Hello Pavithra, Have you tried advertising the floating IP of the VM running RTPProxy as follows? Edit /etc/default/rtpproxy file as follows: # Additional options that are passed to the daemon. EXTRA_OPTS="-l 172.24.15.30 -d DBUG:LOG_LOCAL0" here, "-l <PUBLIC_IP>" Hope it helps. Regards, Supreeth On Thu, 14 May 2020 at 13:01, Pavithra Mohanraja &lt;pavimohan3004(a)gmail.com&gt; wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Can you explain some more when you mean by "RTP alone is not coming."? And, how are you checking/verifying that? Regards, Supreeth On Thu, 14 May 2020 at 13:12, Pavithra Mohanraja &lt;pavimohan3004(a)gmail.com&gt; wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Hi David, In SDP , what need to be checked . I am not much clear in your reply . Kindly elaborate. Thanks On Thu, May 14, 2020 at 4:55 PM David Villasmil < david.villasmil.work(a)gmail.com&gt; wrote:

Hi Supreeth, I have kamailio ims installed in 4 vms inside openstack. 10.40.10.3 - pcscf in port 4060 (pcscf with NAT enabled in pcscf.cfg (!#define WITH_NAT) and configured rtpproxy) 10.40.10.12 - icscf in port 4070 10.40.10.5 - scscf in port 4080 10.40.10.30 - hss so all these vms are running in same subnet. I have a floating ip associated to pcscf. Now I have two zoiper clients outside openstack zoiper1 - 10.0.2.15 (NAT Enabled Network adaptor) zoiper2 - 10.0.2.15 when i am making a call from zoiper1 to zoiper2, call is going properly . SIP messages are coming properly in wireshark packets. when i filter for RTP packets in wireshark, it is not coming. when i have the zoiper clients inside openstack itself ,i can able to see RTP Packets in wireshark between two sip clients without any NAT related configurations done. Kindly help me. Thanks. On Thu, May 14, 2020 at 4:49 PM supreeth herle &lt;herlesupreeth(a)gmail.com&gt; wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Hi Supreeth, I have attached pcap files . kindly check and let me know. filter of rtp packets and check. *filter : sip || rtp* On Thu, May 14, 2020 at 5:15 PM supreeth herle &lt;herlesupreeth(a)gmail.com&gt; wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Thanks for the pcap. Sorry, to ask this but can you also send pcap of scenario where you see RTP packets? Also, did you restart the rtpproxy after altering the /etc/default/rtpproxy ? i.e. $ systemctl restart rtpproxy Best Regards, Supreeth On Thu, 14 May 2020 at 14:51, Pavithra Mohanraja &lt;pavimohan3004(a)gmail.com&gt; wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

HI, Hold on a moment, So i assume you are using the examples provided in the ims folder of kamailio repo right? Isn't it using RTPEngine and not RTPProxy? Or have you modified the P-CSCF configuration to work with RTPProxy? Best regards, Supreeth On Thu, 14 May 2020 at 16:39, Pavithra Mohanraja &lt;pavimohan3004(a)gmail.com&gt; wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Hello Pavithra, I have written a guide for how to integrate an IMS using Kamailio with open5gs EPC, here is the link https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/. You can find steps to setup rtpengine in that guide. Regarding requirement of rtpengine, its mandatory if you want to use the scripts in that example folder without modification. Also, read the READE of sipwise/rtpengine github repo, its very informative (in a gist rtpengine offer much more feature than rtpproxy) why can't we have sip client to sip client rtps flowing like how it is For this, i would definitely suggest to read about SIP working. This is a perfect link https://github.com/onmyway133/blog/issues/284 which offers extensive material (short and very interesting to read with examples) related to SIP. Best Regards, Supreeth On Thu, 14 May 2020 at 17:51, Pavithra Mohanraja &lt;pavimohan3004(a)gmail.com&gt; wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Hi supreeth, You have mentioned about rtpengine aswellas rrpproxy in open5g documentation . The same procedure only I have followed for rtpproxy. And one more thing , I have tried installing rtpengine but libraries are based on Ubuntu bionic . But I am using ubuntu xenial. So libraries are not getting installed properly . Did everything worked fine for you when you tried with rtpproxy for this version (5.3.3)? On Thu, May 14, 2020, 9:59 PM supreeth herle &lt;herlesupreeth(a)gmail.com&gt; wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Hello Pavithra, I have written a guide for how to integrate an IMS using Kamailio with open5gs EPC, here is the link https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/. You can find steps to setup rtpengine in that guide. Regarding requirement of rtpengine, its mandatory if you want to use the scripts in that example folder without modification. Also, read the READE of sipwise/rtpengine github repo, its very informative (in a gist rtpengine offer much more feature than rtpproxy) why can't we have sip client to sip client rtps flowing like how it is For this, i would definitely suggest to read about SIP working. This is a perfect link https://github.com/onmyway133/blog/issues/284 which offers extensive material (short and very interesting to read with examples) related to SIP. Best Regards, Supreeth On Thu, 14 May 2020 at 17:51, Pavithra Mohanraja &lt;pavimohan3004(a)gmail.com&gt; wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

reason=404 (Not Found - destination user not found on this S-CSCF)] Please check your IMPU for the IMS user in the IMS HSS (e.g. FHoSS or any other HSS you are using to enter IMS user details). SCSCF is not able to find a registered user with that IMPU (i am assuming that you are getting this response while calling) Increase the debug level on S-CSCF and check out which IMPU is being referred by SCSCF Best Regards, Supreeth On Wed, 24 Jun 2020 at 10:26, Pavithra Mohanraja &lt;pavimohan3004(a)gmail.com wrote: > Hi, > I am facing below error in kamailio-ims 5.3.4 version. > reason=404 (Not Found - destination user not found on this S-CSCF)] > could you please help me how should i proceed with and where the > registration details will be stored in kamailio ims. > It fails at this line in kamailio.cfg file in scscf . > route[FINAL_TERM] { > if (lookup("location")) { > if (uri==myself) { > if (!t_newtran()) { > sl_reply_error(); > exit; > } > xlog("Destination Not Found ----\n"); > t_reply("404","Not Found - destination user not > found on this S-CSCF"); > exit; > } > here lookup(location) means what it means. Could you please help me > Thanks, > Pavithra > On Thu, May 14, 2020 at 9:59 PM supreeth herle &lt;herlesupreeth(a)gmail.com> wrote: >> Hello Pavithra, >>> I have written a guide for how to integrate an IMS using Kamailio with >> open5gs EPC, here is the link >> https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/. You can find >> steps to setup rtpengine in that guide. >>> Regarding requirement of rtpengine, its mandatory if you want to use the >> scripts in that example folder without modification. Also, read the READE >> of sipwise/rtpengine github repo, its very informative (in a gist rtpengine >> offer much more feature than rtpproxy) >>> why can't we have sip client to sip client rtps flowing like how it is >>> happening without NAT. >>>>> For this, i would definitely suggest to read about SIP working. This is >> a perfect link https://github.com/onmyway133/blog/issues/284 which >> offers extensive material (short and very interesting to read with >> examples) related to SIP. >>> Best Regards, >> Supreeth >>>> On Thu, 14 May 2020 at 17:51, Pavithra Mohanraja < >> pavimohan3004(a)gmail.com&gt; wrote: >>>> Hi , >>>>> I didn't configure rtpengine ..instead of that only I used >>> rrpproxy..will it not work? >>>>> If not please tell me how to configure rtpengine and also tell me if it >>> is really madatory .. why can't we have sip client to sip client rtps >>> flowing like how it is happening without NAT. >>>>> That's my doubt ..please clarify .. >>>>> Thanks. >>>>> On Thu, May 14, 2020, 8:57 PM supreeth herle &lt;herlesupreeth(a)gmail.com>>> wrote: >>>>>> HI, >>>>>>> Hold on a moment, >>>>>>>>>>> 10.40.10.3 - pcscf in port 4060 (pcscf with NAT enabled in pcscf.cfg >>>>> (!#define WITH_NAT) and configured rtpproxy) >>>>> 10.40.10.12 - icscf in port 4070 >>>>> 10.40.10.5 - scscf in port 4080 >>>>> 10.40.10.30 - hss >>>>>>>>>>> So i assume you are using the examples provided in the ims folder of >>>> kamailio repo right? Isn't it using RTPEngine and not RTPProxy? Or have you >>>> modified the P-CSCF configuration to work with RTPProxy? >>>>>>> Best regards, >>>> Supreeth >>>>>>> On Thu, 14 May 2020 at 16:39, Pavithra Mohanraja < >>>> pavimohan3004(a)gmail.com&gt; wrote: >>>>>>>> Hi , >>>>> I have attached working rtp pcap file. But it is getting reverted >>>>> back to me . >>>>>>>>> As you said , i have tried restarting rtpproxy several times. but it >>>>> didnt work . >>>>>>>>>>>>>>>>> On Thu, May 14, 2020 at 7:11 PM supreeth herle < >>>>> herlesupreeth(a)gmail.com&gt; wrote: >>>>>>>>>> Thanks for the pcap. Sorry, to ask this but can you also send pcap >>>>>> of scenario where you see RTP packets? >>>>>>>>>>> Also, did you restart the rtpproxy after altering the >>>>>> /etc/default/rtpproxy ? >>>>>>>>>>> i.e. >>>>>>>>>>> $ systemctl restart rtpproxy >>>>>>>>>>> Best Regards, >>>>>> Supreeth >>>>>>>>>>> On Thu, 14 May 2020 at 14:51, Pavithra Mohanraja < >>>>>> pavimohan3004(a)gmail.com&gt; wrote: >>>>>>>>>>>> Hi Supreeth, >>>>>>> I have attached pcap files . kindly check and let me know. >>>>>>> filter of rtp packets and check. >>>>>>>>>>>>> *filter : sip || rtp* >>>>>>>>>>>>>>>>>>> On Thu, May 14, 2020 at 5:15 PM supreeth herle < >>>>>>> herlesupreeth(a)gmail.com&gt; wrote: >>>>>>>>>>>>>> Hi Pavithra, >>>>>>>>>>>>>>> Thanks for the clarification. Can you please attach a pcap of the >>>>>>>> call where you are not seeing the RTP packets? And, btw is the call getting >>>>>>>> dropped or something in that scenario? >>>>>>>>>>>>>>> Regards, >>>>>>>> Supreeth >>>>>>>>>>>>>>>>>>>>>> On Thu, 14 May 2020 at 13:34, Pavithra Mohanraja < >>>>>>>> pavimohan3004(a)gmail.com&gt; wrote: >>>>>>>>>>>>>>>> Hi Supreeth, >>>>>>>>>>>>>>>>> I have kamailio ims installed in 4 vms inside openstack. >>>>>>>>>>>>>>>>> 10.40.10.3 - pcscf in port 4060 (pcscf with NAT enabled in >>>>>>>>> pcscf.cfg (!#define WITH_NAT) and configured rtpproxy) >>>>>>>>> 10.40.10.12 - icscf in port 4070 >>>>>>>>> 10.40.10.5 - scscf in port 4080 >>>>>>>>> 10.40.10.30 - hss >>>>>>>>>>>>>>>>> so all these vms are running in same subnet. >>>>>>>>> I have a floating ip associated to pcscf. >>>>>>>>> Now I have two zoiper clients outside openstack >>>>>>>>> zoiper1 - 10.0.2.15 (NAT Enabled Network adaptor) >>>>>>>>> zoiper2 - 10.0.2.15 >>>>>>>>>>>>>>>>> when i am making a call from zoiper1 to zoiper2, call is going >>>>>>>>> properly . SIP messages are coming properly in wireshark packets. >>>>>>>>> when i filter for RTP packets in wireshark, it is not coming. >>>>>>>>>>>>>>>>>>>>>>>>> when i have the zoiper clients inside openstack itself ,i can >>>>>>>>> able to see RTP Packets in wireshark between two sip clients without any >>>>>>>>> NAT related configurations done. >>>>>>>>>>>>>>>>> Kindly help me. >>>>>>>>> Thanks. >>>>>>>>>>>>>>>>> On Thu, May 14, 2020 at 4:49 PM supreeth herle < >>>>>>>>> herlesupreeth(a)gmail.com&gt; wrote: >>>>>>>>>>>>>>>>>> Can you explain some more when you mean by "RTP alone is not >>>>>>>>>> coming."? And, how are you checking/verifying that? >>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>> Supreeth >>>>>>>>>>>>>>>>>>> On Thu, 14 May 2020 at 13:12, Pavithra Mohanraja < >>>>>>>>>> pavimohan3004(a)gmail.com&gt; wrote: >>>>>>>>>>>>>>>>>>>> Hi , >>>>>>>>>>>>>>>>>>>>> Yes I have configured as you mentioned only . In my pcscf only >>>>>>>>>>> i have rtpproxy also configured. >>>>>>>>>>> Floating IP i have given in listen address also as >>>>>>>>>>> listen = 10.40.10.3:4060 advertise 10.45.4.22:4060 >>>>>>>>>>>>>>>>>>>>> 10.40.10.3 - private ip >>>>>>>>>>> 10.45.4.22 - floating ip >>>>>>>>>>> Still RTP alone is not coming. >>>>>>>>>>>>>>>>>>>>> Is it the only way of configuring NAT ? >>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>> On Thu, May 14, 2020 at 4:37 PM supreeth herle < >>>>>>>>>>> herlesupreeth(a)gmail.com&gt; wrote: >>>>>>>>>>>>>>>>>>>>>> Hello Pavithra, >>>>>>>>>>>>>>>>>>>>>>> Have you tried advertising the floating IP of the VM running >>>>>>>>>>>> RTPProxy as follows? >>>>>>>>>>>>>>>>>>>>>>> Edit /etc/default/rtpproxy file as follows: >>>>>>>>>>>>>>>>>>>>>>> # Additional options that are passed to the daemon. >>>>>>>>>>>> EXTRA_OPTS="-l 172.24.15.30 -d DBUG:LOG_LOCAL0" >>>>>>>>>>>>>>>>>>>>>>> here, "-l <PUBLIC_IP>" >>>>>>>>>>>>>>>>>>>>>>> Hope it helps. >>>>>>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>> Supreeth >>>>>>>>>>>>>>>>>>>>>>> On Thu, 14 May 2020 at 13:01, Pavithra Mohanraja < >>>>>>>>>>>> pavimohan3004(a)gmail.com&gt; wrote: >>>>>>>>>>>>>>>>>>>>>>>> Hi , >>>>>>>>>>>>>>>>>>>>>>>>> Could anybody please give me the approach how to configure >>>>>>>>>>>>> NAT in kamailio IMS. >>>>>>>>>>>>>>>>>>>>>>>>> I have installed kamailio IMS in openstack environment which >>>>>>>>>>>>> has private ips for all four vms (each component in one vm). pcscf has one >>>>>>>>>>>>> floating IP attached. I have enabled "WITH_NAT" and configured rtpproxy . >>>>>>>>>>>>>>>>>>>>>>>>> when i make a call from outside of openstack using 2 zoiper >>>>>>>>>>>>> clients with outbound proxy keeping floating ip of pcscf, I am getting 200 >>>>>>>>>>>>> ok with all SIP packets correctly flowing but there is no RTP Packet. >>>>>>>>>>>>>>>>>>>>>>>>> When i try the same within openstack environment without >>>>>>>>>>>>> using public ip, I am getting RTP Packets. >>>>>>>>>>>>>>>>>>>>>>>>> Kindly tell me the procedure of NAT Enablement or do i need >>>>>>>>>>>>> to do anything other than this. >>>>>>>>>>>>>>>>>>>>>>>>> Kindly help because i am stuck with this for long time. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>>>>> _______________________________________________ >>>>>>> Kamailio (SER) - Users Mailing List >>>>>>> sr-users(a)lists.kamailio.org >>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>>> _______________________________________________ >>>>>> Kamailio (SER) - Users Mailing List >>>>>> sr-users(a)lists.kamailio.org >>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>> _______________________________________________ >>>>> Kamailio (SER) - Users Mailing List >>>>> sr-users(a)lists.kamailio.org >>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>> _______________________________________________ >>>> Kamailio (SER) - Users Mailing List >>>> sr-users(a)lists.kamailio.org >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>> _______________________________________________ >>> Kamailio (SER) - Users Mailing List >>> sr-users(a)lists.kamailio.org >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> sr-users(a)lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>

Hi , Could you please tell how to configure ipsec (general configuration not related to kamailio). Thanks, Pavithra On Wed, Jun 24, 2020 at 2:12 PM supreeth herle &lt;herlesupreeth(a)gmail.com&gt; wrote: > reason=404 (Not Found - destination user not found on this S-CSCF)] >> > > Please check your IMPU for the IMS user in the IMS HSS (e.g. FHoSS or any > other HSS you are using to enter IMS user details). SCSCF is not able to > find a registered user with that IMPU (i am assuming that you are getting > this response while calling) > > Increase the debug level on S-CSCF and check out which IMPU is being > referred by SCSCF > > Best Regards, > Supreeth > > On Wed, 24 Jun 2020 at 10:26, Pavithra Mohanraja &lt;pavimohan3004(a)gmail.com&gt; > wrote: > >> Hi, >> >> I am facing below error in kamailio-ims 5.3.4 version. >> >> reason=404 (Not Found - destination user not found on this S-CSCF)] >> >> could you please help me how should i proceed with and where the >> registration details will be stored in kamailio ims. >> >> It fails at this line in kamailio.cfg file in scscf . >> >> route[FINAL_TERM] { >> if (lookup("location")) { >> if (uri==myself) { >> if (!t_newtran()) { >> sl_reply_error(); >> exit; >> } >> xlog("Destination Not Found ----\n"); >> t_reply("404","Not Found - destination user not >> found on this S-CSCF"); >> exit; >> } >> >> here lookup(location) means what it means. Could you please help me >> >> >> >> Thanks, >> Pavithra >> >> On Thu, May 14, 2020 at 9:59 PM supreeth herle &lt;herlesupreeth(a)gmail.com&gt; >> wrote: >> >>> Hello Pavithra, >>> >>> I have written a guide for how to integrate an IMS using Kamailio with >>> open5gs EPC, here is the link >>> https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/. You can >>> find steps to setup rtpengine in that guide. >>> >>> Regarding requirement of rtpengine, its mandatory if you want to use >>> the scripts in that example folder without modification. Also, read the >>> READE of sipwise/rtpengine github repo, its very informative (in a gist >>> rtpengine offer much more feature than rtpproxy) >>> >>> why can't we have sip client to sip client rtps flowing like how it is >>>> happening without NAT. >>>> >>> >>> For this, i would definitely suggest to read about SIP working. This is >>> a perfect link https://github.com/onmyway133/blog/issues/284 which >>> offers extensive material (short and very interesting to read with >>> examples) related to SIP. >>> >>> Best Regards, >>> Supreeth >>> >>> >>> On Thu, 14 May 2020 at 17:51, Pavithra Mohanraja < >>> pavimohan3004(a)gmail.com&gt; wrote: >>> >>>> Hi , >>>> >>>> I didn't configure rtpengine ..instead of that only I used >>>> rrpproxy..will it not work? >>>> >>>> If not please tell me how to configure rtpengine and also tell me if >>>> it is really madatory .. why can't we have sip client to sip client rtps >>>> flowing like how it is happening without NAT. >>>> >>>> That's my doubt ..please clarify .. >>>> >>>> Thanks. >>>> >>>> On Thu, May 14, 2020, 8:57 PM supreeth herle &lt;herlesupreeth(a)gmail.com&gt; >>>> wrote: >>>> >>>>> HI, >>>>> >>>>> Hold on a moment, >>>>> >>>>> >>>>>> 10.40.10.3 - pcscf in port 4060 (pcscf with NAT enabled in pcscf.cfg >>>>>> (!#define WITH_NAT) and configured rtpproxy) >>>>>> 10.40.10.12 - icscf in port 4070 >>>>>> 10.40.10.5 - scscf in port 4080 >>>>>> 10.40.10.30 - hss >>>>>> >>>>> >>>>> So i assume you are using the examples provided in the ims folder of >>>>> kamailio repo right? Isn't it using RTPEngine and not RTPProxy? Or have you >>>>> modified the P-CSCF configuration to work with RTPProxy? >>>>> >>>>> Best regards, >>>>> Supreeth >>>>> >>>>> On Thu, 14 May 2020 at 16:39, Pavithra Mohanraja < >>>>> pavimohan3004(a)gmail.com&gt; wrote: >>>>> >>>>>> Hi , >>>>>> I have attached working rtp pcap file. But it is getting reverted >>>>>> back to me . >>>>>> >>>>>> As you said , i have tried restarting rtpproxy several times. but it >>>>>> didnt work . >>>>>> >>>>>> >>>>>> >>>>>> On Thu, May 14, 2020 at 7:11 PM supreeth herle < >>>>>> herlesupreeth(a)gmail.com&gt; wrote: >>>>>> >>>>>>> Thanks for the pcap. Sorry, to ask this but can you also send pcap >>>>>>> of scenario where you see RTP packets? >>>>>>> >>>>>>> Also, did you restart the rtpproxy after altering the >>>>>>> /etc/default/rtpproxy ? >>>>>>> >>>>>>> i.e. >>>>>>> >>>>>>> $ systemctl restart rtpproxy >>>>>>> >>>>>>> Best Regards, >>>>>>> Supreeth >>>>>>> >>>>>>> On Thu, 14 May 2020 at 14:51, Pavithra Mohanraja < >>>>>>> pavimohan3004(a)gmail.com&gt; wrote: >>>>>>> >>>>>>>> Hi Supreeth, >>>>>>>> I have attached pcap files . kindly check and let me know. >>>>>>>> filter of rtp packets and check. >>>>>>>> >>>>>>>> *filter : sip || rtp* >>>>>>>> >>>>>>>> >>>>>>>> On Thu, May 14, 2020 at 5:15 PM supreeth herle < >>>>>>>> herlesupreeth(a)gmail.com&gt; wrote: >>>>>>>> >>>>>>>>> Hi Pavithra, >>>>>>>>> >>>>>>>>> Thanks for the clarification. Can you please attach a pcap of the >>>>>>>>> call where you are not seeing the RTP packets? And, btw is the call getting >>>>>>>>> dropped or something in that scenario? >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Supreeth >>>>>>>>> >>>>>>>>> >>>>>>>>> On Thu, 14 May 2020 at 13:34, Pavithra Mohanraja < >>>>>>>>> pavimohan3004(a)gmail.com&gt; wrote: >>>>>>>>> >>>>>>>>>> Hi Supreeth, >>>>>>>>>> >>>>>>>>>> I have kamailio ims installed in 4 vms inside openstack. >>>>>>>>>> >>>>>>>>>> 10.40.10.3 - pcscf in port 4060 (pcscf with NAT enabled in >>>>>>>>>> pcscf.cfg (!#define WITH_NAT) and configured rtpproxy) >>>>>>>>>> 10.40.10.12 - icscf in port 4070 >>>>>>>>>> 10.40.10.5 - scscf in port 4080 >>>>>>>>>> 10.40.10.30 - hss >>>>>>>>>> >>>>>>>>>> so all these vms are running in same subnet. >>>>>>>>>> I have a floating ip associated to pcscf. >>>>>>>>>> Now I have two zoiper clients outside openstack >>>>>>>>>> zoiper1 - 10.0.2.15 (NAT Enabled Network adaptor) >>>>>>>>>> zoiper2 - 10.0.2.15 >>>>>>>>>> >>>>>>>>>> when i am making a call from zoiper1 to zoiper2, call is going >>>>>>>>>> properly . SIP messages are coming properly in wireshark packets. >>>>>>>>>> when i filter for RTP packets in wireshark, it is not coming. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> when i have the zoiper clients inside openstack itself ,i can >>>>>>>>>> able to see RTP Packets in wireshark between two sip clients without any >>>>>>>>>> NAT related configurations done. >>>>>>>>>> >>>>>>>>>> Kindly help me. >>>>>>>>>> Thanks. >>>>>>>>>> >>>>>>>>>> On Thu, May 14, 2020 at 4:49 PM supreeth herle < >>>>>>>>>> herlesupreeth(a)gmail.com&gt; wrote: >>>>>>>>>> >>>>>>>>>>> Can you explain some more when you mean by "RTP alone is not >>>>>>>>>>> coming."? And, how are you checking/verifying that? >>>>>>>>>>> >>>>>>>>>>> Regards, >>>>>>>>>>> Supreeth >>>>>>>>>>> >>>>>>>>>>> On Thu, 14 May 2020 at 13:12, Pavithra Mohanraja < >>>>>>>>>>> pavimohan3004(a)gmail.com&gt; wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi , >>>>>>>>>>>> >>>>>>>>>>>> Yes I have configured as you mentioned only . In my pcscf only >>>>>>>>>>>> i have rtpproxy also configured. >>>>>>>>>>>> Floating IP i have given in listen address also as >>>>>>>>>>>> listen = 10.40.10.3:4060 advertise 10.45.4.22:4060 >>>>>>>>>>>> >>>>>>>>>>>> 10.40.10.3 - private ip >>>>>>>>>>>> 10.45.4.22 - floating ip >>>>>>>>>>>> Still RTP alone is not coming. >>>>>>>>>>>> >>>>>>>>>>>> Is it the only way of configuring NAT ? >>>>>>>>>>>> >>>>>>>>>>>> Thanks. >>>>>>>>>>>> >>>>>>>>>>>> On Thu, May 14, 2020 at 4:37 PM supreeth herle < >>>>>>>>>>>> herlesupreeth(a)gmail.com&gt; wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hello Pavithra, >>>>>>>>>>>>> >>>>>>>>>>>>> Have you tried advertising the floating IP of the VM running >>>>>>>>>>>>> RTPProxy as follows? >>>>>>>>>>>>> >>>>>>>>>>>>> Edit /etc/default/rtpproxy file as follows: >>>>>>>>>>>>> >>>>>>>>>>>>> # Additional options that are passed to the daemon. >>>>>>>>>>>>> EXTRA_OPTS="-l 172.24.15.30 -d DBUG:LOG_LOCAL0" >>>>>>>>>>>>> >>>>>>>>>>>>> here, "-l <PUBLIC_IP>" >>>>>>>>>>>>> >>>>>>>>>>>>> Hope it helps. >>>>>>>>>>>>> >>>>>>>>>>>>> Regards, >>>>>>>>>>>>> Supreeth >>>>>>>>>>>>> >>>>>>>>>>>>> On Thu, 14 May 2020 at 13:01, Pavithra Mohanraja < >>>>>>>>>>>>> pavimohan3004(a)gmail.com&gt; wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hi , >>>>>>>>>>>>>> >>>>>>>>>>>>>> Could anybody please give me the approach how to configure >>>>>>>>>>>>>> NAT in kamailio IMS. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have installed kamailio IMS in openstack environment which >>>>>>>>>>>>>> has private ips for all four vms (each component in one vm). pcscf has one >>>>>>>>>>>>>> floating IP attached. I have enabled "WITH_NAT" and configured rtpproxy . >>>>>>>>>>>>>> >>>>>>>>>>>>>> when i make a call from outside of openstack using 2 zoiper >>>>>>>>>>>>>> clients with outbound proxy keeping floating ip of pcscf, I am getting 200 >>>>>>>>>>>>>> ok with all SIP packets correctly flowing but there is no RTP Packet. >>>>>>>>>>>>>> >>>>>>>>>>>>>> When i try the same within openstack environment without >>>>>>>>>>>>>> using public ip, I am getting RTP Packets. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Kindly tell me the procedure of NAT Enablement or do i need >>>>>>>>>>>>>> to do anything other than this. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Kindly help because i am stuck with this for long time. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>>>>> >>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>> sr-users(a)lists.kamailio.org >>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>> >>>>>>> _______________________________________________ >>>>>>> Kamailio (SER) - Users Mailing List >>>>>>> sr-users(a)lists.kamailio.org >>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>> >>>>>> _______________________________________________ >>>>>> Kamailio (SER) - Users Mailing List >>>>>> sr-users(a)lists.kamailio.org >>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>> >>>>> _______________________________________________ >>>>> Kamailio (SER) - Users Mailing List >>>>> sr-users(a)lists.kamailio.org >>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>> >>>> _______________________________________________ >>>> Kamailio (SER) - Users Mailing List >>>> sr-users(a)lists.kamailio.org >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>> >>> _______________________________________________ >>> Kamailio (SER) - Users Mailing List >>> sr-users(a)lists.kamailio.org >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>> >>

Hi Pavithra, Thanks for the clarification. Can you please attach a pcap of the call where you are not seeing the RTP packets? And, btw is the call getting dropped or something in that scenario? Regards, Supreeth On Thu, 14 May 2020 at 13:34, Pavithra Mohanraja &lt;pavimohan3004(a)gmail.com&gt; wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users