Hi,
i tried to change the ds_probing_mode as well. it didn't do any good. i need the probing mode to be set to 1 anyway.
so, any ideas?
here is the cfg again:
after the failure route i turn to this route
"route[OSPRPLERR] { xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); if($avp(OSPRPL)!=404) { xlog("$C(rg) OSPRPL is $avp(OSPRPL)* now disable destination* $C(xx)\n"); ds_mark_dst("AP"); xlog("$C(rg) *after disabling destination* $C(xx)\n"); }"
here is the log:
13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog 13(5760) ERROR: <script>: *after disabling destination*
now i check the dispatcher list status:
kamctl fifo ds_list
SET:: 47 URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 SET:: 41 URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2
Hello,
cn you give output of 'kamailio -V' and the log messages with debug=3 in config file?
Note that from the moment you set the gateway in some state and you dump the list via mi, there can be keepalives that change the state.
Cheers, Daniel
On 12/11/11 3:42 PM, Uri Shacked wrote:
Hi, i tried to change the ds_probing_mode as well. it didn't do any good. i need the probing mode to be set to 1 anyway. so, any ideas? here is the cfg again: after the failure route i turn to this route "route[OSPRPLERR] { xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); if($avp(OSPRPL)!=404) { xlog("$C(rg) OSPRPL is $avp(OSPRPL)*now disable destination* $C(xx)\n"); ds_mark_dst("AP"); xlog("$C(rg) *after disabling destination* $C(xx)\n"); }" here is the log:
13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29 mailto:sip%3A36264529@10.10.21.29 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog 13(5760) ERROR: <script>: *after disabling destination*
now i check the dispatcher list status: kamctl fifo ds_list
SET:: 47 URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 SET:: 41 URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
version :
version: kamailio 3.2.0 (i386/linux) e19bb8 flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: e19bb8 compiled on 18:43:11 Oct 24 2011 with gcc 4.1.2 and with log level 3 : 13(11897) ERROR: <script>: OSPRPL is 408 now disable destination 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1266 a=26 n=ds_mark_dst 13(11897) DEBUG: dispatcher [dispatch.c:1994]: mode [1] grp [47] dst [sip:10.10.21.28] 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1267 a=26 n=xlog 13(11897) ERROR: <script>: after disabling destination
On Mon, Dec 12, 2011 at 11:14 AM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
cn you give output of 'kamailio -V' and the log messages with debug=3 in config file?
Note that from the moment you set the gateway in some state and you dump the list via mi, there can be keepalives that change the state.
Cheers, Daniel
On 12/11/11 3:42 PM, Uri Shacked wrote:
Hi,
i tried to change the ds_probing_mode as well. it didn't do any good. i need the probing mode to be set to 1 anyway.
so, any ideas?
here is the cfg again:
after the failure route i turn to this route
"route[OSPRPLERR] { xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); if($avp(OSPRPL)!=404) { xlog("$C(rg) OSPRPL is $avp(OSPRPL)* now disable destination* $C(xx)\n"); ds_mark_dst("AP"); xlog("$C(rg) *after disabling destination* $C(xx)\n"); }"
here is the log:
13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog 13(5760) ERROR: <script>: *after disabling destination*
now i check the dispatcher list status:
kamctl fifo ds_list
SET:: 47 URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 SET:: 41 URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda -- http://twitter.com/miconda
Hello,
you have to upgrade to 3.2.1 (or use the latest git branch 3.2). The current keepalive mechanism was refactored a bit after the release of 3.2.0, as they were overlapping cases.
Cheers, Daniel
On 12/12/11 11:13 AM, Uri Shacked wrote:
version : version: kamailio 3.2.0 (i386/linux) e19bb8 flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: e19bb8 compiled on 18:43:11 Oct 24 2011 with gcc 4.1.2 and with log level 3 : 13(11897) ERROR: <script>: OSPRPL is 408 now disable destination 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1266 a=26 n=ds_mark_dst 13(11897) DEBUG: dispatcher [dispatch.c:1994]: mode [1] grp [47] dst [sip:10.10.21.28] 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1267 a=26 n=xlog 13(11897) ERROR: <script>: after disabling destination
On Mon, Dec 12, 2011 at 11:14 AM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
Hello, cn you give output of 'kamailio -V' and the log messages with debug=3 in config file? Note that from the moment you set the gateway in some state and you dump the list via mi, there can be keepalives that change the state. Cheers, Daniel On 12/11/11 3:42 PM, Uri Shacked wrote:Hi, i tried to change the ds_probing_mode as well. it didn't do any good. i need the probing mode to be set to 1 anyway. so, any ideas? here is the cfg again: after the failure route i turn to this route "route[OSPRPLERR] { xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); if($avp(OSPRPL)!=404) { xlog("$C(rg) OSPRPL is $avp(OSPRPL)*now disable destination* $C(xx)\n"); ds_mark_dst("AP"); xlog("$C(rg) *after disabling destination* $C(xx)\n"); }" here is the log: 13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29 <mailto:sip%3A36264529@10.10.21.29> 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog 13(5760) ERROR: <script>: *after disabling destination* now i check the dispatcher list status: kamctl fifo ds_list SET:: 47 URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 SET:: 41 URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2 _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/> http://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
thanks,
since i am not so good with linux... :-( sorry.... after doing GIT like :
# git clone –depth 1 git://git.sip-router.org/sip-router kamailio # cd kamailio # git checkout -b 3.2 origin/3.2 # make FLAVOUR=kamailio cfg
what do i do next? make install? On Mon, Dec 12, 2011 at 12:18 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
you have to upgrade to 3.2.1 (or use the latest git branch 3.2). The current keepalive mechanism was refactored a bit after the release of 3.2.0, as they were overlapping cases.
Cheers, Daniel
On 12/12/11 11:13 AM, Uri Shacked wrote:
version :
version: kamailio 3.2.0 (i386/linux) e19bb8 flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: e19bb8 compiled on 18:43:11 Oct 24 2011 with gcc 4.1.2 and with log level 3 : 13(11897) ERROR: <script>: OSPRPL is 408 now disable destination 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1266 a=26 n=ds_mark_dst 13(11897) DEBUG: dispatcher [dispatch.c:1994]: mode [1] grp [47] dst [ sip:10.10.21.28] 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1267 a=26 n=xlog 13(11897) ERROR: <script>: after disabling destination
On Mon, Dec 12, 2011 at 11:14 AM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
cn you give output of 'kamailio -V' and the log messages with debug=3 in config file?
Note that from the moment you set the gateway in some state and you dump the list via mi, there can be keepalives that change the state.
Cheers, Daniel
On 12/11/11 3:42 PM, Uri Shacked wrote:
Hi,
i tried to change the ds_probing_mode as well. it didn't do any good. i need the probing mode to be set to 1 anyway.
so, any ideas?
here is the cfg again:
after the failure route i turn to this route
"route[OSPRPLERR] { xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); if($avp(OSPRPL)!=404) { xlog("$C(rg) OSPRPL is $avp(OSPRPL)* now disable destination*$C(xx)\n"); ds_mark_dst("AP"); xlog("$C(rg) *after disabling destination* $C(xx)\n"); }"
here is the log:
13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog 13(5760) ERROR: <script>: *after disabling destination*
now i check the dispatcher list status:
kamctl fifo ds_list
SET:: 47 URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 SET:: 41 URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda -- http://twitter.com/miconda
Hello,
On 12/12/11 1:35 PM, Uri Shacked wrote:
thanks, since i am not so good with linux... :-( sorry.... after doing GIT like : # git clone –depth 1 git://git.sip-router.org/sip-router http://git.sip-router.org/sip-router kamailio # cd kamailio # git checkout -b 3.2 origin/3.2 # make FLAVOUR=kamailio cfg what do i do next? make install?
yes, make install. You can read a tutorial about installing kamailio 3.2 from git at:
* http://www.kamailio.org/wiki/install/3.2.x/git
Cheers, Daniel
On Mon, Dec 12, 2011 at 12:18 PM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
Hello, you have to upgrade to 3.2.1 (or use the latest git branch 3.2). The current keepalive mechanism was refactored a bit after the release of 3.2.0, as they were overlapping cases. Cheers, Daniel On 12/12/11 11:13 AM, Uri Shacked wrote:version : version: kamailio 3.2.0 (i386/linux) e19bb8 flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: e19bb8 compiled on 18:43:11 Oct 24 2011 with gcc 4.1.2 and with log level 3 : 13(11897) ERROR: <script>: OSPRPL is 408 now disable destination 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1266 a=26 n=ds_mark_dst 13(11897) DEBUG: dispatcher [dispatch.c:1994]: mode [1] grp [47] dst [sip:10.10.21.28] 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1267 a=26 n=xlog 13(11897) ERROR: <script>: after disabling destination On Mon, Dec 12, 2011 at 11:14 AM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote: Hello, cn you give output of 'kamailio -V' and the log messages with debug=3 in config file? Note that from the moment you set the gateway in some state and you dump the list via mi, there can be keepalives that change the state. Cheers, Daniel On 12/11/11 3:42 PM, Uri Shacked wrote:Hi, i tried to change the ds_probing_mode as well. it didn't do any good. i need the probing mode to be set to 1 anyway. so, any ideas? here is the cfg again: after the failure route i turn to this route "route[OSPRPLERR] { xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); if($avp(OSPRPL)!=404) { xlog("$C(rg) OSPRPL is $avp(OSPRPL)*now disable destination* $C(xx)\n"); ds_mark_dst("AP"); xlog("$C(rg) *after disabling destination* $C(xx)\n"); }" here is the log: 13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29 <mailto:sip%3A36264529@10.10.21.29> 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog 13(5760) ERROR: <script>: *after disabling destination* now i check the dispatcher list status: kamctl fifo ds_list SET:: 47 URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 SET:: 41 URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2 _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/> http://linkedin.com/in/miconda -- http://twitter.com/miconda _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/> http://linkedin.com/in/miconda -- http://twitter.com/miconda
I installed with those instructions once... from scratch.... I thought mayby there is a quicker way (like update in windows msi..... :-)) when my system is already configured nicely..
Thanks, I must say i think kamailio is great !! a real SIP application server, perfect for many implementations. Cheers!
On Mon, Dec 12, 2011 at 2:51 PM, Daniel-Constantin Mierla <miconda@gmail.com
wrote:
Hello,
On 12/12/11 1:35 PM, Uri Shacked wrote:
thanks,
since i am not so good with linux... :-( sorry.... after doing GIT like :
# git clone –depth 1 git://git.sip-router.org/sip-router kamailio # cd kamailio # git checkout -b 3.2 origin/3.2 # make FLAVOUR=kamailio cfg
what do i do next? make install?
yes, make install. You can read a tutorial about installing kamailio 3.2 from git at:
Cheers, Daniel
On Mon, Dec 12, 2011 at 12:18 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
you have to upgrade to 3.2.1 (or use the latest git branch 3.2). The current keepalive mechanism was refactored a bit after the release of 3.2.0, as they were overlapping cases.
Cheers, Daniel
On 12/12/11 11:13 AM, Uri Shacked wrote:
version :
version: kamailio 3.2.0 (i386/linux) e19bb8 flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: e19bb8 compiled on 18:43:11 Oct 24 2011 with gcc 4.1.2 and with log level 3 : 13(11897) ERROR: <script>: OSPRPL is 408 now disable destination 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1266 a=26 n=ds_mark_dst 13(11897) DEBUG: dispatcher [dispatch.c:1994]: mode [1] grp [47] dst [ sip:10.10.21.28] 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1267 a=26 n=xlog 13(11897) ERROR: <script>: after disabling destination
On Mon, Dec 12, 2011 at 11:14 AM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
cn you give output of 'kamailio -V' and the log messages with debug=3 in config file?
Note that from the moment you set the gateway in some state and you dump the list via mi, there can be keepalives that change the state.
Cheers, Daniel
On 12/11/11 3:42 PM, Uri Shacked wrote:
Hi,
i tried to change the ds_probing_mode as well. it didn't do any good. i need the probing mode to be set to 1 anyway.
so, any ideas?
here is the cfg again:
after the failure route i turn to this route
"route[OSPRPLERR] { xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); if($avp(OSPRPL)!=404) { xlog("$C(rg) OSPRPL is $avp(OSPRPL)* now disable destination*$C(xx)\n"); ds_mark_dst("AP"); xlog("$C(rg) *after disabling destination* $C(xx)\n"); }"
here is the log:
13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog 13(5760) ERROR: <script>: *after disabling destination*
now i check the dispatcher list status:
kamctl fifo ds_list
SET:: 47 URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 SET:: 41 URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda -- http://twitter.com/miconda
-- Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda -- http://twitter.com/miconda
Hello,
On 12/12/11 7:38 PM, Uri Shacked wrote:
I installed with those instructions once... from scratch.... I thought mayby there is a quicker way (like update in windows msi..... :-)) when my system is already configured nicely..
it is even better than windo$. For example, if you use debian (or ubuntu), just set the apt repository to our debs server where we have nighlty builds, see this page:
* http://www.kamailio.org/wiki/packages/debs
The you do:
apt-get install kamailio kamailio-mysql-modules ...
Whenever you need upgrade, just do:
apt-get update apt-get upgrade
The better part is that the uninstall really works and you don't get trojans/viruses.
Cheers, Daniel
Thanks, I must say i think kamailio is great !! a real SIP application server, perfect for many implementations. Cheers!
On Mon, Dec 12, 2011 at 2:51 PM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
Hello, On 12/12/11 1:35 PM, Uri Shacked wrote:thanks, since i am not so good with linux... :-( sorry.... after doing GIT like : # git clone --depth 1 git://git.sip-router.org/sip-router <http://git.sip-router.org/sip-router> kamailio # cd kamailio # git checkout -b 3.2 origin/3.2 # make FLAVOUR=kamailio cfg what do i do next? make install?yes, make install. You can read a tutorial about installing kamailio 3.2 from git at: * http://www.kamailio.org/wiki/install/3.2.x/git Cheers, DanielOn Mon, Dec 12, 2011 at 12:18 PM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote: Hello, you have to upgrade to 3.2.1 (or use the latest git branch 3.2). The current keepalive mechanism was refactored a bit after the release of 3.2.0, as they were overlapping cases. Cheers, Daniel On 12/12/11 11:13 AM, Uri Shacked wrote:version : version: kamailio 3.2.0 (i386/linux) e19bb8 flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: e19bb8 compiled on 18:43:11 Oct 24 2011 with gcc 4.1.2 and with log level 3 : 13(11897) ERROR: <script>: OSPRPL is 408 now disable destination 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1266 a=26 n=ds_mark_dst 13(11897) DEBUG: dispatcher [dispatch.c:1994]: mode [1] grp [47] dst [sip:10.10.21.28] 13(11897) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1267 a=26 n=xlog 13(11897) ERROR: <script>: after disabling destination On Mon, Dec 12, 2011 at 11:14 AM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote: Hello, cn you give output of 'kamailio -V' and the log messages with debug=3 in config file? Note that from the moment you set the gateway in some state and you dump the list via mi, there can be keepalives that change the state. Cheers, Daniel On 12/11/11 3:42 PM, Uri Shacked wrote:Hi, i tried to change the ds_probing_mode as well. it didn't do any good. i need the probing mode to be set to 1 anyway. so, any ideas? here is the cfg again: after the failure route i turn to this route "route[OSPRPLERR] { xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); if($avp(OSPRPL)!=404) { xlog("$C(rg) OSPRPL is $avp(OSPRPL)*now disable destination* $C(xx)\n"); ds_mark_dst("AP"); xlog("$C(rg) *after disabling destination* $C(xx)\n"); }" here is the log: 13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29 <mailto:sip%3A36264529@10.10.21.29> 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog 13(5760) ERROR: <script>: *after disabling destination* now i check the dispatcher list status: kamctl fifo ds_list SET:: 47 URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 SET:: 41 URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2 _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/> http://linkedin.com/in/miconda -- http://twitter.com/miconda _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/> http://linkedin.com/in/miconda -- http://twitter.com/miconda-- Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/> http://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Daniel-Constantin Mierla -
Uri Shacked