22 Jan
2010
22 Jan
'10
12:04 p.m.
Hello Klaus,
thank you very much! I really appreciate your help!
I followed your instructions and I hope that the attached file includes the
necessary informations.
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 10:50
An: Andreas Rehbein
Betreff: Re: AW: [SR-Users] TLS problems
Andreas Rehbein schrieb:
Hi Klaus!
Yes, the crash happens everytime (and immediately) when I push the
"Register"-Button in snoms web-gui.
I attached the backtrace-file, but until now I did not rebuild kamailio
with
-DDBG_QM_MALLOC. Please let me know if it's
necessary.
the log only shows the last function call. Please start gdb again and at
the gdb prompt generate a backtrace by entering bt, e.g:
(gdb) bt
regards
klaus
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 09:35
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: [SR-Users] TLS problems
Hi Andreas!
Maybe this is the same bug I reported yesterday. Unfortunately I can not
reproduce the crash anymore.
Does the crash happen everytime?
Kamailio produced a core dump:
fd=8
0(6257) ALERT: <core> [main.c:725]: core
was generated
So please send a the backtrace:
# gdb kamailio /path/to/corefile
bt
Location of the core file is usually / or /tmp or the kamailio's working
directory. Use
# cat /proc/sys/kernel/core_pattern
to find the exact location of the core dump.
Further, it might be useful to enable memory debugging:
- in Makefile.defs use -DDBG_QM_MALLOC instead of -DF_MALLOC and
rebuild/reinstall kamailio
- set higher loglevels in kamailio.cfg
memlog=3
memdbg=3
debug=3
modparam("tls", "tls_log", 3)
Note: this excessive logging makes kamailio start/stop real slow and
logfile will increase rapidly (might fill up your hard disk)
regards
klaus
Andreas Rehbein schrieb:
Hi,
Ive installed Kamailio 3.0 on RHEL5 and activated the mysql backend and
tls support. Everything works fine with Soft User Agent Phoner lite.
My Problem is: If I try to register a snom 370 Kamailio crashes
immediatly. What is wrong? Any suggestions?
Debug:
17(6290) DEBUG: <core> [ip_addr.c:116]: tcpconn_new: new tcp connection:
192.168.0.222
17(6290) DEBUG: <core> [tcp_main.c:1052]: tcpconn_new: on port 1430, type
3
> 17(6290) DEBUG: <core> [tcp_main.c:1351]: tcpconn_add: hashes:
> 978:1690:1400, 1
>
> 17(6290) DEBUG: <core> [io_wait.h:361]: DBG: io_watch_add(0x8222fe0, 31,
> 2, 0xb613a2b8), fd_no=24
>
> 17(6290) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8222fe0,
> 31, -1, 0x0) fd_no=25 called
>
> 17(6290) DEBUG: <core> [tcp_main.c:3627]: tcp: DBG: sendig to child,
> events 1
>
> 17(6290) DEBUG: <core> [tcp_main.c:3336]: send2child: to tcp child 0
> 13(6283), 0xb613a2b8
>
> 13(6283) DEBUG: <core> [tcp_read.c:884]: received n=4 con=0xb613a2b8,
13(6283) DEBUG: tls [tls_server.c:109]: Using TLS domain TLSs<default>
17(6290) DEBUG: <core> [tcp_main.c:2826]: DBG: handle_tcp_child: dead
tcp child 0 (pid 6283, no 13) (shutting down?)
17(6290) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8222fe0,
24, -1, 0x0) fd_no=24 called
17(6290) : <core> [pass_fd.c:283]: ERROR: receive_fd: EOF on 4
17(6290) DEBUG: <core> [tcp_main.c:3038]: DBG: handle_ser_child: dead
child 13, pid 6283 (shutting down?)
17(6290) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8222fe0, 4,
-1, 0x0) fd_no=23 called
0(6257) ALERT: <core> [main.c:722]: child process 6283 exited by a
signal 11
0(6257) ALERT: <core> [main.c:725]: core was generated
0(6257) INFO: <core> [main.c:737]: INFO: terminating due to SIGCHLD
17(6290) INFO: <core> [main.c:788]: INFO: signal 15 received
15(6286) INFO: <core> [main.c:788]: INFO: signal 15 received
16(6289) INFO: <core> [main.c:788]: INFO: signal 15 received
12(6281) INFO: <core> [main.c:788]: INFO: signal 15 received
14(6285) INFO: <core> [main.c:788]: INFO: signal 15 received
10(6278) INFO: <core> [main.c:788]: INFO: signal 15 received
6(6269) INFO: <core> [main.c:788]: INFO: signal 15 received
2(6261) INFO: <core> [main.c:788]: INFO: signal 15 received
11(6280) INFO: <core> [main.c:788]: INFO: signal 15 received
1(6260) INFO: <core> [main.c:788]: INFO: signal 15 received
9(6276) INFO: <core> [main.c:788]: INFO: signal 15 received
8(6272) INFO: <core> [main.c:788]: INFO: signal 15 received
3(6262) INFO: <core> [main.c:788]: INFO: signal 15 received
7(6270) INFO: <core> [main.c:788]: INFO: signal 15 received
5(6267) INFO: <core> [main.c:788]: INFO: signal 15 received
4(6265) INFO: <core> [main.c:788]: INFO: signal 15 received
0(6257) DEBUG: tm [t_funcs.c:122]: DEBUG: tm_shutdown : start
0(6257) DEBUG: tm [t_funcs.c:125]: DEBUG: tm_shutdown : emptying hash
table
0(6257) DEBUG: tm [t_funcs.c:127]: DEBUG:
tm_shutdown : removing
semaphores
> 0(6257) DEBUG: tm [t_funcs.c:129]: DEBUG: tm_shutdown : destroying tmcb
> lists
>
> 0(6257) DEBUG: tm [t_funcs.c:132]: DEBUG: tm_shutdown : done
>
> 0(6257) DEBUG: tls [tls_init.c:621]: tls module final tls destroy
>
> 0(6257) DEBUG: <core> [mem/shm_mem.c:236]: shm_mem_destroy
>
> 0(6257) DEBUG: <core> [mem/shm_mem.c:239]: destroying the shared memory
> lock
>
> 0(6257) DEBUG: <core> [main.c:741]: terminating due to SIGCHLD
>
>
>
> tia
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> sr-users mailing list
> sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users 
22 Jan
22 Jan
12:28 p.m.
New subject: TLS problems
This is a different crash than the one I had.
which Linux version and which openssl version do you use?
regards
klaus
Andreas Rehbein schrieb:
Hello Klaus,
thank you very much! I really appreciate your help!
I followed your instructions and I hope that the attached file includes the
necessary informations.
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 10:50
An: Andreas Rehbein
Betreff: Re: AW: [SR-Users] TLS problems
Andreas Rehbein schrieb:
Hi Klaus!
Yes, the crash happens everytime (and immediately) when I push the
"Register"-Button in snoms web-gui.
I attached the backtrace-file, but until now I did not rebuild kamailio
with
-DDBG_QM_MALLOC. Please let me know if it's
necessary.
the log only shows the last function call. Please start gdb again and at
the gdb prompt generate a backtrace by entering bt, e.g:
(gdb) bt
regards
klaus
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 09:35
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: [SR-Users] TLS problems
Hi Andreas!
Maybe this is the same bug I reported yesterday. Unfortunately I can not
reproduce the crash anymore.
Does the crash happen everytime?
Kamailio produced a core dump:
fd=8
>> 13(6283) DEBUG: tls [tls_server.c:109]: Using TLS domain TLSs<default>
>>
>> 17(6290) DEBUG: <core> [tcp_main.c:2826]: DBG: handle_tcp_child: dead
>> tcp child 0 (pid 6283, no 13) (shutting down?)
>>
>> 17(6290) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8222fe0,
>> 24, -1, 0x0) fd_no=24 called
>>
>> 17(6290) : <core> [pass_fd.c:283]: ERROR: receive_fd: EOF on 4
>>
>> 17(6290) DEBUG: <core> [tcp_main.c:3038]: DBG: handle_ser_child: dead
>> child 13, pid 6283 (shutting down?)
>>
>> 17(6290) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8222fe0, 4,
>> -1, 0x0) fd_no=23 called
>>
>> 0(6257) ALERT: <core> [main.c:722]: child process 6283 exited by a
>> signal 11
>>
>> 0(6257) ALERT: <core> [main.c:725]: core was generated
>>
>> 0(6257) INFO: <core> [main.c:737]: INFO: terminating due to SIGCHLD
>>
>> 17(6290) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 15(6286) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 16(6289) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 12(6281) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 14(6285) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 10(6278) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 6(6269) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 2(6261) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 11(6280) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 1(6260) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 9(6276) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 8(6272) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 3(6262) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 7(6270) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 5(6267) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 4(6265) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 0(6257) DEBUG: tm [t_funcs.c:122]: DEBUG: tm_shutdown : start
>>
>> 0(6257) DEBUG: tm [t_funcs.c:125]: DEBUG: tm_shutdown : emptying hash
> table
>> 0(6257) DEBUG: tm [t_funcs.c:127]: DEBUG: tm_shutdown : removing
> semaphores
>> 0(6257) DEBUG: tm [t_funcs.c:129]: DEBUG: tm_shutdown : destroying tmcb
>> lists
>>
>> 0(6257) DEBUG: tm [t_funcs.c:132]: DEBUG: tm_shutdown : done
>>
>> 0(6257) DEBUG: tls [tls_init.c:621]: tls module final tls destroy
>>
>> 0(6257) DEBUG: <core> [mem/shm_mem.c:236]: shm_mem_destroy
>>
>> 0(6257) DEBUG: <core> [mem/shm_mem.c:239]: destroying the shared memory
>> lock
>>
>> 0(6257) DEBUG: <core> [main.c:741]: terminating due to SIGCHLD
>>
>>
>>
>> tia
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> sr-users mailing list
>> sr-users(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users 0(6257) ALERT: <core> [main.c:725]: core
was generated
So please send a the backtrace:
# gdb kamailio /path/to/corefile
bt
Location of the core file is usually / or /tmp or the kamailio's working
directory. Use
# cat /proc/sys/kernel/core_pattern
to find the exact location of the core dump.
Further, it might be useful to enable memory debugging:
- in Makefile.defs use -DDBG_QM_MALLOC instead of -DF_MALLOC and
rebuild/reinstall kamailio
- set higher loglevels in kamailio.cfg
memlog=3
memdbg=3
debug=3
modparam("tls", "tls_log", 3)
Note: this excessive logging makes kamailio start/stop real slow and
logfile will increase rapidly (might fill up your hard disk)
regards
klaus
Andreas Rehbein schrieb:
Hi,
I’ve installed Kamailio 3.0 on RHEL5 and activated the mysql backend and
tls support. Everything works fine with Soft User Agent „Phoner lite“.
My Problem is: If I try to register a „snom 370“ Kamailio crashes
immediatly. What is wrong? Any suggestions?
Debug:
17(6290) DEBUG: <core> [ip_addr.c:116]: tcpconn_new: new tcp connection:
192.168.0.222
17(6290) DEBUG: <core> [tcp_main.c:1052]: tcpconn_new: on port 1430, type
3
> 17(6290) DEBUG: <core> [tcp_main.c:1351]: tcpconn_add: hashes:
> 978:1690:1400, 1
>
> 17(6290) DEBUG: <core> [io_wait.h:361]: DBG: io_watch_add(0x8222fe0, 31,
> 2, 0xb613a2b8), fd_no=24
>
> 17(6290) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8222fe0,
> 31, -1, 0x0) fd_no=25 called
>
> 17(6290) DEBUG: <core> [tcp_main.c:3627]: tcp: DBG: sendig to child,
> events 1
>
> 17(6290) DEBUG: <core> [tcp_main.c:3336]: send2child: to tcp child 0
> 13(6283), 0xb613a2b8
>
> 13(6283) DEBUG: <core> [tcp_read.c:884]: received n=4 con=0xb613a2b8,
12:35 p.m.
New subject: TLS problems
Hello Klaus,
Linux: Red Hat Enterprise Linux 5; Kernel: 2.6.18-92.1.10.el5
OpenSSL: OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 11:29
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: [SR-Users] TLS problems
This is a different crash than the one I had.
which Linux version and which openssl version do you use?
regards
klaus
Andreas Rehbein schrieb:
Hello Klaus,
thank you very much! I really appreciate your help!
I followed your instructions and I hope that the attached file includes
the
necessary informations.
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 10:50
An: Andreas Rehbein
Betreff: Re: AW: [SR-Users] TLS problems
Andreas Rehbein schrieb:
Hi Klaus!
Yes, the crash happens everytime (and immediately) when I push the
"Register"-Button in snoms web-gui.
I attached the backtrace-file, but until now I did not rebuild kamailio
with
-DDBG_QM_MALLOC. Please let me know if it's
necessary.
the log only shows the last function call. Please start gdb again and at
the gdb prompt generate a backtrace by entering bt, e.g:
(gdb) bt
regards
klaus
> regards
> Andreas
>
> -----Ursprüngliche Nachricht-----
> Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
> Gesendet: Freitag, 22. Januar 2010 09:35
> An: Andreas Rehbein
> Cc: sr-users(a)lists.sip-router.org
> Betreff: Re: [SR-Users] TLS problems
>
> Hi Andreas!
>
> Maybe this is the same bug I reported yesterday. Unfortunately I can not
> reproduce the crash anymore.
>
> Does the crash happen everytime?
>
> Kamailio produced a core dump:
> > 0(6257) ALERT: <core> [main.c:725]: core was generated
>
> So please send a the backtrace:
> # gdb kamailio /path/to/corefile
> > bt
>
> Location of the core file is usually / or /tmp or the kamailio's working
> directory. Use
> # cat /proc/sys/kernel/core_pattern
> to find the exact location of the core dump.
>
> Further, it might be useful to enable memory debugging:
> - in Makefile.defs use -DDBG_QM_MALLOC instead of -DF_MALLOC and
> rebuild/reinstall kamailio
> - set higher loglevels in kamailio.cfg
> memlog=3
> memdbg=3
> debug=3
> modparam("tls", "tls_log", 3)
>
> Note: this excessive logging makes kamailio start/stop real slow and
> logfile will increase rapidly (might fill up your hard disk)
>
> regards
> klaus
>
>
>
> Andreas Rehbein schrieb:
>> Hi,
>>
>>
>>
>> Ive installed Kamailio 3.0 on RHEL5 and activated the mysql backend and >> tls support. Everything works fine with Soft
User Agent Phoner lite.
>> My Problem is: If I try to register a snom 370 Kamailio crashes
>> immediatly. What is wrong? Any suggestions?
>>
>> Debug:
>>
>> 17(6290) DEBUG: <core> [ip_addr.c:116]: tcpconn_new: new tcp connection:
>> 192.168.0.222
>>
>> 17(6290) DEBUG: <core> [tcp_main.c:1052]: tcpconn_new: on port 1430,
type
> 3
>> 17(6290) DEBUG: <core> [tcp_main.c:1351]: tcpconn_add: hashes:
>> 978:1690:1400, 1
>>
>> 17(6290) DEBUG: <core> [io_wait.h:361]: DBG: io_watch_add(0x8222fe0, 31,
> 2,
0xb613a2b8), fd_no=24
>
> 17(6290) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8222fe0,
> 31, -1, 0x0) fd_no=25 called
>
> 17(6290) DEBUG: <core> [tcp_main.c:3627]: tcp: DBG: sendig to child,
> events 1
>
> 17(6290) DEBUG: <core> [tcp_main.c:3336]: send2child: to tcp child 0
> 13(6283), 0xb613a2b8
>
> 13(6283) DEBUG: <core> [tcp_read.c:884]: received n=4 con=0xb613a2b8,
fd=8
>> 13(6283) DEBUG: tls [tls_server.c:109]: Using TLS domain TLSs<default>
>>
>> 17(6290) DEBUG: <core> [tcp_main.c:2826]: DBG: handle_tcp_child: dead
>> tcp child 0 (pid 6283, no 13) (shutting down?)
>>
>> 17(6290) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8222fe0,
>> 24, -1, 0x0) fd_no=24 called
>>
>> 17(6290) : <core> [pass_fd.c:283]: ERROR: receive_fd: EOF on 4
>>
>> 17(6290) DEBUG: <core> [tcp_main.c:3038]: DBG: handle_ser_child: dead
>> child 13, pid 6283 (shutting down?)
>>
>> 17(6290) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8222fe0, 4,
>> -1, 0x0) fd_no=23 called
>>
>> 0(6257) ALERT: <core> [main.c:722]: child process 6283 exited by a
>> signal 11
>>
>> 0(6257) ALERT: <core> [main.c:725]: core was generated
>>
>> 0(6257) INFO: <core> [main.c:737]: INFO: terminating due to SIGCHLD
>>
>> 17(6290) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 15(6286) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 16(6289) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 12(6281) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 14(6285) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 10(6278) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 6(6269) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 2(6261) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 11(6280) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 1(6260) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 9(6276) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 8(6272) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 3(6262) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 7(6270) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 5(6267) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 4(6265) INFO: <core> [main.c:788]: INFO: signal 15 received
>>
>> 0(6257) DEBUG: tm [t_funcs.c:122]: DEBUG: tm_shutdown : start
>>
>> 0(6257) DEBUG: tm [t_funcs.c:125]: DEBUG: tm_shutdown : emptying hash
> table
>> 0(6257) DEBUG: tm [t_funcs.c:127]: DEBUG: tm_shutdown : removing
> semaphores
>> 0(6257) DEBUG: tm [t_funcs.c:129]: DEBUG: tm_shutdown : destroying tmcb
>> lists
>>
>> 0(6257) DEBUG: tm [t_funcs.c:132]: DEBUG: tm_shutdown : done
>>
>> 0(6257) DEBUG: tls [tls_init.c:621]: tls module final tls destroy
>>
>> 0(6257) DEBUG: <core> [mem/shm_mem.c:236]: shm_mem_destroy
>>
>> 0(6257) DEBUG: <core> [mem/shm_mem.c:239]: destroying the shared memory
>> lock
>>
>> 0(6257) DEBUG: <core> [main.c:741]: terminating due to SIGCHLD
>>
>>
>>
>> tia
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> sr-users mailing list
>> sr-users(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
2:17 p.m.
New subject: TLS problems
Andreas Rehbein schrieb:
Hello Klaus,
Linux: Red Hat Enterprise Linux 5; Kernel: 2.6.18-92.1.10.el5
OpenSSL: OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Hi Andreas!
I fail to configure SNOM to accept the certificate. I imported the CA
cert as trusted certificates, but TLS handshake is not successful. Is
there something else I need to take care of?
I'm quite sure my certificates are OK as it works with eyebeam and QjSimple.
regards
Klaus
2:28 p.m.
New subject: TLS problems
Hi Klaus,
until now (OpenSER 1.3.x without client verification) it was not necessary
to import certs into snom.
To force the snom to send Messages via tls, you need to insert something
like "192.168.0.89:5061;transport=tls" in the outbound proxy field (but I'm
sure you already knew)
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 13:17
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: AW: [SR-Users] TLS problems
Andreas Rehbein schrieb:
Hello Klaus,
Linux: Red Hat Enterprise Linux 5; Kernel: 2.6.18-92.1.10.el5
OpenSSL: OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Hi Andreas!
I fail to configure SNOM to accept the certificate. I imported the CA
cert as trusted certificates, but TLS handshake is not successful. Is
there something else I need to take care of?
I'm quite sure my certificates are OK as it works with eyebeam and QjSimple.
regards
Klaus
5:07 p.m.
New subject: TLS problems
I managed to have SNOM 320 registering at kamailio-3.0 via TLS. But I do
not have any crashes (openssl 0.9.8g-15+lenny6).
Andreas, when does the crash happen exactly: during TLS handshake or
afterwards (you can for example use "ssldump port 5061" to debug the TLS
connection)?
regards
klaus
Andreas Rehbein schrieb:
Hi Klaus,
until now (OpenSER 1.3.x without client verification) it was not necessary
to import certs into snom.
To force the snom to send Messages via tls, you need to insert something
like "192.168.0.89:5061;transport=tls" in the outbound proxy field (but
I'm
sure you already knew)
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 13:17
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: AW: [SR-Users] TLS problems
Andreas Rehbein schrieb:
Hello Klaus,
Linux: Red Hat Enterprise Linux 5; Kernel: 2.6.18-92.1.10.el5
OpenSSL: OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Hi Andreas!
I fail to configure SNOM to accept the certificate. I imported the CA
cert as trusted certificates, but TLS handshake is not successful. Is
there something else I need to take care of?
I'm quite sure my certificates are OK as it works with eyebeam and QjSimple.
regards
Klaus
25 Jan
25 Jan
8:38 a.m.
New subject: TLS problems
Hi Klaus,
this are the ssldump results:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
New TCP connection #1: 192.168.0.222(1619) <-> 192.168.0.89(5061)
1 1 0.2578 (0.2578) C>S Handshake
ClientHello
Version 3.1
cipher suites
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA
TLS_RSA_WITH_NULL_MD5
TLS_RSA_WITH_NULL_SHA
TLS_DH_anon_WITH_3DES_EDE_CBC_SHA
TLS_DH_anon_WITH_RC4_128_MD5
TLS_RSA_WITH_DES_CBC_SHA
TLS_RSA_EXPORT1024_WITH_RC4_56_SHA
TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA
TLS_DH_anon_WITH_DES_CBC_SHA
compression methods
NULL
1 0.4212 (0.1633) S>C TCP FIN
1 0.4225 (0.0013) C>S TCP FIN
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Seems like snom doesn't offer compression methods...
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 16:07
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: AW: AW: [SR-Users] TLS problems
I managed to have SNOM 320 registering at kamailio-3.0 via TLS. But I do
not have any crashes (openssl 0.9.8g-15+lenny6).
Andreas, when does the crash happen exactly: during TLS handshake or
afterwards (you can for example use "ssldump port 5061" to debug the TLS
connection)?
regards
klaus
Andreas Rehbein schrieb:
Hi Klaus,
until now (OpenSER 1.3.x without client verification) it was not necessary
to import certs into snom.
To force the snom to send Messages via tls, you need to insert something
like "192.168.0.89:5061;transport=tls" in the outbound proxy field (but
I'm
sure you already knew)
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 13:17
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: AW: [SR-Users] TLS problems
Andreas Rehbein schrieb:
QjSimple.
Hello Klaus,
Linux: Red Hat Enterprise Linux 5; Kernel: 2.6.18-92.1.10.el5
OpenSSL: OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Hi Andreas!
I fail to configure SNOM to accept the certificate. I imported the CA
cert as trusted certificates, but TLS handshake is not successful. Is
there something else I need to take care of?
I'm quite sure my certificates are OK as it works with eyebeam and
regards
Klaus
10:59 a.m.
New subject: TLS problems
Is this proxy->phone or phone->proxy?
klaus
Andreas Rehbein schrieb:
Hi Klaus,
this are the ssldump results:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
New TCP connection #1: 192.168.0.222(1619) <-> 192.168.0.89(5061)
1 1 0.2578 (0.2578) C>S Handshake
ClientHello
Version 3.1
cipher suites
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA
TLS_RSA_WITH_NULL_MD5
TLS_RSA_WITH_NULL_SHA
TLS_DH_anon_WITH_3DES_EDE_CBC_SHA
TLS_DH_anon_WITH_RC4_128_MD5
TLS_RSA_WITH_DES_CBC_SHA
TLS_RSA_EXPORT1024_WITH_RC4_56_SHA
TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA
TLS_DH_anon_WITH_DES_CBC_SHA
compression methods
NULL
1 0.4212 (0.1633) S>C TCP FIN
1 0.4225 (0.0013) C>S TCP FIN
Seems like snom doesn't offer compression methods...
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 16:07
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: AW: AW: [SR-Users] TLS problems
I managed to have SNOM 320 registering at kamailio-3.0 via TLS. But I do
not have any crashes (openssl 0.9.8g-15+lenny6).
Andreas, when does the crash happen exactly: during TLS handshake or
afterwards (you can for example use "ssldump port 5061" to debug the TLS
connection)?
regards
klaus
Andreas Rehbein schrieb:
Hi Klaus,
until now (OpenSER 1.3.x without client verification) it was not necessary
to import certs into snom.
To force the snom to send Messages via tls, you need to insert something
like "192.168.0.89:5061;transport=tls" in the outbound proxy field (but
I'm
sure you already knew)
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 13:17
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: AW: [SR-Users] TLS problems
Andreas Rehbein schrieb:
QjSimple.
Hello Klaus,
Linux: Red Hat Enterprise Linux 5; Kernel: 2.6.18-92.1.10.el5
OpenSSL: OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Hi Andreas!
I fail to configure SNOM to accept the certificate. I imported the CA
cert as trusted certificates, but TLS handshake is not successful. Is
there something else I need to take care of?
I'm quite sure my certificates are OK as it works with eyebeam and regards
Klaus
11:38 a.m.
New subject: TLS problems
Hi,
this is the phone->proxy case (traced on Proxy 192.168.0.89).
I also traced the successful case (Phoner Lite Register - phone->proxy):
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
New TCP connection #1: 192.168.0.176(1723) <-> 192.168.0.89(5061)
1 1 0.5784 (0.5784) C>S Handshake
ClientHello
Version 3.1
cipher suites
Unknown value 0x39
Unknown value 0x38
Unknown value 0x35
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_3DES_EDE_CBC_SHA
Unknown value 0x33
Unknown value 0x32
Unknown value 0x2f
TLS_RSA_WITH_IDEA_CBC_SHA
TLS_RSA_WITH_RC4_128_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_RSA_WITH_DES_CBC_SHA
TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA
TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA
TLS_RSA_EXPORT_WITH_DES40_CBC_SHA
TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5
TLS_RSA_EXPORT_WITH_RC4_40_MD5
compression methods
NULL
1 2 0.5811 (0.0027) S>C Handshake
ServerHello
Version 3.1
session_id[0]=
cipherSuite Unknown value 0x35
compressionMethod NULL
1 3 0.5811 (0.0000) S>C Handshake
Certificate
1 4 0.5811 (0.0000) S>C Handshake
ServerHelloDone
1 5 0.5830 (0.0019) C>S Handshake
ClientKeyExchange
1 6 0.5830 (0.0000) C>S ChangeCipherSpec
1 7 0.5830 (0.0000) C>S Handshake
1 8 0.5870 (0.0040) S>C ChangeCipherSpec
1 9 0.5870 (0.0000) S>C Handshake
1 10 0.5908 (0.0037) C>S application_data
1 11 0.6204 (0.0296) S>C application_data
1 12 0.6241 (0.0037) C>S application_data
1 13 0.6848 (0.0606) S>C application_data
1 14 0.6884 (0.0035) C>S application_data
1 15 0.6890 (0.0006) S>C application_data
1 16 0.6934 (0.0043) C>S application_data
1 17 0.6947 (0.0013) S>C application_data
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Montag, 25. Januar 2010 09:59
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: AW: AW: AW: [SR-Users] TLS problems
Is this proxy->phone or phone->proxy?
klaus
Andreas Rehbein schrieb:
Hi Klaus,
this are the ssldump results:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
New TCP connection #1: 192.168.0.222(1619) <-> 192.168.0.89(5061)
1 1 0.2578 (0.2578) C>S Handshake
ClientHello
Version 3.1
cipher suites
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA
TLS_RSA_WITH_NULL_MD5
TLS_RSA_WITH_NULL_SHA
TLS_DH_anon_WITH_3DES_EDE_CBC_SHA
TLS_DH_anon_WITH_RC4_128_MD5
TLS_RSA_WITH_DES_CBC_SHA
TLS_RSA_EXPORT1024_WITH_RC4_56_SHA
TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA
TLS_DH_anon_WITH_DES_CBC_SHA
compression methods
NULL
1 0.4212 (0.1633) S>C TCP FIN
1 0.4225 (0.0013) C>S TCP FIN
Seems like snom doesn't offer compression methods...
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 16:07
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: AW: AW: [SR-Users] TLS problems
I managed to have SNOM 320 registering at kamailio-3.0 via TLS. But I do
not have any crashes (openssl 0.9.8g-15+lenny6).
Andreas, when does the crash happen exactly: during TLS handshake or
afterwards (you can for example use "ssldump port 5061" to debug the TLS
connection)?
regards
klaus
Andreas Rehbein schrieb:
> Hi Klaus,
>
> until now (OpenSER 1.3.x without client verification) it was not
necessary
to import
certs into snom.
To force the snom to send Messages via tls, you need to insert something
like "192.168.0.89:5061;transport=tls" in the outbound proxy field (but
I'm
sure you already knew)
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 13:17
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: AW: [SR-Users] TLS problems
Andreas Rehbein schrieb:
QjSimple.
Hello Klaus,
Linux: Red Hat Enterprise Linux 5; Kernel: 2.6.18-92.1.10.el5
OpenSSL: OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Hi Andreas!
I fail to configure SNOM to accept the certificate. I imported the CA
cert as trusted certificates, but TLS handshake is not successful. Is
there something else I need to take care of?
I'm quite sure my certificates are OK as it works with eyebeam and regards
Klaus
29 Jan
29 Jan
6:27 p.m.
New subject: TLS problems
Hello Klaus,
I believe I've run into the same issue here:
0(21444) DEBUG: <core> [main.c:1559]: Expect maximum 2144 open fds
14(21473) DEBUG: <core> [sr_module.c:807]: DEBUG: init_mod_child (10):
mi_fifo
14(21473) DEBUG: <core> [sr_module.c:791]: DEBUG: init_mod_child (10): tm
14(21473) DEBUG: tm [callid.c:131]: DEBUG: callid:
'6b17ba47-21473(a)127.0.0.1'
14(21473) DEBUG: <core> [sr_module.c:807]: DEBUG: init_mod_child (10):
usrloc
14(21473) DEBUG: <core> [sr_module.c:807]: DEBUG: init_mod_child (10):
registrar
14(21473) DEBUG: <core> [sr_module.c:807]: DEBUG: init_mod_child (10):
uri_db
14(21473) DEBUG: <core> [sr_module.c:791]: DEBUG: init_mod_child (10): ctl
14(21473) DEBUG: <core> [sr_module.c:807]: DEBUG: init_mod_child (10): acc
14(21473) DEBUG: <core> [sr_module.c:807]: DEBUG: init_mod_child (10):
auth_db
14(21473) DEBUG: <core> [db.c:294]: connection 0x8292950 found in pool
14(21473) DEBUG: <core> [sr_module.c:807]: DEBUG: init_mod_child (10): tls
14(21473) DEBUG: <core> [local_timer.c:67]: init_local_timer: timer_list
between 0x82393e4 and 0x825b3e4
14(21473) DEBUG: <core> [io_wait.h:361]: DBG: io_watch_add(0x8239220, 28, 1,
(nil)), fd_no=0
17(21476) DEBUG: <core> [ip_addr.c:116]: tcpconn_new: new tcp connection:
192.168.10.106
17(21476) DEBUG: <core> [tcp_main.c:1052]: tcpconn_new: on port 2087, type 3
17(21476) DEBUG: <core> [tcp_main.c:1351]: tcpconn_add: hashes:
201:2583:2549, 1
17(21476) DEBUG: <core> [io_wait.h:361]: DBG: io_watch_add(0x8216fe0, 32, 2,
0xb60eb860), fd_no=24
17(21476) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8216fe0, 32,
-1, 0x0) fd_no=25 called
17(21476) DEBUG: <core> [tcp_main.c:3627]: tcp: DBG: sendig to child, events
1
17(21476) DEBUG: <core> [tcp_main.c:3336]: send2child: to tcp child 0
13(21472), 0xb60eb860
13(21472) DEBUG: <core> [tcp_read.c:884]: received n=4 con=0xb60eb860, fd=7
13(21472) DEBUG: tls [tls_server.c:109]: Using TLS domain TLSs<default>
17(21476) : <core> [pass_fd.c:283]: ERROR: receive_fd: EOF on 4
17(21476) DEBUG: <core> [tcp_main.c:3038]: DBG: handle_ser_child: dead child
13, pid 21472 (shutting down?)
17(21476) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8216fe0, 4,
-1, 0x0) fd_no=24 called
17(21476) DEBUG: <core> [tcp_main.c:2826]: DBG: handle_tcp_child: dead tcp
child 0 (pid 21472, no 13) (shutting down?)
17(21476) DEBUG: <core> [io_wait.h:588]: DBG: io_watch_del (0x8216fe0, 25,
-1, 0x0) fd_no=23 called
0(21444) ALERT: <core> [main.c:722]: child process 21472 exited by a signal
11
0(21444) ALERT: <core> [main.c:725]: core was generated
0(21444) INFO: <core> [main.c:737]: INFO: terminating due to SIGCHLD
17(21476) INFO: <core> [main.c:788]: INFO: signal 15 received
10(21464) INFO: <core> [main.c:788]: INFO: signal 15 received
2(21449) INFO: <core> [main.c:788]: INFO: signal 15 received
1(21448) INFO: <core> [main.c:788]: INFO: signal 15 received
3(21450) INFO: <core> [main.c:788]: INFO: signal 15 received
4(21451) INFO: <core> [main.c:788]: INFO: signal 15 received
16(21475) INFO: <core> [main.c:788]: INFO: signal 15 received
15(21474) INFO: <core> [main.c:788]: INFO: signal 15 received
14(21473) INFO: <core> [main.c:788]: INFO: signal 15 received
9(21463) INFO: <core> [main.c:788]: INFO: signal 15 received
8(21461) INFO: <core> [main.c:788]: INFO: signal 15 received
7(21454) INFO: <core> [main.c:788]: INFO: signal 15 received
6(21453) INFO: <core> [main.c:788]: INFO: signal 15 received
5(21452) INFO: <core> [main.c:788]: INFO: signal 15 received
12(21471) INFO: <core> [main.c:788]: INFO: signal 15 received
11(21465) INFO: <core> [main.c:788]: INFO: signal 15 received
0(21444) DEBUG: usrloc [urecord.c:325]: Binding
'20','sip:20@192.168.10.107:5060;transport=tcp;line=4c0o3xlb' has expired
0(21444) DEBUG: usrloc [urecord.c:325]: Binding
'30','sip:30@192.168.10.108:5060;transport=tcp;line=7rz2j81s' has expired
0(21444) DEBUG: <core> [db_pool.c:102]: removing connection from the pool
0(21444) DEBUG: tm [t_funcs.c:122]: DEBUG: tm_shutdown : start
0(21444) DEBUG: tm [t_funcs.c:125]: DEBUG: tm_shutdown : emptying hash
table
0(21444) DEBUG: tm [t_funcs.c:127]: DEBUG: tm_shutdown : removing
semaphores
0(21444) DEBUG: tm [t_funcs.c:129]: DEBUG: tm_shutdown : destroying tmcb
lists
0(21444) DEBUG: tm [t_funcs.c:132]: DEBUG: tm_shutdown : done
0(21444) DEBUG: tls [tls_init.c:621]: tls module final tls destroy
0(21444) DEBUG: <core> [mem/shm_mem.c:236]: shm_mem_destroy
0(21444) DEBUG: <core> [mem/shm_mem.c:239]: destroying the shared memory
lock
0(21444) DEBUG: <core> [main.c:741]: terminating due to SIGCHLD
kamailio -V
version: kamailio 3.0.0 (i386/linux) 6d1e9f
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, DISABLE_NAGLE,
USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
@(#) $Id$
main.c compiled on 15:09:49 Jan 29 2010 with gcc 4.1.2
Kamailio is setup with the default self-signed certificates, the telephone
is snom 320 v7.3.30.
Best regards,
Martin
-----Ursprüngliche Nachricht-----
Von: sr-users-bounces(a)lists.sip-router.org [mailto:sr-users-
bounces(a)lists.sip-router.org] Im Auftrag von Klaus Darilion
Gesendet: Freitag, 22. Januar 2010 16:07
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: [SR-Users] TLS problems
I managed to have SNOM 320 registering at kamailio-3.0 via TLS. But I
do
not have any crashes (openssl 0.9.8g-15+lenny6).
Andreas, when does the crash happen exactly: during TLS handshake or
afterwards (you can for example use "ssldump port 5061" to debug the
TLS
connection)?
regards
klaus
Andreas Rehbein schrieb:
Hi Klaus,
until now (OpenSER 1.3.x without client verification) it was not
necessary
to import certs into snom.
To force the snom to send Messages via tls, you need to insert
something
like "192.168.0.89:5061;transport=tls"
in the outbound proxy field
(but I'm
sure you already knew)
regards
Andreas
-----Ursprüngliche Nachricht-----
Von: Klaus Darilion [mailto:klaus.mailinglists@pernau.at]
Gesendet: Freitag, 22. Januar 2010 13:17
An: Andreas Rehbein
Cc: sr-users(a)lists.sip-router.org
Betreff: Re: AW: AW: AW: [SR-Users] TLS problems
Andreas Rehbein schrieb:
QjSimple.
Hello Klaus,
Linux: Red Hat Enterprise Linux 5; Kernel: 2.6.18-92.1.10.el5
OpenSSL: OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Hi Andreas!
I fail to configure SNOM to accept the certificate. I imported the CA
cert as trusted certificates, but TLS handshake is not successful. Is
there something else I need to take care of?
I'm quite sure my certificates are OK as it works with eyebeam and
regards
Klaus
_______________________________________________
sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
5414
days inactive
5421
days old
9 comments
3 participants
participants (3)
-
Andreas Rehbein -
Klaus Darilion -
Martin Koenig