hi, First we signed in a(a)localhost.localdomain and which will subscribe b(a)localhost.localdomain's presence info. Yes, we do receive 200 OK for that SUBSCRIBE. After that SER keep sending NOTIFY to a(a)localhost.localdomin with status "closed", even after b(a)localhost.localdomain signed in, and b also get same staff. We expect to receive NOTIFY with status online on both side. Can you help us ? the ser.cfg is attached below. thanks, hong ----- Original Message ----- From: "Jan Janak" <jan(a)iptel.org> To: "hong cheng" <chenhong(a)public.sta.net.cn> Cc: <serusers(a)iptel.org> Sent: Friday, December 05, 2003 1:09 AM Subject: Re: [Serusers] help for PA can not work with MS messager 5.0 > What exactly is not working ? Do you get any 200 OK for the SUBSCRIBE > followed by a NOTIFY ? > > Jan. > > On 04-12 11:41, hong cheng wrote: > > hi all, > > > > Try to use presence feature with MS messager 5.0, seems SUBSCRIBER can not work. > > Can anybody have a look for the attached ser.cfg ? > > > > Many thanks, > > hong > > > > ---------------------------------- > > > > #debug=4 # debug level (cmd line: -dddddddddd) > > #listen=192.168.8.96 > > #fork=no > > #log_stderror=yes # (cmd line: -E) > > > > #debug=7 > > #fork=no > > #log_stderror=yes > > > > check_via=no # (cmd. line: -v) > > dns=no # (cmd. line: -r) > > rev_dns=no # (cmd. line: -R) > > port=5060 > > children=4 > > fifo="/tmp/ser_fifo" > > > > # ------------------ module loading ---------------------------------- > > > > # Uncomment this if you want to use SQL database > > #loadmodule "/usr/local/lib/ser/modules/mysql.so" > > > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > loadmodule "/usr/local/lib/ser/modules/pa.so" > > > > > > > > # Uncomment this if you want digest authentication > > # mysql.so must be loaded ! > > #loadmodule "/usr/local/lib/ser/modules/auth.so" > > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > # ----------------- setting module-specific parameters --------------- > > > > # -- usrloc params -- > > > > modparam("usrloc", "db_mode", 0) > > > > # Uncomment this if you want to use SQL database > > # for persistent storage and comment the previous line > > #modparam("usrloc", "db_mode", 2) > > > > # -- auth params -- > > # Uncomment if you are using auth module > > # > > #modparam("auth_db", "calculate_ha1", yes) > > # > > # If you set "calculate_ha1" parameter to yes (which true in this config), > > # uncomment also the following parameter) > > # > > #modparam("auth_db", "password_column", "password") > > > > # -- rr params -- > > # add value to ;lr param to make some broken UAs happy > > modparam("rr", "enable_full_lr", 1) > > # ------------------------- request routing logic ------------------- > > > > # main routing logic > > > > > > route{ > > > > # initial sanity checks -- messages with > > # max_forwards==0, or excessively long requests > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483","Too Many Hops"); > > break; > > }; > > if ( msg:len > max_len ) { > > sl_send_reply("513", "Message too big"); > > break; > > }; > > > > # we record-route all messages -- to make sure that > > # subsequent messages will go through our proxy; that's > > # particularly good if upstream and downstream entities > > # use different transport protocol > > record_route(); > > # loose-route processing > > if (loose_route()) { > > t_relay(); > > break; > > }; > > > > # if the request is for other domain use UsrLoc > > # (in case, it does not work, use the following command > > # with proper names and addresses in it) > > if (uri==myself) { > > > > if (method=="REGISTER") { > > > > # Uncomment this if you want to use digest authentication > > # if (!www_authorize("iptel.org", "subscriber")) { > > # www_challenge("iptel.org", "0"); > > # break; > > # }; > > > > save("location"); > > break; > > }; > > > > if (method=="SUBSCRIBE") { > > if (t_newtran()) { > > handle_subscription("registrar"); > > }; > > break; > > }; > > > > # native SIP destinations are handled using our USRLOC DB > > if (!lookup("location")) { > > sl_send_reply("404", "Not Found"); > > break; > > }; > > }; > > # forward to current uri now; use stateful forwarding; that > > # works reliably even if we forward from TCP to UDP > > if (!t_relay()) { > > sl_reply_error(); > > }; > > > > } > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)iptel.org > > http://mail.iptel.org/mailman/listinfo/serusers > >