Hi SER users I am trying to test SER+FreeRadius (for accounting) and iam getting the follwing errors in log messages

ERROR MESSAGES:-(

localhost /usr/local/sbin/ser[3503]: Maxfwd module- initializing localhost ser[3503]: ERROR: acc: can't get code for the Sip-Translated-Request-URI attribute localhost ser[3503]: init_mod(): Error while initializing module acc

even then i changed the Attribute i am getting the same error please help regard this issue

my SER.cfg looks like this

loadmodule "/usr/local/lib/ser/modules/acc.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- acc params --

# set the reporting log level modparam("acc", "log_level", 1) # number of flag, which will be used for accounting; if a message is # labeled with this flag, its completion status will be reported modparam("acc", "radius_flag", 1 ) modparam("acc", "radius_missed_flag", 2) modparam("acc", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "service_type", 15) # -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route();

# subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; };

if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("81.21.34.37", "subscriber")) { www_challenge("81.21.34.37", "0"); break; };

save("location"); break; };

lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; };

# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); }

route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }