#
# $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/openser_fifo"
#
# uncomment the following lines for TLS support
#disable_tls = 0
#listen = tls:your_IP:5061
#tls_verify = 1
#tls_require_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/openser/modules/mysql.so"
loadmodule "/usr/local/lib/openser/modules/sl.so"
loadmodule "/usr/local/lib/openser/modules/tm.so"
loadmodule "/usr/local/lib/openser/modules/rr.so"
loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
loadmodule "/usr/local/lib/openser/modules/usrloc.so"
loadmodule "/usr/local/lib/openser/modules/registrar.so"
loadmodule "/usr/local/lib/openser/modules/textops.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/openser/modules/auth.so"
#loadmodule "/usr/local/lib/openser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
#if(uri=~"(a)tls_domain1.net") {
# t_relay_to_tls("IP_domain1","port_domain1");
# exit;
#} else if(uri=~"(a)tls_domain2.net") {
# t_relay_to_tls("IP_domain2","port_domain2");
# exit;
#}
route(1);
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
#if (!www_authorize("openser.org",
"subscriber")) {
# www_challenge("openser.org", "0");
# exit;
#};
save("location");
exit;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
route(1);
}
route[1] {
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
exit;
}
_____
From: ram [mailto:talk2ram@gmail.com]
Sent: Friday, June 09, 2006 1:33 AM
To: Kelvin Williams
Subject: Re: [Users] openserctl error.
post ur config file to assist
ram
On 6/9/06, Kelvin Williams <kelvin-lists(a)williamschadwell.com> wrote:
This is a new OpenSER installation on a Solaris 10 box.
Any time we call openserctl we receive the following error:
/usr/local/sbin/openserctl: syntax error at line 1026: `GW_IP=$' unexpected
Line 26 of openserctl reads:
GW_IP=$(($1+$2*256+$3*65536+$4*16777216))
Any advice would be greatly appreciated!
Thanks,
kw
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users