (i.e. hold/unhold) in same call then second leg listening the file perfectly and rtpengine working fine vice-versa. I want to know , what else missing to configure here. Pls guide me to get out this. Regards Amit Pal

2 1

How to read "duid" from dispatcher.list in kamamilio.cfg
by Jani Biju Babjan 21 Oct '20

21 Oct '20

Hi, I have a dispatcher.list file like the following: 1 sip:127.0.0.1:5060 0 0 duid=abcd;maxload=5 1 sip:127.0.0.2:5060 0 0 duid=efgh;maxload=5 After calling the ds_select_dst("1", "4") function(ie, round-robin selection), I want to read the value of the "duid" attribute of the selected destination and then pass it to a database. How can I read this value in the configuration file? Jani Biju Babjan

2 2

Re: [SR-Users] Load balance on HA scenario
by Yufei Tao 21 Oct '20

21 Oct '20

Hi Joel, Thanks for the tip! Having the pings disabled and enable it on HA status being master sounds like a good idea :) Cheers, Yufei

1 0

ERROR: <core> [core/socket_info.c:2225]: parse_protohostport():
by Andy Kama 20 Oct '20

20 Oct '20

I am seeing this error in the logs i am using kamailio 5.4.1 any idea what the cause is? ERROR: <core> [core/socket_info.c:2225]: parse_protohostport(): bad protocol in sip:myp:5060

2 4

Re: [SR-Users] Load balance on HA scenario
by Yufei Tao 20 Oct '20

20 Oct '20

Hi Duarte, Not sure if I understand it correctly but are you trying to set up an HA pair of dispatchers? If so I am doing it differently in that, I use the Virtual/floating IP (VIP) as socket. This way the master node (which has got the VIP) can send OPTIONs pings out fine but the backup node won't be able to send. Functionally it is fine, but the backup node keeps logging errors because it doesn't have the VIP: ERROR: <core> [core/udp_server.c:599]: udp_send(): sendto(sock, buf: 0x7f0e6b54e2e0, len: 372, 0, dst: (192.168.213.143:5060), tolen: 16) - err: Network is unreachable (101) ERROR: tm [../../core/forward.h:231]: msg_send_buffer(): udp_send failed When FO happens, the backup node becomes master and takes the VIP, and it functions correctly. But I haven't worked out how to avoid the ERROR loggings on the backup node. Maybe someone else has any better ideas/suggestions? Cheers, Yufei

2 1

No retry on INVITE
by Allan Kristensen 20 Oct '20

20 Oct '20

Hello, I'm trying to get Kamailio to retry INVITE. We have a Freeswitch which is sending INVITE to a sip user via Kamailio proxy using static ip/location. All is well, calls are flowing, but sometimes INVITE from kamailio to user is lost and no attempt to retry is occurring and so after 30 sec kamailio just returns 408 Request timeout. Call flow is like this: FS Kamailio User --- INVITE --> <-- 100 Trying --- INVITE ---> (Waiting 30 secs) <-- 408 Timeout --- ACK ---> So assume we have failed in handling retries somehow. Kamailio is running stateless, but other retries are working, so I assume this is not a problem? Can someone perhaps point us in the right direction on where to solve this? Kamailio is version 5.2.4 Thank you... /Allan

3 4

Re: [SR-Users] SRTP
by Yufei Tao 20 Oct '20

20 Oct '20

Hi, Like Olle said RTPEngine is perfectly capable of handling one leg in RTP the other in SRTP. When looking up RTPEngine's documentation, may be worth checking these out: SRTP SDES-unencrypted_srtp SDES-unencrypted_srtcp SDES-unauthenticated_srtp e.g. try apply these flags to rtpengin_offer() on the incoming RTP leg, to get RTPEngine to add encryption to the outgoing leg etc. Cheers, Yufei

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users