[Serusers] SER+SERWEB - sr-users

22 Apr 2004


      hi all,
Here is my ser.cfg. I try  to use send IM, missed calls and voicemail
but i can't debug my ser.cfg
problems with route[2] and acc module in my ser.cfg.
Anybody could help me to understand  ?
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no	# (cmd line: -E)
/* Uncomment these lines to enter debugging mode 
debug=9
fork=yes
log_stderror=yes
*/
check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
listen=192.168.0.1
children=4
fifo="/tmp/ser_fifo"
fifo_mode=0666
#alias="example.com"
# ------------------ module:wq loading
----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/acc.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/domain.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
loadmodule "/usr/lib/ser/modules/msilo.so"
loadmodule "/usr/lib/ser/modules/vm.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode",   0)
# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("usrloc", "db_mode", 1)
#modparam("usrloc", "use_domain", 1)
# --register params--
modparam("registrar", "use_domain", 1)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this
config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# --domain module--
modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("domain", "db_mode", 1)
modparam("domain", "domain_table", "domain")
modparam("domain", "domain_col", "domain")
# --msilo params--
modparam("msilo", "registrar", "sip:registrar@example.com")
modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser")
# --vm params--
modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser")
# --acc params--
#modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
#modparam("acc", "db_missed_flag", 3)
# -------------------------  request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
    	sl_send_reply("483","Too Many Hops");
    	break;
    };
    if ( msg:len > max_len ) {
    	sl_send_reply("513", "Message too big");
    	break;
    };
# we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    record_route();	
    # loose-route processing
    if (loose_route()) {
    	t_relay();
    	break;
    };
# if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (is_from_local()) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
    		if (!www_authorize("", "subscriber")) {
    			www_challenge("", "0");
    			break;
    		};
save("location");
    		m_dump();
    		break;
    	};
# native SIP destinations are handled using our USRLOC DB
    	lookup("aliases");
    	if (!lookup("location")) {
if (method == "MESSAGE") {
       				route(2);
    			break;
    			};
if ((method=="INVITE" || method=="ACK") && t_newtran() ) {
          		t_reply("404", "Not Found");
    			route(3);
    		  	break;
        			};
    	
    	};
setflag(3);
        # forward to current uri now; use stateful forwarding; that
        # works reliably even if we forward from TCP to UDP
        t_on_failure("1");	
    # forward to current uri now; use stateful forwarding; that
    # works reliably even if we forward from TCP to UDP
    if (!t_relay()) {
    	sl_reply_error();
    };
}
#route[2] {
    if (method == "MESSAGE") {
       		if (!t_newtran()) {
            		sl_reply_error();
            		break;
        	};
if (m_store("0")) {
            	t_reply("202", "Accepted for Later Delivery");
            	break;
        	};
       	};
}
route[3] {
# non-Voip -- just send "off-line"
    	 if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) {
        		sl_send_reply("404", "Not Found");
        		break;
    		};
    		if (t_newtran()) {
         		t_reply("404", "Not Found");
#            		acc_db_request("404 missed call", "missed_calls");
};
}